Overclock.net › Forums › Components › Memory › Kingstom 1333mhz 2x2 Kit, can't go above 275 FSB
New Posts  All Forums:Forum Nav:

Kingstom 1333mhz 2x2 Kit, can't go above 275 FSB

post #1 of 7
Thread Starter 
So yeah, even at 1160mhz and 7-8-7-22 and 1.54v it wont pass blend at 290 FSB. Anything over 275 FSB causes the ram to go horribly unstable, no matter what setting. 9-9-9 won't even boot at 290 FSB somewhy, but 7-8-7 does. What do I do? I can't get any better RAM so I have to work around this.

Increasing CPU/NB from 1.125v to 1.225v or 1.3v doesn't help at all.
Edited by Devilmaypoop - 6/8/11 at 3:07am
..
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3445MHZ 1.2V/ SB Pentium G620@0.84v ASUS M4A79XTD EVO/ ASUS P8P67 Sapphire 6870/ Club 3D 5770 2x2gb Kingston DDR3 1333mhz @ 1467mhz 7-7-7-17 
Hard DriveOSPower
Samsung Spinpoint F3 1TB Windows 7 Home 64bit Corsair 600W 
  hide details  
Reply
..
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3445MHZ 1.2V/ SB Pentium G620@0.84v ASUS M4A79XTD EVO/ ASUS P8P67 Sapphire 6870/ Club 3D 5770 2x2gb Kingston DDR3 1333mhz @ 1467mhz 7-7-7-17 
Hard DriveOSPower
Samsung Spinpoint F3 1TB Windows 7 Home 64bit Corsair 600W 
  hide details  
Reply
post #2 of 7
Max HTT should not be limited by the RAM, if you know what you are doing.
I would say that the limit of the HTT is due to the board or CPU.
RAM can be easily readjusted to lower speeds if needed.
What does Memtest say ?!
   
AMD HTPC
(13 items)
 
CPUMotherboardGraphicsRAM
AMD FX 6300  Asus Sabertooth 990FX R 2.0 Sapphire 6950 unlocked Geil 
Hard DriveOptical DriveCoolingOS
WD Sony Corsair H60 Mepis Tetris 
MonitorKeyboardPowerCase
LG HD  Logitech G11 OCZ 750 F1 Nexus Clodius Black 
MouseMouse PadAudio
Logitech G5R Mionix Creative X-Fi Xteme Music 
CPUMotherboardGraphicsRAM
AMD Athlon 860K MSI A88X-G41 PC Mate Sapphire R7 265 Crucial Elite 2 X 4 
Hard DriveOptical DriveCoolingOS
WD /Seagate Optiarc/LG Cooler Master Hyper TX2 Mepis Tetris 
MonitorKeyboardPowerCase
LG HD  Logitech generic Corsair CS650 Nexus Clodius White 
MouseMouse PadAudio
A4 Crap Mionix Anus Xonar D1 
CPUMotherboardGraphicsRAM
AMD Athlon 5150 ASUS AM1M-A  IGD Crucial 2X2G 
Hard DriveOptical DriveCoolingOS
Seagate 640Gb junk SONY DVD-RW Stock OpenSuse/Ubuntu 
MonitorKeyboardPowerCase
LED TV Logitech wireless FSP Foxconn 
Mouse
Logitech wireless 
  hide details  
Reply
   
AMD HTPC
(13 items)
 
CPUMotherboardGraphicsRAM
AMD FX 6300  Asus Sabertooth 990FX R 2.0 Sapphire 6950 unlocked Geil 
Hard DriveOptical DriveCoolingOS
WD Sony Corsair H60 Mepis Tetris 
MonitorKeyboardPowerCase
LG HD  Logitech G11 OCZ 750 F1 Nexus Clodius Black 
MouseMouse PadAudio
Logitech G5R Mionix Creative X-Fi Xteme Music 
CPUMotherboardGraphicsRAM
AMD Athlon 860K MSI A88X-G41 PC Mate Sapphire R7 265 Crucial Elite 2 X 4 
Hard DriveOptical DriveCoolingOS
WD /Seagate Optiarc/LG Cooler Master Hyper TX2 Mepis Tetris 
MonitorKeyboardPowerCase
LG HD  Logitech generic Corsair CS650 Nexus Clodius White 
MouseMouse PadAudio
A4 Crap Mionix Anus Xonar D1 
CPUMotherboardGraphicsRAM
AMD Athlon 5150 ASUS AM1M-A  IGD Crucial 2X2G 
Hard DriveOptical DriveCoolingOS
Seagate 640Gb junk SONY DVD-RW Stock OpenSuse/Ubuntu 
MonitorKeyboardPowerCase
LED TV Logitech wireless FSP Foxconn 
Mouse
Logitech wireless 
  hide details  
Reply
post #3 of 7
Thread Starter 
I've tested Memtest too, and it craps out almost instantly spamming me with errors. I had 4 threads of it running with each having 500 MB memory. Before I suspected my board hit the FSB wall, but now I'm thinking it might be the RAM.

