Overclock.net › Forums › Cooling › Water Cooling › [BUILD LOG] Black and Blue 800D - Finished
New Posts  All Forums:Forum Nav:

[BUILD LOG] Black and Blue 800D - Finished - Page 2

post #11 of 96
Thread Starter 
Sleeving Idea:

I'll be sleeving the 24pin, 6pin and 4 pin cables to my motherboard/graphics card. These are color schemes I'm planning on. I've never sleeved before, so this will be a fun project:

(of course these represent one "portion" of the cables, the other 12 wires on the 24pin will be the same as shown, as well as the 4 and 6pin schemes).

All the plastic connectors on the end will be black. I am modeling the cable scheme after the reservoir, with the black ends and blue middle/insides. Hopefully my tubing will come out like that as well, UV blue with black fittings. I wish I had a more aesthetically pleasing motherboard, but I can't justify getting a new one just for looks.

24 pin (decided to change this to 2 black - 3 blue - 2 black - 3 blue -2 black)
Screenshot2011-06-20at65452PM.png

6 pin:
Screenshot2011-06-20at70520PM.png

4 pin:
Screenshot2011-06-20at70755PM.png

Real art work here!

I need x2 4pin and x2 6pin and each pair connects right next to the other (two 4 pins are right by each other, as well as the two 6 pins), so I will throw them each together as shown. That's the best I could come up with with the scheme of black on the outsides with 2 blues in the middle, separated by black.

I'll be thinking of some other ideas tomorrow while I'm at worked and day dreaming (staring at the monitor basically).

Once I sleeve those 3 things, I will use whatever sleeving I have left over and use it on all the wires I can find that need sleeving haha.
Edited by Tomiger - 6/29/11 at 8:33pm
 
Mineral Oil PC
(7 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4790K Devil's Canyon 4.0GHz ASUS Sabertooth Z97 Mark S (White) Zotac GTX 760 Avexir Raiden 16GB DDR3 
Hard DriveCoolingCoolingCooling
OCZ Trion 240GB XSPC Raystorm Pro (white) XSPC EX 240 (white) XSPC EX 360 (white) 
CoolingCoolingCoolingCooling
Swiftech MCP655 Monsoon Dual Bay Reservoir Monsoon Modular Tube Reservoir Monsoon Stand Alone Pump Top/Cover 
CoolingPower
EK GTX 970 Water Block Corsair AX760i 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600K Sandy Bridge 3.4 GHz Gigabyte GA-P67A-UD4-B3 GTX 285 GTX 285 
RAMHard DriveHard DriveCooling
Corsair Vengeance 16GB Western Digital 1TB Western Digital 250GB EK-Supremacy Clean CSQ - Nickel 
CoolingCoolingCoolingCooling
XSPC RX 360 XSPC EX 360 (cross flow) FrozenQ T-virus Reservoir EK Waterblock GTX 285 
Cooling
Swiftech MCP655 
  hide details  
Reply
 
Mineral Oil PC
(7 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4790K Devil's Canyon 4.0GHz ASUS Sabertooth Z97 Mark S (White) Zotac GTX 760 Avexir Raiden 16GB DDR3 
Hard DriveCoolingCoolingCooling
OCZ Trion 240GB XSPC Raystorm Pro (white) XSPC EX 240 (white) XSPC EX 360 (white) 
CoolingCoolingCoolingCooling
Swiftech MCP655 Monsoon Dual Bay Reservoir Monsoon Modular Tube Reservoir Monsoon Stand Alone Pump Top/Cover 
CoolingPower
EK GTX 970 Water Block Corsair AX760i 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600K Sandy Bridge 3.4 GHz Gigabyte GA-P67A-UD4-B3 GTX 285 GTX 285 
RAMHard DriveHard DriveCooling
Corsair Vengeance 16GB Western Digital 1TB Western Digital 250GB EK-Supremacy Clean CSQ - Nickel 
CoolingCoolingCoolingCooling
XSPC RX 360 XSPC EX 360 (cross flow) FrozenQ T-virus Reservoir EK Waterblock GTX 285 
Cooling
Swiftech MCP655 
  hide details  
Reply
post #12 of 96
That would look great!, ive heard of some people sleeving their 24pin so that 2 cables are in one sleeve if that makes sense?

This really looks like its coming along well.

Keep us posted
Main rig
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel I5-3570K Asus P8Z77-V EVGA GTX 680 2GB 8GB Corsair Dominator 1600MHZ 
Hard DriveCoolingOSMonitor
Western digital caviar black 1TB EK Supreme HF copper, pmp400 + XSPC clear top,... Windows 7 64bit dell 23" LCD 
KeyboardPowerCaseMouse
Corsair K90 Corsair HX-850W Corsair 800D Logitech G500s 
Mouse PadAudio
Steel series QCK Logitech G35 
  hide details  
Reply
Main rig
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel I5-3570K Asus P8Z77-V EVGA GTX 680 2GB 8GB Corsair Dominator 1600MHZ 
Hard DriveCoolingOSMonitor
Western digital caviar black 1TB EK Supreme HF copper, pmp400 + XSPC clear top,... Windows 7 64bit dell 23" LCD 
KeyboardPowerCaseMouse
Corsair K90 Corsair HX-850W Corsair 800D Logitech G500s 
Mouse PadAudio
Steel series QCK Logitech G35 
  hide details  
Reply
post #13 of 96
Thread Starter 
Alright yesterday I prepared myself for the 800d that was coming in the mail. I took apart my CM690 II rig:



