Overclock.net › Forums › Components › Hard Drives & Storage › SSD › Is there something wrong with my Vertex2???
New Posts  All Forums:Forum Nav:

Is there something wrong with my Vertex2???

post #1 of 25
Thread Starter 
So a member sent me a link to run a benchmark on my SSD. My test results I think are terrible compared to my friends Intel 80GB, my speeds are about 1/2 in every column compared to his Intel SSD... anyone know why or what is wrong???

Its an OCZ Vertex 2 60GB SSD... I'm not sure what it means when it says 31K-BAD just above the drive size.

I've been contemplating buying a 120GB OCZ Agility3 to replace the smallish 60GB Vertex2. I'm starting to think I need to make sure my system isn't flawed or else getting the SATA 3 Agility would/could be pointless... My mobo has native SATA 3 so that is a plus.. i think.

    
CPUMotherboardGraphicsRAM
Phenom II X6 1090T BE ASUS M4A89GTD PRO EVGA GTX 680 CLASSIFIED 4GB 16 GB G.Skill Ripjaws X Series PC3-10666 DC DDR3 
Hard DriveHard DriveOptical DriveOS
Crucial M4  Seagate Barracuda SATA III LG BluRay RW Drive Windows 7 Pro 64-Bit 
MonitorKeyboardPowerCase
23" LG W2353 LCD Monitors x2 Logitech G510 Corsair TX850 V2 Zalman Z9 
MouseMouse PadAudio
Saitek Cyborg R.A.T. 7 Steel Series QcK Gaming Mouse Pad Bose Companion Speakers 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Phenom II X6 1090T BE ASUS M4A89GTD PRO EVGA GTX 680 CLASSIFIED 4GB 16 GB G.Skill Ripjaws X Series PC3-10666 DC DDR3 
Hard DriveHard DriveOptical DriveOS
Crucial M4  Seagate Barracuda SATA III LG BluRay RW Drive Windows 7 Pro 64-Bit 
MonitorKeyboardPowerCase
23" LG W2353 LCD Monitors x2 Logitech G510 Corsair TX850 V2 Zalman Z9 
MouseMouse PadAudio
Saitek Cyborg R.A.T. 7 Steel Series QcK Gaming Mouse Pad Bose Companion Speakers 
  hide details  
Reply
post #2 of 25
I see two problems:
  1. It's not aligned properly (that's why it says "31 K - BAD")
  2. AHCI mode needs to be enabled

Unfortunately, the only way I personally know of to get the drive properly aligned involves formatting and starting over. However, switching to AHCI mode is easy:


[source]

Change from IDE to AHCI Mode after Installation

Information: AHCI stand for Advance Host Controller Interface. AHCI is a hardware mechanism that allows software to communicate with Serial ATA (SATA) devices (such as host bus adapters) that are designed to offer features not offered by Parallel ATA (PATA) controllers, such as:
  • Hot-Plugging
  • Native Command Queuing (NCQ) -might improve computer/system/hard disk responsiveness, especially in multi-tasking environment
You can read more about AHCI mode HERE

Instruction: There is one way to fix this, although you need to have knowledge of registry editing.
The detailed steps from Microsoft website are as follows:
  • Exit all Windows-based programs.
  • Press [Win] + R or take the RUN option from the start menu.
  • Now type regedit there and press Enter Key to open up the Registry Editor Window.
  • If you receive the User Account Control dialog box, click Continue.
  • Locate and then click the following registry subkey:
    HKEY_LOCAL_MACHINE\\System\\CurrentControlSet\\Ser vic es\\msahci
  • In the right pane, right-click Start in the Name column, and then click Modify.

  • In the Value data box, type 0 [3 is default], and then click OK.
  • On the File menu, click Exit to close Registry Editor.
  • Restart your computer
  • Go to BIOS and enable AHCI, Save & Reboot
  • Another restart will be required to finish the driver installation.

Alternatively

Just download this Reg File and double-click to implement AHCI on your Windows-based computer.
Just remember to do the BIOS switch as well when you reboot.




