Overclock.net › Forums › Intel › Intel CPUs › Need help w/ i7 2600k @ 4.8ghz stable
New Posts  All Forums:Forum Nav:

Need help w/ i7 2600k @ 4.8ghz stable

post #1 of 17
Thread Starter 
Hello all,

Need some help stabilizing my 2600k @ 4.8ghz. I've posted screenshots of load/idle usage and bios. The problems I am having is that the idle vcore voltage is higher than when cpu is at full load and BIOS OC protection kicks in on almost every startup attempt.

Idle voltage: 1.424
Load voltage: 1.352

Motherboard: Asus P8P67-M PRO
CPU cooler: Corsair H60
RAM: Gskill Sniper 8GB (2x4GB) 1866mhz 9-10-9-24

I ran Intel Burn Test and so far it has only failed on the maximum stress test on the 7th attempt. It did not crash to a blue screen but came up with the message the overclock is unstable. Other stress tests in IBT completed successfully. I did about 20 runs on each stress test btw.

3DMark 11 benchmarks completed successfully also. I've been folding for almost 24 hours and so far, had no problems.

So if anyone has any suggestions on how to work out the bugs with this overclock, it's greatly appreciated.

[ATTACH]215378[/ATTACH][ATTACH]215379[/ATTACH][ATTACH]215380[/ATTACH][ATTACH]215381[/ATTACH][ATTACH]215382[/ATTACH]
Edited by jibesh - 6/15/11 at 1:26am
VH001
(17 items)
 
VH002
(15 items)
 
VH003
(16 items)
 
CPUCPUMotherboardGraphics
Intel Xeon E5-2670 Intel Xeon E5-2670 SuperMicro X9DR7-LN4F Onboard Graphics 
RAMHard DriveHard DriveHard Drive
128GB (16 x 8GB) 1333MHz ECC Registered DDR3 4 x Micron M500 480GB SSD 4 x Hitachi 450GB 10K SAS 8 x Toshiba 5TB 
Hard DriveCoolingCoolingOS
Intel 750 400GB NVME SSD 2 x Dynatron R22 6 x SuperMicro 5K RPM Fans VMWare vSphere 6 
MonitorPowerCaseOther
IPMI SuperMicro 650W PSU SuperMicro CSE-833T-650B Black 3U Rackmount Ser... Intel X520-T2 Dual Port 10GbE Server Adapter 
Other
HP P420 1GB Smart Array Controller 
CPUCPUMotherboardGraphics
Intel Xeon E5-2670 Intel Xeon E5-2670 Intel S2600CP2J Onboard Graphics 
RAMHard DriveHard DriveHard Drive
128GB (16 x 8GB) 1333MHz ECC Registered DDR3 4 x Micron M500 480GB SSD 4 x Hitachi 450GB 10K SAS Intel 750 400GB NVME SSD 
CoolingOSMonitorPower
2 x Intel AUPSRCBTP VMWare vSphere 6 IPMI Intel 750W PSU 
CaseOtherOther
Intel P4216XXMHGR 4U Server Chassis Intel X520-T2 Dual Port 10GbE Server Adapter HP P420 1GB Smart Array Controller 
CPUCPUMotherboardGraphics
Intel Xeon E5-2670 Intel Xeon E5-2670 SuperMicro X9DR3-F Onboard Graphics 
RAMHard DriveHard DriveHard Drive
128GB (16 x 8GB) 1333MHz ECC Registered DDR3 4 x Micron M500 480GB SSD 4 x Hitachi 450GB 10K SAS Intel 750 400GB NVME SSD 
CoolingCoolingOSMonitor
2 x Dynatron R22 3 x SuperMicro 5K RPM Fans VMWare vSphere 6 IPMI 
PowerCaseOtherOther
SuperMicro 563W PSU SuperMicro CSE-825TQ-563LPB 2U Rackmount Server... Intel X520-T2 Dual Port 10GbE Server Adapter HP P420 1GB Smart Array Controller 
  hide details  
Reply
VH001
(17 items)
 
