Yeah - that guide is where I read about disabling, and my understanding was that if it was for stability.
I hadn't properly read the bit about SVID though, what the guide shows is more or less in line with what I see in my bios.
Excuse my ignorance, but how exactly does SVID work? I was under the impression that I could run 4.0-4.3 with stock voltages.
Thanks for all the help!
Edit: Ok, after some googling, I've found that VID is the "stock" voltage manufactured into the chip, which would mean the chip was running at 1.25 as I'd set it, and the 1.35v I saw was a normal VID reading.Edited by SafeKlok - 6/28/11 at 9:29am