Overclock.net › Forums › Cooling › Water Cooling › Best anti-growth solution?
New Posts  All Forums:Forum Nav:

Best anti-growth solution? - Page 3

Poll Results: What is the best anti-growth solution?

 
  • 23% (11)
    PT Nuke
  • 45% (21)
    Silver coil
  • 19% (9)
    PT Nuke + silver coil
  • 10% (5)
    Other
46 Total Votes  
post #21 of 22
from what I have read and heard it is not the dyes that gunk but the additives with the coolants, using pure distilled or deionised and pure dye should not gunk up and if it does it is usually either flux from the rad or plasticiser from the tubing that has been dyed.
As for stopping growth I have used the same loop and same water since feb 2010 with a silver kill coil and have not had any growth
post #22 of 22
Thread Starter 
Hmmmmm if that is the case I might consider adding some blue dye to my loop.......

I have a blue LED in my XSPC res/pump so once I fill up the loop and the water appears blue enough with the LED I'll pass
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Best anti-growth solution?