Overclock.net › Forums › Intel › Intel Motherboards › help OC'ing it 930 + asus p6t + 6gb ram 1333
New Posts  All Forums:Forum Nav:

help OC'ing it 930 + asus p6t + 6gb ram 1333 - Page 4

post #31 of 60
just press the + and - keys when it is highlighed and look at the change in frequeny at the top. 172 for 3.6 and 181 for 3.8.

Gear mentioned in this thread:

post #32 of 60
Thread Starter 
Sean, when I raise my base clock, ram frequency raises along with it. bclk 191 raises ram to about 2280mhz or so. should I reset ram to 1600mhz? I even looked for a value like that, but there was only broken numbers like 1813mhz.
post #33 of 60
make sure the ram frequency is at about 1600. so 1400-1500 is fine. I wouldn't got too far over 1600 though.
post #34 of 60
Thread Starter 
alright, found like 1533mhz or something like that, and set the bclk to 191. so I was testing it, but temperature reached 99ºC on first test with clock to 4009.1mhz, guess I should try 3.8 or something?

anyways, I'll get a new case tomorrow, and im waiting on my second fan for my hyper 212 plus. I should have a cooler case by the week.

what you think?
(btw, i did a cinebench test, the 4.0 OC is a beast lol)
Edited by fael097 - 6/19/11 at 4:01pm
post #35 of 60
definitly drop to 3.8 you don't want temps near that high. If they go over 90 stop the test. Aslo what is your vcore voltage at 4.0? Give ma a screenshot of cpuz at idle and load.
post #36 of 60
Thread Starter 
idle and load, when at 4.0:
post #37 of 60
is the voltage set for offset? also once that is set the voltage to .0750 i think..im going to double check. you dont want over 1.35v for 4ghz
Edited by Sean Webster - 6/19/11 at 6:09pm
post #38 of 60
Thread Starter 
I didn't set it to offset because I didn't find "CPU Voltage Control" in my bios. Just the "CPU Voltage" where I can set the voltage manually, but I didn't touch it, leave it to auto. guess mine is different? let me attach a screenshot


Edited by fael097 - 6/19/11 at 6:30pm
post #39 of 60
thats it lol set it to offset and then it will show another voltage control under it and put that to .075 or so.
post #40 of 60
Thread Starter 
I don't think I can set it to anything else than numbers lol
I tried, but there's no offset option
let me try again
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards

Gear mentioned in this thread:

Overclock.net › Forums › Intel › Intel Motherboards › help OC'ing it 930 + asus p6t + 6gb ram 1333