Overclock.net › Forums › Cooling › Water Cooling › Robitussin's Refresh (1/2'' ID to 5/8'' OD will it fit 3/4''OD)
New Posts  All Forums:Forum Nav:

Robitussin's Refresh (1/2'' ID to 5/8'' OD will it fit 3/4''OD)

post #1 of 3
Thread Starter 


So I'm getting my GTX590 sometime within the next 2 days and I decided since I haven't cleaned my block thoroughly I may as well do that and change out my tubing to something clear, must keep better watch for nickel corrosion now that EK sucks and everything...

So I'm changing over to some clear/uv blue Feser tubing, and some shiny new compression fittings from Bitspower **Are these gonna work i just noticed they are 5/8'' OD not 3/4 **
I've got a mock up of how I'm gonna redo the loop as well Yellow=Res/Pink=pump/Blue=tube

I'm thinking it will hopefully shorten my length of tubing used to make up for the new block and keep a similar amount of movement through the loop. The res/pump aren't connected but I can't really think of a better solution. I bought a paper towel holder at Walmart and I'm going to try and fit the res and pump onto it some how:
(super cool airduster in background)
So if that all works out I could at least have the pump/res assembly be a bit more modular allowing me to be a bit more flexible with where everything is set up. I'll have some more pics and work incoming just waiting on the packages now

couple pics of before (long tubes i know >.>)
Edited by Robitussin - 6/14/11 at 3:42pm
post #2 of 3
Thread Starter 
reserved
post #3 of 3
Thread Starter 
reserved... again
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Robitussin's Refresh (1/2'' ID to 5/8'' OD will it fit 3/4''OD)