Overclock.net › Forums › Cooling › Water Cooling › Need T for rasa.
New Posts  All Forums:Forum Nav:

Need T for rasa.

post #1 of 2
Thread Starter 
Very shortly after I installed My rasa, I realized I had a problem. I had no way to drain it. I didn't have a fill or drain line and now my water has begun to take on a faint green hue even with a kill coil. So I need to figure out a way to drain and flush and add a drain line for later maintenance.

Does anyone know where I could purchase one, looked around but couldn't really find what I needed. Size needed for for hose 7/16" ID x 5/8" OD
post #2 of 2
Well, for a couple dollars you can get a 1/2" nylon T-fitting at a hardware store and then you'll need a barb-style plug fitting for the drain line. Otherwise you can buy a 3-port fitting and either do the same thing or just close one side up with a stop fitting.
Edited by t-ramp - 6/16/11 at 7:13am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Need T for rasa.