Small FFT's and LinX run fine with no errors at all, but when I run Blend it errors within 2 minutes, because it tests a lot of RAM.
..
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3445MHZ 1.2V/ SB Pentium G620@0.84v ASUS M4A79XTD EVO/ ASUS P8P67 Sapphire 6870/ Club 3D 5770 2x2gb Kingston DDR3 1333mhz @ 1467mhz 7-7-7-17 
Hard DriveOSPower
Samsung Spinpoint F3 1TB Windows 7 Home 64bit Corsair 600W 
  hide details  
Reply
..
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3445MHZ 1.2V/ SB Pentium G620@0.84v ASUS M4A79XTD EVO/ ASUS P8P67 Sapphire 6870/ Club 3D 5770 2x2gb Kingston DDR3 1333mhz @ 1467mhz 7-7-7-17 
Hard DriveOSPower
Samsung Spinpoint F3 1TB Windows 7 Home 64bit Corsair 600W 
  hide details  
Reply
post #4 of 7
Thread Starter 
Okay, I think I fixed the problem by bumping the RAM voltage from 1.54v to 1.58v. It shows 1.6v in HWmonitor. Is this a safe voltage for the RAM?
..
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3445MHZ 1.2V/ SB Pentium G620@0.84v ASUS M4A79XTD EVO/ ASUS P8P67 Sapphire 6870/ Club 3D 5770 2x2gb Kingston DDR3 1333mhz @ 1467mhz 7-7-7-17 
Hard DriveOSPower
Samsung Spinpoint F3 1TB Windows 7 Home 64bit Corsair 600W 
  hide details  
Reply
..
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3445MHZ 1.2V/ SB Pentium G620@0.84v ASUS M4A79XTD EVO/ ASUS P8P67 Sapphire 6870/ Club 3D 5770 2x2gb Kingston DDR3 1333mhz @ 1467mhz 7-7-7-17 
Hard DriveOSPower
Samsung Spinpoint F3 1TB Windows 7 Home 64bit Corsair 600W 
  hide details  
Reply
post #5 of 7
Just look at the website of the manufacturer...

ussualy its safe up to 1.65v... but check the website if you want to know sure.
Blazer
(8 items)
 
  
CPUMotherboardRAMHard Drive
Intel i7 4790K MSI MPower Z97 Adata XPG 2x8GB DDR3-2600 Crucial M500 120GB SSD 
Hard DriveHard DriveHard DrivePower
Samsung 830 128GB SSD Cruscial MX200 250GB SSD WD 1TB HDD Seasonic M12II Evo 750W 
  hide details  
Reply
Blazer
(8 items)
 
  
CPUMotherboardRAMHard Drive
Intel i7 4790K MSI MPower Z97 Adata XPG 2x8GB DDR3-2600 Crucial M500 120GB SSD 
Hard DriveHard DriveHard DrivePower
Samsung 830 128GB SSD Cruscial MX200 250GB SSD WD 1TB HDD Seasonic M12II Evo 750W 
  hide details  
Reply
post #6 of 7
Generic 1333 CL9 on a 1055T.... yeah, it's going to hold you back. That's why I always recommend minimum DDR3-1600 on a 1055T. At 286-300 bus clock/FSB for 4Ghz, the RAM multiplier x5.33 for 1600Mhz RAM aligns best.
post #7 of 7
Thread Starter 
Yeah I know, but I didn't know that 7 months ago when I ordered it and knew almost nothing about RAM.

For 294 FSB @ 7-8-7 I need 1.65v on the RAM. 290FSB only needs 1.62v.

I saw an old pic of mine, and apparently the stock is 1.62v, and I've had it undervolted all the time because I set it manually
Edited by Devilmaypoop - 6/8/11 at 8:46am
..
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3445MHZ 1.2V/ SB Pentium G620@0.84v ASUS M4A79XTD EVO/ ASUS P8P67 Sapphire 6870/ Club 3D 5770 2x2gb Kingston DDR3 1333mhz @ 1467mhz 7-7-7-17 
Hard DriveOSPower
Samsung Spinpoint F3 1TB Windows 7 Home 64bit Corsair 600W 
  hide details  
Reply
..
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3445MHZ 1.2V/ SB Pentium G620@0.84v ASUS M4A79XTD EVO/ ASUS P8P67 Sapphire 6870/ Club 3D 5770 2x2gb Kingston DDR3 1333mhz @ 1467mhz 7-7-7-17 
Hard DriveOSPower
Samsung Spinpoint F3 1TB Windows 7 Home 64bit Corsair 600W 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Memory
Overclock.net › Forums › Components › Memory › Kingstom 1333mhz 2x2 Kit, can't go above 275 FSB