There should be an improvement in the benchmark after just switching to AHCI mode, however I still recommend getting the drive properly aligned to 1024K. If you're up to it, then I would be happy to show you how.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #3 of 25
I believe you don't need to do anything to set to AHCI mode but use this MS hotfix
http://support.microsoft.com/kb/922976
then set in bios.Worked perfectly for me!
Amelia
(13 items)
 
Professional
(13 items)
 
RCPC#1
(17 items)
 
CPUMotherboardGraphicsRAM
Phenom II X6 1100t MSI 890FX GD65 MSI Radeon HD5670 GSkill RipjawsX DDR3 PC3 12800 2x4GB CL8 
Hard DriveOptical DriveCoolingOS
WD Black 1TB SATA III Samsung BD Zalman 9900MAX Windows 7 64 Professional 
MonitorKeyboardPowerCase
AOC 22" LED Logitech Kingwin Lazer Platinum 500w Fractal Design R3 
Other
Samsung 470 SSD 128GB 
CPUMotherboardGraphicsRAM
AMD Phenom II X6 960T Asus M4A88T-VEVO Asus Strix R7 370 SuperTalent Perfomance 
RAMHard DriveHard DriveOptical Drive
GSkill Snipers Monster Daytona Seagate Barracuda 500GB 7,200 RPM 16Mb cache Memorex DVD/RW 
CoolingOSMonitorKeyboard
Corsair H60 Windows 8N IBM 9494 19" LCD IBM 
PowerCaseMouseMouse Pad
Corsair GS500 In Win H-Frame Wolfking OCZ Behemoth 
Audio
JBL Creature 
  hide details  
Reply
Amelia
(13 items)
 
Professional
(13 items)
 
RCPC#1
(17 items)
 
CPUMotherboardGraphicsRAM
Phenom II X6 1100t MSI 890FX GD65 MSI Radeon HD5670 GSkill RipjawsX DDR3 PC3 12800 2x4GB CL8 
Hard DriveOptical DriveCoolingOS
WD Black 1TB SATA III Samsung BD Zalman 9900MAX Windows 7 64 Professional 
MonitorKeyboardPowerCase
AOC 22" LED Logitech Kingwin Lazer Platinum 500w Fractal Design R3 
Other
Samsung 470 SSD 128GB 
CPUMotherboardGraphicsRAM
AMD Phenom II X6 960T Asus M4A88T-VEVO Asus Strix R7 370 SuperTalent Perfomance 
RAMHard DriveHard DriveOptical Drive
GSkill Snipers Monster Daytona Seagate Barracuda 500GB 7,200 RPM 16Mb cache Memorex DVD/RW 
CoolingOSMonitorKeyboard
Corsair H60 Windows 8N IBM 9494 19" LCD IBM 
PowerCaseMouseMouse Pad
Corsair GS500 In Win H-Frame Wolfking OCZ Behemoth 
Audio
JBL Creature 
  hide details  
Reply
post #4 of 25
I bet that all the hotfix does is change the Registry in the way described above.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #5 of 25
Thread Starter 
Thanks, I'll run the AHCI fix tonight, will that correct the speed issues? Also, is there no other way to properly align the drive without doing a clean install/format?

I'm wondering if I should just pick up a SATA III SSD and start fresh. It's not a huge hassle as I haven't entered my windows product key yet and don't have that much installed on the SSD as of yet.
    
CPUMotherboardGraphicsRAM
Phenom II X6 1090T BE ASUS M4A89GTD PRO EVGA GTX 680 CLASSIFIED 4GB 16 GB G.Skill Ripjaws X Series PC3-10666 DC DDR3 
Hard DriveHard DriveOptical DriveOS
Crucial M4  Seagate Barracuda SATA III LG BluRay RW Drive Windows 7 Pro 64-Bit 
MonitorKeyboardPowerCase
23" LG W2353 LCD Monitors x2 Logitech G510 Corsair TX850 V2 Zalman Z9 
MouseMouse PadAudio
Saitek Cyborg R.A.T. 7 Steel Series QcK Gaming Mouse Pad Bose Companion Speakers 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Phenom II X6 1090T BE ASUS M4A89GTD PRO EVGA GTX 680 CLASSIFIED 4GB 16 GB G.Skill Ripjaws X Series PC3-10666 DC DDR3 
Hard DriveHard DriveOptical DriveOS
Crucial M4  Seagate Barracuda SATA III LG BluRay RW Drive Windows 7 Pro 64-Bit 
MonitorKeyboardPowerCase
23" LG W2353 LCD Monitors x2 Logitech G510 Corsair TX850 V2 Zalman Z9 
MouseMouse PadAudio
Saitek Cyborg R.A.T. 7 Steel Series QcK Gaming Mouse Pad Bose Companion Speakers 
  hide details  
Reply
post #6 of 25
In addition to all that has been said, AS SSD does not like all drives or controllers. Run ATTO benchmark and see what results you get.
Edited by PhillyOverclocker - 6/8/11 at 8:05am
My System
(17 items)
 
