Overclock.net › Forums › Cooling › Water Cooling › Water everywhere.. :(
New Posts  All Forums:Forum Nav:

Water everywhere.. :( - Page 8

post #71 of 205
Heat could cause tubing to expand over time... If you don't want leaks you must use clamps. There is not one plummer that would ever truste pipe/tubing with out glue or clamps ect... Why anyone using water to cool pc and not use clamp is asking for trouble.

Before I ever read this. I already plan on double clamping ever fitting and adding a tee with a drain plug for easy draining. So I can do it every month or 2. Double clamping might be over kill but I know it will not leak .

I have read running 2 BIO growth killers like kill coil AND anti-fungal will cause corroasion and that you want to run one or the other?

I feel sorry for the op and hope everything works out.
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 4.5GHZ 1.33Vcore Asus P8P67 Deluxe B3 GIGABYTE 570 GTX 13I Rev2 G Skill 1600 2x2 set 
Hard DriveCoolingOSMonitor
kingston hyperx 3k  xspc rs 240 kit windows 7 64bit 22" viewsomic hd led 
Power
Seasonic x750 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 4.5GHZ 1.33Vcore Asus P8P67 Deluxe B3 GIGABYTE 570 GTX 13I Rev2 G Skill 1600 2x2 set 
Hard DriveCoolingOSMonitor
kingston hyperx 3k  xspc rs 240 kit windows 7 64bit 22" viewsomic hd led 
Power
Seasonic x750 
  hide details  
Reply
post #72 of 205
Thread Starter 
I used Dead-Water PC Coolant Biocide(1 drop per liter) and put the kill-coil in the reservoir. I never came upon a thread or a recommendation against using more than one method. I highly doubt that caused it but maybe.

So using distilled water mixed with antifreeze is safe?

Here are pics of the block











This is the XSPC block, the EK water blocks for the motherboard are fine.
Big Folder
(11 items)
 
  
CPUMotherboardGraphicsRAM
4790k @ 4.4 z97-ar MSI GeForce GTX 980 Ti Lightning Kingston HyperX Fury1866Mhz Clk 10 
Hard DriveHard DriveCoolingOS
WD1000 Green Seagate SSD Hyper 212+ Push/Pull with fan shroud Ubuntu 12.04.3 LTS 
MonitorPowerCase
Acer 23  TR2 RX 850W Switch 810 
  hide details  
Reply
Big Folder
(11 items)
 
  
CPUMotherboardGraphicsRAM
4790k @ 4.4 z97-ar MSI GeForce GTX 980 Ti Lightning Kingston HyperX Fury1866Mhz Clk 10 
Hard DriveHard DriveCoolingOS
WD1000 Green Seagate SSD Hyper 212+ Push/Pull with fan shroud Ubuntu 12.04.3 LTS 
MonitorPowerCase
Acer 23  TR2 RX 850W Switch 810 
  hide details  
Reply
post #73 of 205
what brand are this barbs ?,i apologize if you already answer this
P.S. i have been using distilled/PT Nuke for long time and recently switched to silver but after seeing this i just ordered Feser Base - Corrosion Blocker 50 mL..i'm not taking any chances ,i have no idea where this corrosion is coming from,7$ wont brake the bank and i will sleep better
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
post #74 of 205
Thread Starter 
6x Danger Den G 1/4" High Flow Thread Barb - 1/2" ID

and

6x 1/2" ID XSPC RASA kit barbs.

I do see some green/yellowish crap at the bottom of the blue biocidal bottle. o.O
Big Folder
(11 items)
 
  
CPUMotherboardGraphicsRAM
4790k @ 4.4 z97-ar MSI GeForce GTX 980 Ti Lightning Kingston HyperX Fury1866Mhz Clk 10 
Hard DriveHard DriveCoolingOS
WD1000 Green Seagate SSD Hyper 212+ Push/Pull with fan shroud Ubuntu 12.04.3 LTS 
MonitorPowerCase
Acer 23  TR2 RX 850W Switch 810 
  hide details  
Reply
Big Folder
(11 items)
 
  
CPUMotherboardGraphicsRAM
4790k @ 4.4 z97-ar MSI GeForce GTX 980 Ti Lightning Kingston HyperX Fury1866Mhz Clk 10 
Hard DriveHard DriveCoolingOS
WD1000 Green Seagate SSD Hyper 212+ Push/Pull with fan shroud Ubuntu 12.04.3 LTS 
MonitorPowerCase
Acer 23  TR2 RX 850W Switch 810 
  hide details  
Reply
post #75 of 205
Oxidation on the CPU block is normal, it can be cleaned with an acid. Should not hurt performance too much. Looks like their is a bit of damage done to the block, but I dont see too much of an issue. A glycol based coolant would probably slow down the issue, but not prevent it. Once the black gunk appears on the block it will always come back; there might be some products that might help out with the issue.