VH002
(15 items)
 
VH003
(16 items)
 
CPUCPUMotherboardGraphics
Intel Xeon E5-2670 Intel Xeon E5-2670 SuperMicro X9DR7-LN4F Onboard Graphics 
RAMHard DriveHard DriveHard Drive
128GB (16 x 8GB) 1333MHz ECC Registered DDR3 4 x Micron M500 480GB SSD 4 x Hitachi 450GB 10K SAS 8 x Toshiba 5TB 
Hard DriveCoolingCoolingOS
Intel 750 400GB NVME SSD 2 x Dynatron R22 6 x SuperMicro 5K RPM Fans VMWare vSphere 6 
MonitorPowerCaseOther
IPMI SuperMicro 650W PSU SuperMicro CSE-833T-650B Black 3U Rackmount Ser... Intel X520-T2 Dual Port 10GbE Server Adapter 
Other
HP P420 1GB Smart Array Controller 
CPUCPUMotherboardGraphics
Intel Xeon E5-2670 Intel Xeon E5-2670 Intel S2600CP2J Onboard Graphics 
RAMHard DriveHard DriveHard Drive
128GB (16 x 8GB) 1333MHz ECC Registered DDR3 4 x Micron M500 480GB SSD 4 x Hitachi 450GB 10K SAS Intel 750 400GB NVME SSD 
CoolingOSMonitorPower
2 x Intel AUPSRCBTP VMWare vSphere 6 IPMI Intel 750W PSU 
CaseOtherOther
Intel P4216XXMHGR 4U Server Chassis Intel X520-T2 Dual Port 10GbE Server Adapter HP P420 1GB Smart Array Controller 
CPUCPUMotherboardGraphics
Intel Xeon E5-2670 Intel Xeon E5-2670 SuperMicro X9DR3-F Onboard Graphics 
RAMHard DriveHard DriveHard Drive
128GB (16 x 8GB) 1333MHz ECC Registered DDR3 4 x Micron M500 480GB SSD 4 x Hitachi 450GB 10K SAS Intel 750 400GB NVME SSD 
CoolingCoolingOSMonitor
2 x Dynatron R22 3 x SuperMicro 5K RPM Fans VMWare vSphere 6 IPMI 
PowerCaseOtherOther
SuperMicro 563W PSU SuperMicro CSE-825TQ-563LPB 2U Rackmount Server... Intel X520-T2 Dual Port 10GbE Server Adapter HP P420 1GB Smart Array Controller 
  hide details  
Reply
post #2 of 17
Looks like a case of vdroop to me, have you enabled load line calibration so that voltage doesn't drop so much? 1.352v on load is low compared to my chip at 4.8ghz, I need 1.4v+

Also I cant see your screen shots for some reason..
    
CPUMotherboardGraphicsRAM
[Intel] i7 2600k | 4.8Ghz HT 24/7 [Gigabyte] P67A-UD7-B3  [AMD] Radeon HD6990  [Samsung] 16GB 30nm 1866mhz 
Hard DriveCoolingOSMonitor
[G Skill] Pheonix Pro 60G SSD - Boot | 2TB Sams... Custom EKWB | XSPC | Swiftec | Primochill | Bit... [Windows7] Professional x64 [Acheiva] Shimian ISP-I 1440p 
KeyboardPowerCaseMouse
[CoolerMaster] Storm TK MX-Brown [Corsair] HX1000 | MDPC Sleeved [Silverstone] Modified Temjin TJ07 [Razer] DeathAdder 
Mouse PadAudioOther
Steelseries QCK [Asus] Xonar DG Sennheiser HD558 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
[Intel] i7 2600k | 4.8Ghz HT 24/7 [Gigabyte] P67A-UD7-B3  [AMD] Radeon HD6990  [Samsung] 16GB 30nm 1866mhz 
Hard DriveCoolingOSMonitor
[G Skill] Pheonix Pro 60G SSD - Boot | 2TB Sams... Custom EKWB | XSPC | Swiftec | Primochill | Bit... [Windows7] Professional x64 [Acheiva] Shimian ISP-I 1440p 
KeyboardPowerCaseMouse
[CoolerMaster] Storm TK MX-Brown [Corsair] HX1000 | MDPC Sleeved [Silverstone] Modified Temjin TJ07 [Razer] DeathAdder 
Mouse PadAudioOther
Steelseries QCK [Asus] Xonar DG Sennheiser HD558 
  hide details  
Reply
post #3 of 17
Thread Starter 
Quote:
Originally Posted by ttoadd.nz;13878289 
Looks like a case of vdroop to me, have you enabled load line calibration so that voltage doesn't drop so much? 1.352v on load is low compared to my chip at 4.8ghz, I need 1.4v+

