Hi there guys .
Yeah i see a lot people are all having problems With poor speed ill joining that club with you ,I got one today with out checking before buying how good they were, but all i knew was the high speeds ,But that's not the case here i am having mega problems to try and get the speeds out the drive ,In-fact my older KINGSTON SNV425S26 Is way faster then this drive read 225.62MB/s write 108.16MB/s , Where as the OCZ-AGILITY3 197.81MB/s 145.52MB/s ,From what i no and have now seen around the net ,I see and understand that the speeds i am getting from the OCZ-AGILITY3 are pretty low .I have seen benchmarks where people are getting 400MB/s Read 380MB/s Write all most two times the speed that i am getting . In the bios setup i have that set to boot AHCI and drive is plugged into SATA3 ,I have all so tried in other ports ie SATA ports but to be honest there is no change in speeds there pretty much the same speeds .
Just a side note i have flashed the firmware on the SSD drive to 2.22 ,All so the MOBO i am using with this is Z68X-UD3P-B3 F8 .
Hope some one as the same mobo and driver that can maybe give me some answers ,
Edited by ZipTagsUk - 5/26/12 at 9:59am