  
CPUMotherboardGraphicsGraphics
AMD Phenom II X4 955  Gigabyte GA-MA790XT-UD4P Sapphire HD 6950 Sapphire HD 6950 
RAMHard DriveHard DriveOptical Drive
G-Skill Mushkin Callisto Deluxe WD Black LG Supermulti 
CoolingOSKeyboardPower
Rasa Black CPU water block. Rasa X20 pump/res c... Windows 7 Ultimate x64 Deck Legend Fire mechanical with Cherry Black s... Cooler Master Silent Pro Gold 1200W modular PSU. 
CaseMouseAudio
Cooler Master Storm Scout Logitech MX-518 Logitech Wireless headset for gaming and 100w M... 
  hide details  
Reply
My System
(17 items)
 
  
CPUMotherboardGraphicsGraphics
AMD Phenom II X4 955  Gigabyte GA-MA790XT-UD4P Sapphire HD 6950 Sapphire HD 6950 
RAMHard DriveHard DriveOptical Drive
G-Skill Mushkin Callisto Deluxe WD Black LG Supermulti 
CoolingOSKeyboardPower
Rasa Black CPU water block. Rasa X20 pump/res c... Windows 7 Ultimate x64 Deck Legend Fire mechanical with Cherry Black s... Cooler Master Silent Pro Gold 1200W modular PSU. 
CaseMouseAudio
Cooler Master Storm Scout Logitech MX-518 Logitech Wireless headset for gaming and 100w M... 
  hide details  
Reply
post #7 of 25
Thread Starter 
TwoCables: thanks for the help, I'll do the AHCI fix.

I want to optimize my drive and properly align it, can you help me out with that?

I'm contemplating picking up a 120GB SATA 3 SSD and starting over..
    
CPUMotherboardGraphicsRAM
Phenom II X6 1090T BE ASUS M4A89GTD PRO EVGA GTX 680 CLASSIFIED 4GB 16 GB G.Skill Ripjaws X Series PC3-10666 DC DDR3 
Hard DriveHard DriveOptical DriveOS
Crucial M4  Seagate Barracuda SATA III LG BluRay RW Drive Windows 7 Pro 64-Bit 
MonitorKeyboardPowerCase
23" LG W2353 LCD Monitors x2 Logitech G510 Corsair TX850 V2 Zalman Z9 
MouseMouse PadAudio
Saitek Cyborg R.A.T. 7 Steel Series QcK Gaming Mouse Pad Bose Companion Speakers 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Phenom II X6 1090T BE ASUS M4A89GTD PRO EVGA GTX 680 CLASSIFIED 4GB 16 GB G.Skill Ripjaws X Series PC3-10666 DC DDR3 
Hard DriveHard DriveOptical DriveOS
Crucial M4  Seagate Barracuda SATA III LG BluRay RW Drive Windows 7 Pro 64-Bit 
MonitorKeyboardPowerCase
23" LG W2353 LCD Monitors x2 Logitech G510 Corsair TX850 V2 Zalman Z9 
MouseMouse PadAudio
Saitek Cyborg R.A.T. 7 Steel Series QcK Gaming Mouse Pad Bose Companion Speakers 
  hide details  
Reply
post #8 of 25
I think I read of a way to align it but it is not very straightforward. Not worth the effort IMO. It would be quicker to back up all the data and reinstall Windows 7 from scratch.
post #9 of 25
Quote:
Originally Posted by Slayer33 View Post
Thanks, I'll run the AHCI fix tonight, will that correct the speed issues? Also, is there no other way to properly align the drive without doing a clean install/format?
The only way I know of to align the drive involves formatting the drive because the partition has to be deleted and recreated too.

Also, I think that switching to AHCI mode alone should provide you with a slightly noticeable performance boost.

Quote:
Originally Posted by Slayer33 View Post
I'm wondering if I should just pick up a SATA III SSD and start fresh. It's not a huge hassle as I haven't entered my windows product key yet and don't have that much installed on the SSD as of yet.
Then let's just get the Vertex 2 properly aligned and see what happens.


Quote:
Originally Posted by Slayer33 View Post
TwoCables: thanks for the help, I'll do the AHCI fix.

I want to optimize my drive and properly align it, can you help me out with that?

I'm contemplating picking up a 120GB SATA 3 SSD and starting over..
If you're contemplating doing that, then let's just start over on the Vertex 2.

First, let's begin by using Secure Erase (a.k.a. "HDDErase") by following these instructions to the letter:

http://www.ocztechnologyforum.com/fo...o-use-HDDErase

The benefit of using this is it returns the drive to factory, like-new condition (concerning its performance).