Also I cant see your screen shots for some reason..

Fixed screenshots.

If I enable LLC, I get stability issues like blue screens so I have it disabled.
VH001
(17 items)
 
VH002
(15 items)
 
VH003
(16 items)
 
CPUCPUMotherboardGraphics
Intel Xeon E5-2670 Intel Xeon E5-2670 SuperMicro X9DR7-LN4F Onboard Graphics 
RAMHard DriveHard DriveHard Drive
128GB (16 x 8GB) 1333MHz ECC Registered DDR3 4 x Micron M500 480GB SSD 4 x Hitachi 450GB 10K SAS 8 x Toshiba 5TB 
Hard DriveCoolingCoolingOS
Intel 750 400GB NVME SSD 2 x Dynatron R22 6 x SuperMicro 5K RPM Fans VMWare vSphere 6 
MonitorPowerCaseOther
IPMI SuperMicro 650W PSU SuperMicro CSE-833T-650B Black 3U Rackmount Ser... Intel X520-T2 Dual Port 10GbE Server Adapter 
Other
HP P420 1GB Smart Array Controller 
CPUCPUMotherboardGraphics
Intel Xeon E5-2670 Intel Xeon E5-2670 Intel S2600CP2J Onboard Graphics 
RAMHard DriveHard DriveHard Drive
128GB (16 x 8GB) 1333MHz ECC Registered DDR3 4 x Micron M500 480GB SSD 4 x Hitachi 450GB 10K SAS Intel 750 400GB NVME SSD 
CoolingOSMonitorPower
2 x Intel AUPSRCBTP VMWare vSphere 6 IPMI Intel 750W PSU 
CaseOtherOther
Intel P4216XXMHGR 4U Server Chassis Intel X520-T2 Dual Port 10GbE Server Adapter HP P420 1GB Smart Array Controller 
CPUCPUMotherboardGraphics
Intel Xeon E5-2670 Intel Xeon E5-2670 SuperMicro X9DR3-F Onboard Graphics 
RAMHard DriveHard DriveHard Drive
128GB (16 x 8GB) 1333MHz ECC Registered DDR3 4 x Micron M500 480GB SSD 4 x Hitachi 450GB 10K SAS Intel 750 400GB NVME SSD 
CoolingCoolingOSMonitor
2 x Dynatron R22 3 x SuperMicro 5K RPM Fans VMWare vSphere 6 IPMI 
PowerCaseOtherOther
SuperMicro 563W PSU SuperMicro CSE-825TQ-563LPB 2U Rackmount Server... Intel X520-T2 Dual Port 10GbE Server Adapter HP P420 1GB Smart Array Controller 
  hide details  
Reply
VH001
(17 items)
 
VH002
(15 items)
 
VH003
(16 items)
 