I believe that 99% iso alcohol does in fact clean flux (stuff found in PA).

Tubing can become hard and or brittle over time. That may cause the tubing to slip off the barb. Since your CPU is at load 24/7, I would not keep your tubing past tear down.

Using antifreeze is never safe. It's highly toxic and may damage some plastics. Yes it might slow down the what has occured, but it will not prevent it.

That barb does look bad, I wonder if the plating failed and or it is Alu.
Edited by Matari - 6/15/11 at 11:12pm
post #76 of 205
man.. i hope all your components ok ,i know i would be sooo pizzz..off,that one barb looks
really bad and the other thing is your tubing,just puzzling
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
post #77 of 205
I didn't follow the whole thread, but don't test when you get back from work. I would wait at least 2 days and I recommend almost 3 before you try your stuff. I'm sure at least someone will work.

My wife dropped her cellphone in the toilet and it worked fine once all the water inside dried up. I know it might not be the same, but it might work out.
SC2 Phantom
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 2500k @ 4.5Ghz  Asus P8P67 Pro Saphire 7950 3GB 8GB G.SKILL Ripjaws X Series 
Hard DriveOptical DriveOSMonitor
Temp slow hdd None Win7 Pro 64bit Asus 24 VE248H  
KeyboardPowerCaseMouse
Alien XFX 850 Silver 80 Plus NZXT Phantom Black Razer Darthbender 
Mouse Pad
Thermaltake LED 
  hide details  
Reply
SC2 Phantom
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 2500k @ 4.5Ghz  Asus P8P67 Pro Saphire 7950 3GB 8GB G.SKILL Ripjaws X Series 
Hard DriveOptical DriveOSMonitor
Temp slow hdd None Win7 Pro 64bit Asus 24 VE248H  
KeyboardPowerCaseMouse
Alien XFX 850 Silver 80 Plus NZXT Phantom Black Razer Darthbender 
Mouse Pad
Thermaltake LED 
  hide details  
Reply
post #78 of 205
Thread Starter 
I have it sitting in 10lbs of rice right now.

The discoloring in the biocidal, is that normal? Is that to blame? I will contact FrozenCPU if that's the case.

Big Folder
(11 items)
 
  
CPUMotherboardGraphicsRAM
4790k @ 4.4 z97-ar MSI GeForce GTX 980 Ti Lightning Kingston HyperX Fury1866Mhz Clk 10 
Hard DriveHard DriveCoolingOS
WD1000 Green Seagate SSD Hyper 212+ Push/Pull with fan shroud Ubuntu 12.04.3 LTS 
MonitorPowerCase
Acer 23  TR2 RX 850W Switch 810 
  hide details  
Reply
Big Folder
(11 items)
 
  
CPUMotherboardGraphicsRAM
4790k @ 4.4 z97-ar MSI GeForce GTX 980 Ti Lightning Kingston HyperX Fury1866Mhz Clk 10 
Hard DriveHard DriveCoolingOS
WD1000 Green Seagate SSD Hyper 212+ Push/Pull with fan shroud Ubuntu 12.04.3 LTS 
MonitorPowerCase
Acer 23  TR2 RX 850W Switch 810 
  hide details  
Reply
post #79 of 205
There definitely was something off. Perhaps it was that biocide that messed it up. I'd contact frozencpu about it if that is where you bought it from.