After that, switch to AHCI mode in the BIOS.

Once you're finished switching over to AHCI mode, install Windows as described below in order to get the drive properly aligned:
  1. Disconnect any/all other hard drives and/or solid state drives and only leave the Vertex 2 connected. This avoids getting the boot sector placed on one of the other drives (for some reason, Windows 7's installer likes to place it on other drives).
  2. Boot from the Windows 7 installation DVD
  3. When you see the "Install now" button, click "Repair your computer" (screenshot)
  4. You'll see a little window named "System Recovery Options" appear that searches for Windows installations.
  5. When it finishes, you will see a dialog box. Select "Use recovery tools that can help fix problems starting Windows. Select an operating system to repair.", and then click Next.
  6. Click "Command Prompt"
  7. Type diskpart and then press Enter to load DiskPart
  8. Type list disk and press Enter
  9. Type select disk 0 (or whichever number your SSD gets) and press Enter
  10. If you want to be sure you have the correct drive selected, then type list partition and press Enter.
  11. Once you've confirmed that you have the correct drive selected, type clean and press Enter.
  12. Type create partition primary align=1024 and press Enter
  13. Type format quick fs=ntfs and press Enter
  14. It will appear like it's going to take forever because it just sits at 0% for a while, but then it suddenly jumps to 100% after about 10 seconds, give or take a few.
  15. Type active and press Enter
  16. Type list partition and press Enter to see your creation.
  17. Type exit and press Enter
  18. Type exit and press Enter
  19. Click "Restart"
  20. Boot from the DVD again and perform a normal installation using the "Custom (advanced)" type of installation (screenshot to show where this is)
  21. Do not click "Drive options (advanced)". Just select the Vertex 2 and click Next to begin installing Windows 7 (screenshot).


So to summarize:
  1. Boot from the Windows 7 DVD
  2. Click "Repair your computer"
  3. Select "Use recovery tools that can help fix problems starting Windows. Select an operating system to repair."
  4. Click "Command Prompt"
  5. Type diskpart
  6. Type list disk
  7. Type select disk 0 (or whichever number it turns out to be)
  8. Type clean
  9. Type create partition primary align=1024
  10. Type format quick fs=ntfs
  11. Type active
  12. Type exit
  13. Type exit
  14. Click Restart
  15. Install Windows 7 without formatting or anything
  16. Once you're ready to begin installing your programs, check out AS SSD as well as ATTO Disk Benchmark (free download from Softpedia here).


That's everything!
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #10 of 25
Thread Starter 
Thanks TwoCables. I will try this if I can't get the regedit/AHCI fix working...

So far I haven't had any luck.. I changed the regedit value for the AHCI as described through the run cmd and that worked, but when I go to change it in the BIOS and then save/exit my PC stalls and won't boot up.. all i see after the post is a flashing cursor.

It no longer recognizes my drives, if I reboot and switch back to IDE and exit it works fine, but doesn't work when i switch back to AHCI in the BIOS...

any ideas?
    
CPUMotherboardGraphicsRAM
Phenom II X6 1090T BE ASUS M4A89GTD PRO EVGA GTX 680 CLASSIFIED 4GB 16 GB G.Skill Ripjaws X Series PC3-10666 DC DDR3 
Hard DriveHard DriveOptical DriveOS
Crucial M4  Seagate Barracuda SATA III LG BluRay RW Drive Windows 7 Pro 64-Bit 
MonitorKeyboardPowerCase
23" LG W2353 LCD Monitors x2 Logitech G510 Corsair TX850 V2 Zalman Z9 
MouseMouse PadAudio
Saitek Cyborg R.A.T. 7 Steel Series QcK Gaming Mouse Pad Bose Companion Speakers 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Phenom II X6 1090T BE ASUS M4A89GTD PRO EVGA GTX 680 CLASSIFIED 4GB 16 GB G.Skill Ripjaws X Series PC3-10666 DC DDR3 
Hard DriveHard DriveOptical DriveOS
Crucial M4  Seagate Barracuda SATA III LG BluRay RW Drive Windows 7 Pro 64-Bit 
MonitorKeyboardPowerCase
23" LG W2353 LCD Monitors x2 Logitech G510 Corsair TX850 V2 Zalman Z9 
MouseMouse PadAudio
Saitek Cyborg R.A.T. 7 Steel Series QcK Gaming Mouse Pad Bose Companion Speakers 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: SSD
Overclock.net › Forums › Components › Hard Drives & Storage › SSD › Is there something wrong with my Vertex2???