CPUCPUMotherboardGraphics
Intel Xeon E5-2670 Intel Xeon E5-2670 SuperMicro X9DR7-LN4F Onboard Graphics 
RAMHard DriveHard DriveHard Drive
128GB (16 x 8GB) 1333MHz ECC Registered DDR3 4 x Micron M500 480GB SSD 4 x Hitachi 450GB 10K SAS 8 x Toshiba 5TB 
Hard DriveCoolingCoolingOS
Intel 750 400GB NVME SSD 2 x Dynatron R22 6 x SuperMicro 5K RPM Fans VMWare vSphere 6 
MonitorPowerCaseOther
IPMI SuperMicro 650W PSU SuperMicro CSE-833T-650B Black 3U Rackmount Ser... Intel X520-T2 Dual Port 10GbE Server Adapter 
Other
HP P420 1GB Smart Array Controller 
CPUCPUMotherboardGraphics
Intel Xeon E5-2670 Intel Xeon E5-2670 Intel S2600CP2J Onboard Graphics 
RAMHard DriveHard DriveHard Drive
128GB (16 x 8GB) 1333MHz ECC Registered DDR3 4 x Micron M500 480GB SSD 4 x Hitachi 450GB 10K SAS Intel 750 400GB NVME SSD 
CoolingOSMonitorPower
2 x Intel AUPSRCBTP VMWare vSphere 6 IPMI Intel 750W PSU 
CaseOtherOther
Intel P4216XXMHGR 4U Server Chassis Intel X520-T2 Dual Port 10GbE Server Adapter HP P420 1GB Smart Array Controller 
CPUCPUMotherboardGraphics
Intel Xeon E5-2670 Intel Xeon E5-2670 SuperMicro X9DR3-F Onboard Graphics 
RAMHard DriveHard DriveHard Drive
128GB (16 x 8GB) 1333MHz ECC Registered DDR3 4 x Micron M500 480GB SSD 4 x Hitachi 450GB 10K SAS Intel 750 400GB NVME SSD 
CoolingCoolingOSMonitor
2 x Dynatron R22 3 x SuperMicro 5K RPM Fans VMWare vSphere 6 IPMI 
PowerCaseOtherOther
SuperMicro 563W PSU SuperMicro CSE-825TQ-563LPB 2U Rackmount Server... Intel X520-T2 Dual Port 10GbE Server Adapter HP P420 1GB Smart Array Controller 
  hide details  
Reply
post #4 of 17
running mine at 4.7Ghz, +0.130 vcore, llc lvl 5, and some trhotling disabled. and it runs great.

but on 4.8 no i have no idea, i should try sometime.
Frozen Acid
(22 items)
 
Downclocked
(16 items)
 
 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600k, 5Ghz Asus P8P67 WS Revolution XFX HD 6970 @ 1000/1475 XFX HD 6970 @ 1000/1475 
RAMHard DriveHard DriveHard Drive
Corsair Vengance 8GB DDR3 Crucial M4 256gb OCz Vertex 3 120gb 8TB 
CoolingCoolingCoolingCooling
Ek Suppreme HF Full Nickel EK FC6970v2 EK FC6970v1 XSPC RX360 (x4) 
OSMonitorKeyboardPower
Microsoft Windows 7 Ultimate Dell U2312HM Filco Majestouch 2 Ninja MX red Silverstone Striver 1500W 
CaseMouseAudioAudio
Case Labs M8 + Pedestal Steelseries Sensei Asus Xonar Essence STX Audio Technica ATH-A900 
CPUMotherboardGraphicsRAM
Intel Q9450 Gigabyte GA-EX38-DS4 Ati Radeon X1650 Pro 3x 2G DDR2 
Hard DriveCoolingOSMonitor
WD 500gb Drive (os) Scythe Mugen 2 Rev.B Windows 7 Phillips 32" tv 
KeyboardPowerCaseMouse
G15 V1 mod. Corsair CX500 Corsair 600T Logitech Performance MX 
  hide details  
Reply
Frozen Acid
(22 items)
 
Downclocked
(16 items)
 