For future reference, all you need is a killcoil, no need for anything else.
Ryzen Build
(14 items)
 
Fiance's Rig
(12 items)
 
 
CPUMotherboardGraphicsRAM
AMD Ryzen 5 1600 @ 3.8ghz ASUS ROG Strix B350-F ASUS ROG Strix RX 580 8GB @ 1480mhz Team T-Force Night Hawk RGB 2x8GB (coming soon) 
Hard DriveHard DriveCoolingOS
SanDisk X400 512GB (custom enclosure) WD Blue 1TB | Raid 1 Deepcool Captain 240 RGB Windows 10 Pro 
MonitorKeyboardPowerCase
ViewSonic XG2701 Turbot Mechanical Keyboard EVGA SuperNova P2 650w NZXT S340 Elite 
MouseMouse Pad
Razer Deathadder Chroma Glorious PC Gaming Race Pad 
CPUMotherboardGraphicsRAM
Intel Core i5 2500K @ 4.6ghz ASRock Z68 Extreme3 Gen3 MSI HD 7850 2GB @ 1ghz Mushkin Ridgeline Series @ 1600mhz 
Hard DriveHard DriveCoolingOS
Intel 520 Series Western Digital Caviar Black Cryorig H7 Quad Lumi W/ Xigmatek Purple LED Windows 10 Pro 
MonitorPowerCaseAudio
ViewSonic VX2370SMH-LED Rosewill Capstone 550w BitFenix Neos Window Asus Xonar DG 
  hide details  
Reply
Ryzen Build
(14 items)
 
Fiance's Rig
(12 items)
 
 
CPUMotherboardGraphicsRAM
AMD Ryzen 5 1600 @ 3.8ghz ASUS ROG Strix B350-F ASUS ROG Strix RX 580 8GB @ 1480mhz Team T-Force Night Hawk RGB 2x8GB (coming soon) 
Hard DriveHard DriveCoolingOS
SanDisk X400 512GB (custom enclosure) WD Blue 1TB | Raid 1 Deepcool Captain 240 RGB Windows 10 Pro 
MonitorKeyboardPowerCase
ViewSonic XG2701 Turbot Mechanical Keyboard EVGA SuperNova P2 650w NZXT S340 Elite 
MouseMouse Pad
Razer Deathadder Chroma Glorious PC Gaming Race Pad 
CPUMotherboardGraphicsRAM
Intel Core i5 2500K @ 4.6ghz ASRock Z68 Extreme3 Gen3 MSI HD 7850 2GB @ 1ghz Mushkin Ridgeline Series @ 1600mhz 
Hard DriveHard DriveCoolingOS
Intel 520 Series Western Digital Caviar Black Cryorig H7 Quad Lumi W/ Xigmatek Purple LED Windows 10 Pro 
MonitorPowerCaseAudio
ViewSonic VX2370SMH-LED Rosewill Capstone 550w BitFenix Neos Window Asus Xonar DG 
  hide details  
Reply
post #80 of 205
Thread Starter 
Quote:
Originally Posted by Matari View Post
Oxidation on the CPU block is normal, it can be cleaned with an acid. Should not hurt performance too much. Looks like their is a bit of damage done to the block, but I dont see too much of an issue. A glycol based coolant would probably slow down the issue, but not prevent it. Once the black gunk appears on the block it will always come back; there might be some products that might help out with the issue.

I believe that 99% iso alcohol does in fact clean flux (stuff found in PA).

Tubing can become hard and or brittle over time. That may cause the tubing to slip off the barb. Since your CPU is at load 24/7, I would not keep your tubing past tear down.

Using antifreeze is never safe. It's highly toxic and may damage some plastics. Yes it might slow down the what has occured, but it will not prevent it.

That barb does look bad, I wonder if the plating failed and or it is Alu.

I managed to easily scrape off the corrosion off the barb. It was just a thin layer on the surface.

I may pick up an EK CPU block though not sure I want to use this one anymore.
Big Folder
(11 items)
 
  
CPUMotherboardGraphicsRAM
4790k @ 4.4 z97-ar MSI GeForce GTX 980 Ti Lightning Kingston HyperX Fury1866Mhz Clk 10 
Hard DriveHard DriveCoolingOS
WD1000 Green Seagate SSD Hyper 212+ Push/Pull with fan shroud Ubuntu 12.04.3 LTS 
MonitorPowerCase
Acer 23  TR2 RX 850W Switch 810 
  hide details  
Reply
Big Folder
(11 items)
 
  
CPUMotherboardGraphicsRAM
4790k @ 4.4 z97-ar MSI GeForce GTX 980 Ti Lightning Kingston HyperX Fury1866Mhz Clk 10 
Hard DriveHard DriveCoolingOS
WD1000 Green Seagate SSD Hyper 212+ Push/Pull with fan shroud Ubuntu 12.04.3 LTS 
MonitorPowerCase
Acer 23  TR2 RX 850W Switch 810 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Water everywhere.. :(