New Posts  All Forums:Forum Nav:

Joining two routers - Page 2

post #11 of 12
Quote:
Originally Posted by foX2delta777 View Post
Okay so before everyone shoots for creating a another thread (old one here) I feel to explain it better I needed to.

Okay so I'll explain; (with a picture)

PC¡¯s are connected to router 3 via cable and wireless and connect to either router 1 or 2 via changing network adapter settings to;

For Router 1
IP: 192.168.2.104 Sub: 255.255.255.0 Gateway: 192.168.2.1

For Router 2
IP: 192.168.1.111 Sub: 255.255.255.0 Gateway: 192.168.1.254 or using DHCP

Problem is if you are connected to router 1 you can¡¯t see PC¡¯s connected to router 2 and visa versa

I only have access to router 3 (linksys wrt54gl running ddwrt)

These are the scripts I use to quickly switch between Router 1 or 2 and dhcp on the connected PC¡¯s
For DHCP
netsh interface ip set address "Local Area Connection" dhcp
netsh interface ip set dns "Local Area Connection" dhcp
For Router 1
netsh interface ip set address name="Local Area Connection" static 192.168.2.104 255.255.255.0 192.168.2.1 1
netsh interface ip set dns "Local Area Connection" static 192.168.2.1
netsh interface ip add dns "Local Area Connection" 8.8.8.8 2
For Router 2
netsh interface ip set address name="Local Area Connection" static 192.168.1.111 255.255.255.0 192.168.1.254 1
netsh interface ip set dns "Local Area Connection" static 192.168.1.254
netsh interface ip add dns "Local Area Connection" 8.8.8.8 2

dont tell me thats helkoms stuff you playing with lol

This is wrong
IP: 192.168.2.104 Sub: 255.255.255.0<-

Your hosts on that ip will be between
192.168.2.97 -> 192.168.2.126
Broadcast 192.168.2.127


Here is your subnets
1. 192.168.2.33->192.168.2.62
2. 192.168.2.65->192.168.2.94
3. 192.168.2.97->192.168.2.126
Edited by Spooony - 6/17/11 at 6:54pm
post #12 of 12
Why can't you control the settings on your own routers???
    
CPUMotherboardGraphicsRAM
Pentium III @ 533MHz QDI Advance 10F lol 255MB 
Hard DriveOSPower
IDE TC Hamster wheel 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Pentium III @ 533MHz QDI Advance 10F lol 255MB 
Hard DriveOSPower
IDE TC Hamster wheel 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Networking & Security