 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600k, 5Ghz Asus P8P67 WS Revolution XFX HD 6970 @ 1000/1475 XFX HD 6970 @ 1000/1475 
RAMHard DriveHard DriveHard Drive
Corsair Vengance 8GB DDR3 Crucial M4 256gb OCz Vertex 3 120gb 8TB 
CoolingCoolingCoolingCooling
Ek Suppreme HF Full Nickel EK FC6970v2 EK FC6970v1 XSPC RX360 (x4) 
OSMonitorKeyboardPower
Microsoft Windows 7 Ultimate Dell U2312HM Filco Majestouch 2 Ninja MX red Silverstone Striver 1500W 
CaseMouseAudioAudio
Case Labs M8 + Pedestal Steelseries Sensei Asus Xonar Essence STX Audio Technica ATH-A900 
CPUMotherboardGraphicsRAM
Intel Q9450 Gigabyte GA-EX38-DS4 Ati Radeon X1650 Pro 3x 2G DDR2 
Hard DriveCoolingOSMonitor
WD 500gb Drive (os) Scythe Mugen 2 Rev.B Windows 7 Phillips 32" tv 
KeyboardPowerCaseMouse
G15 V1 mod. Corsair CX500 Corsair 600T Logitech Performance MX 
  hide details  
Reply
post #5 of 17
1.352 loaded might be a little to low for your chip.. Mine needs 1.452v.. I give it 1.460 for absolute stability.

I need to put in +0.110v offset to get 1.452 iirc
Nexus
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 4790K Gigabyte Z87 G1 Sniper M5  2x Zotac 980Ti (Reference Design) Corsair Dominator Platinum 1866Mhz 4x4Gb (16Gb)... 
Hard DriveHard DriveHard DriveHard Drive
Crucial M550 256Gb Corsair Force GT 240Gb Seagate 3TB 2x Samsung Spinpoint F3 1TB 
CoolingOSMonitorKeyboard
Swiftec H220X w/ GT-AP15  Windows 8.1 Pro x64 Samsung 32EH5000 32" HD Direct lit LED TV Ducky Shine 3 [Cherry MX Blue , White LED] 
PowerCaseMouseMouse Pad
Coolermaster V1000 Corsair 350D Logitech G603 Puretrack Talent 
Audio
Logitech Z5500 5.1 Digital Speaker 
  hide details  
Reply
Nexus
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 4790K Gigabyte Z87 G1 Sniper M5  2x Zotac 980Ti (Reference Design) Corsair Dominator Platinum 1866Mhz 4x4Gb (16Gb)... 
Hard DriveHard DriveHard DriveHard Drive
Crucial M550 256Gb Corsair Force GT 240Gb Seagate 3TB 2x Samsung Spinpoint F3 1TB 
CoolingOSMonitorKeyboard
Swiftec H220X w/ GT-AP15  Windows 8.1 Pro x64 Samsung 32EH5000 32" HD Direct lit LED TV Ducky Shine 3 [Cherry MX Blue , White LED] 
PowerCaseMouseMouse Pad
Coolermaster V1000 Corsair 350D Logitech G603 Puretrack Talent 
Audio
Logitech Z5500 5.1 Digital Speaker 
  hide details  
Reply
post #6 of 17
Isn't the ATV option better for these -M boards than the offset?
Prevously I have run my 2500K at 4,5ghz with only adjusting offset to -0.005, and the vcore has been 1,272 according to newest cpu-z.
Some oc guide that I read said that atv is better for these boards than offset.
Now that I quickly tested 4,8ghz, i put atv to 0.60 or something and IBT avx 7gb load voltage was 1,38 and it seemed very stable at that, then the vdroop came and 1,32 boom bsod.
Then I said screw it and returned to 4,5 biggrin.gif
When I get my new cooler, psu and gpu I'll start oc'ing more intensively/"professionally".
Apparently under 1,39-1,4v at 4,8ghz means awesome-ish chip?
And about vdroop, somewhere it said that llc would help. Is this correct at all?

Sent from my HTC Desire using Tapatalk
Butterfly effect
(19 items)
 
Helios
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 3770K Asus Maximus IV GENE-Z Club3D HD 7850 8GB Samsung 30nm 
RAMHard DriveHard DriveOptical Drive
8GB Team Group Crucial BX100 250GB WD30EFRX Samsung SH-B083L 
CoolingOSMonitorKeyboard
Thermalright HR-02 Macho Windows 10 Professional 64bit Benq G2410HD Cherry G80-3000 
PowerCaseMouseAudio
Seasonic 660w XP2 Fractal Design Define R5 Logitech Performance Mouse MX SMSL SD-793ii 
OtherOtherOther
2x Fractal Design GP-14 1x Noctua NF-A14 PWM Kensington Expert Mouse 
CPUMotherboardGraphicsRAM
Intel Pentium G2120 Intel DH77EB Gigabyte 5670 DDR3 1Gb (GV-R567D3-1GI) Kingston 2x4GB 1600Mhz CL9 1.35v 
Hard DriveHard DriveOptical DriveCooling
WD1001FALS Samsung 830 64GB Optiarc AD5280S Noctua NH-U12P 
CoolingCoolingCoolingOS
Arctic Cooling Accelero S1 Rev. 2 Scythe Slip Stream PWM Scythe Gentle Typhoon AP-14 Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
LG 32LH2000 Logitech MK520 Seasonic SS-400FL V2 Lian Li PC-A05NB 
Other
HDHomerun HDHR3/EU 
  hide details  
Reply
Butterfly effect
(19 items)
 
Helios
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 3770K Asus Maximus IV GENE-Z Club3D HD 7850 8GB Samsung 30nm 
RAMHard DriveHard DriveOptical Drive
8GB Team Group Crucial BX100 250GB WD30EFRX Samsung SH-B083L 
CoolingOSMonitorKeyboard
Thermalright HR-02 Macho Windows 10 Professional 64bit Benq G2410HD Cherry G80-3000 
PowerCaseMouseAudio
Seasonic 660w XP2 Fractal Design Define R5 Logitech Performance Mouse MX SMSL SD-793ii 
OtherOtherOther
2x Fractal Design GP-14 1x Noctua NF-A14 PWM Kensington Expert Mouse 
CPUMotherboardGraphicsRAM
Intel Pentium G2120 Intel DH77EB Gigabyte 5670 DDR3 1Gb (GV-R567D3-1GI) Kingston 2x4GB 1600Mhz CL9 1.35v 
Hard DriveHard DriveOptical DriveCooling
WD1001FALS Samsung 830 64GB Optiarc AD5280S Noctua NH-U12P 
CoolingCoolingCoolingOS
Arctic Cooling Accelero S1 Rev. 2 Scythe Slip Stream PWM Scythe Gentle Typhoon AP-14 Windows 7 Ultimate 64bit 
MonitorKeyboardPowerCase
LG 32LH2000 Logitech MK520 Seasonic SS-400FL V2 Lian Li PC-A05NB 
Other
HDHomerun HDHR3/EU 
  hide details  
Reply
post #7 of 17
I am trying to get to a 4.8 as well, I am having problems finding the right voltage, and all of the options for my mobo are starting to confuse me. 1.4 seems to be the place where most people are finding the sweet stop. I would like to see other's input on this.

Also on a somewhat related note: There's an option that allows you to run at lower frequencies, like 1.6 while the PC is idle, and then kicks up to the 4.8 you have set. Are there drawbacks to this? How do I enable it? I seem to have done it by mistake when I OCed to 4.2 when I started testing but now I can't get it back that I'm at 4.5

Thanks
post #8 of 17
Yep, that's a common case of VDroop. I would also like to know about that 1.6GHz thing. Because it's the idle voltage that's killing my 4.8GHz overclock.
    
CPUMotherboardGraphicsRAM
i7 3770k Gigabyte Z77-UD5H-WB Golden GTX 670 Windforce 3X 2 x 4GB GSkill RipJawsX 
Hard DriveCoolingOSMonitor
OCZ Vertex 4 64GB- WD Caviar Black 1TB Noctua NH-D14 Windows 7 Dell U2311H IPS 
KeyboardPowerCaseMouse
xArmor iOne U9BL MX Blues Seasonic x750 LIAN LI PC-T60B Logitech G500 
Audio
Modded JVC HA-RX900 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 3770k Gigabyte Z77-UD5H-WB Golden GTX 670 Windforce 3X 2 x 4GB GSkill RipJawsX 
Hard DriveCoolingOSMonitor
OCZ Vertex 4 64GB- WD Caviar Black 1TB Noctua NH-D14 Windows 7 Dell U2311H IPS 
KeyboardPowerCaseMouse
xArmor iOne U9BL MX Blues Seasonic x750 LIAN LI PC-T60B Logitech G500 
Audio
Modded JVC HA-RX900 
  hide details  
Reply
post #9 of 17
Quote:
Originally Posted by snelan;13883782 
Yep, that's a common case of VDroop. I would also like to know about that 1.6GHz thing. Because it's the idle voltage that's killing my 4.8GHz overclock.

You can use offset. for idle voltages.
I use "-" 0.005 offset with LLC at ultra high. Everything else in default. For 4.6 never go beyond 1.35 and idle at 1.000
post #10 of 17
Perhaps this is happening to you? I've got the same board and am looking to getting a H60, too. If it's this problem I'll just get the Kühler 620. It seems to not have this issue. See here.
Carronade
(12 items)
 
Citadel
(9 items)
 
 
CPUMotherboardGraphicsRAM
Intel® Core™ i7-7700K ASUS ROG Strix Z270I NVIDIA GeForce GTX 1080Ti 32GB Corsair Vengeance 3200Mhz 
Hard DriveCoolingOSMonitor
Samsung 960 PRO NVMe M.2 512GB Cryorig C7 Compact Windows 10 Enterprise (x64) ASUS VG248QE 
KeyboardPowerCaseMouse
Logitech G510 Corsair SF600 SFX 80+ Dr. Ząber Sentry Razer Chroma 
CPUMotherboardGraphicsRAM
Dual Intel® Xeon® Processor X5650 ProLiant DL360 G7 ATI ES1000 56GB DDR3 1333Mhz Registered ECC 
Hard DriveOSPowerOther
4x Samsung 850 Pro 128GB, RAID5 ESXi 6.0 U2 - HPE Custom Image 2x HPE Redundant 460W PSU Smart Array P410i - 512MB BBWC 
  hide details  
Reply
Carronade
(12 items)
 
Citadel
(9 items)
 
 
CPUMotherboardGraphicsRAM
Intel® Core™ i7-7700K ASUS ROG Strix Z270I NVIDIA GeForce GTX 1080Ti 32GB Corsair Vengeance 3200Mhz 
Hard DriveCoolingOSMonitor
Samsung 960 PRO NVMe M.2 512GB Cryorig C7 Compact Windows 10 Enterprise (x64) ASUS VG248QE 
KeyboardPowerCaseMouse
Logitech G510 Corsair SF600 SFX 80+ Dr. Ząber Sentry Razer Chroma 
CPUMotherboardGraphicsRAM
Dual Intel® Xeon® Processor X5650 ProLiant DL360 G7 ATI ES1000 56GB DDR3 1333Mhz Registered ECC 
Hard DriveOSPowerOther
4x Samsung 850 Pro 128GB, RAID5 ESXi 6.0 U2 - HPE Custom Image 2x HPE Redundant 460W PSU Smart Array P410i - 512MB BBWC 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Need help w/ i7 2600k @ 4.8ghz stable