Today I first received the electric blue paracord and heat shrink from FTW PC (that was fast); now it's time for me to learn how to sleeve haha:



Today after work/class, I emptied my loop. This was my first water cooling setup and the first time I've drained a loop. I detached the Rasa block from the motherboard and held it over a pitcher as I took off a compression fitting and the hose. I then blew into the hose to get all the water out. I haven't changed the water in this loop since I put it together almost a year ago. It was nice to see relatively clear water without any obvious signs of something wrong:








Then I proceded to clean the block by letting it soak in 10% white vinegar and 90% distilled water for a little while. I then scrubbed any gunk off with a toothbrush. This is what I'm looking at now:



In the middle of all of this, the 800D arrived. It's BIG.



Didn't take any pictures of the actual case, since nothing new has been added to it.

Now since I had some spare compression fittings now, I decided to see if two could fit side by side on the FrozenQ reservoir:



As you can see, two Fesser compression fittings (for 1/2" x 3/4" tubing) will not fit like this. I'll have to get some 45-angle adapters.

That's it for now; I think I have some random stuff coming in tomorrow. In the meantime, I'll be working on sleeving and painting the compression fittings.
Edited by Tomiger - 6/23/11 at 8:43pm
 
Mineral Oil PC
(7 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4790K Devil's Canyon 4.0GHz ASUS Sabertooth Z97 Mark S (White) Zotac GTX 760 Avexir Raiden 16GB DDR3 
Hard DriveCoolingCoolingCooling
OCZ Trion 240GB XSPC Raystorm Pro (white) XSPC EX 240 (white) XSPC EX 360 (white) 
CoolingCoolingCoolingCooling
Swiftech MCP655 Monsoon Dual Bay Reservoir Monsoon Modular Tube Reservoir Monsoon Stand Alone Pump Top/Cover 
CoolingPower
EK GTX 970 Water Block Corsair AX760i 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600K Sandy Bridge 3.4 GHz Gigabyte GA-P67A-UD4-B3 GTX 285 GTX 285 
RAMHard DriveHard DriveCooling
Corsair Vengeance 16GB Western Digital 1TB Western Digital 250GB EK-Supremacy Clean CSQ - Nickel 
CoolingCoolingCoolingCooling
XSPC RX 360 XSPC EX 360 (cross flow) FrozenQ T-virus Reservoir EK Waterblock GTX 285 
Cooling
Swiftech MCP655 
  hide details  
Reply
 
Mineral Oil PC
(7 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4790K Devil's Canyon 4.0GHz ASUS Sabertooth Z97 Mark S (White) Zotac GTX 760 Avexir Raiden 16GB DDR3 
Hard DriveCoolingCoolingCooling
OCZ Trion 240GB XSPC Raystorm Pro (white) XSPC EX 240 (white) XSPC EX 360 (white) 
CoolingCoolingCoolingCooling
Swiftech MCP655 Monsoon Dual Bay Reservoir Monsoon Modular Tube Reservoir Monsoon Stand Alone Pump Top/Cover 
CoolingPower
EK GTX 970 Water Block Corsair AX760i 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600K Sandy Bridge 3.4 GHz Gigabyte GA-P67A-UD4-B3 GTX 285 GTX 285 
RAMHard DriveHard DriveCooling
Corsair Vengeance 16GB Western Digital 1TB Western Digital 250GB EK-Supremacy Clean CSQ - Nickel 
CoolingCoolingCoolingCooling
XSPC RX 360 XSPC EX 360 (cross flow) FrozenQ T-virus Reservoir EK Waterblock GTX 285 
Cooling
Swiftech MCP655 
  hide details  
Reply
post #14 of 96
coming along very nicely.

May i suggest you use the fill port as an inlet?

When i get round to doing mine, ill just run the rad outlet into the fill port of the reservoir... i imagine it would look a lot cleaner
Main rig
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel I5-3570K Asus P8Z77-V EVGA GTX 680 2GB 8GB Corsair Dominator 1600MHZ 
Hard DriveCoolingOSMonitor
Western digital caviar black 1TB EK Supreme HF copper, pmp400 + XSPC clear top,... Windows 7 64bit dell 23" LCD 
KeyboardPowerCaseMouse
Corsair K90 Corsair HX-850W Corsair 800D Logitech G500s 
Mouse PadAudio
Steel series QCK Logitech G35 
  hide details  
Reply
Main rig
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel I5-3570K Asus P8Z77-V EVGA GTX 680 2GB 8GB Corsair Dominator 1600MHZ 
Hard DriveCoolingOSMonitor
Western digital caviar black 1TB EK Supreme HF copper, pmp400 + XSPC clear top,... Windows 7 64bit dell 23" LCD 
KeyboardPowerCaseMouse
Corsair K90 Corsair HX-850W Corsair 800D Logitech G500s 
Mouse PadAudio
Steel series QCK Logitech G35 
  hide details  
Reply
post #15 of 96
Thread Starter 
Yeah I'll look at it and see if that'll work out; still haven't found a definite spot to put the resevoir inside the case yet, but using the fill port as an inlet would save me a few bucks, but then I dunno how I'd go about filling the loop?

Also, let me know if my CPU block looks clean enough or if there's something else I should do to get it cleaner.

EDIT: Soaking it in some hot sauce now; saw this and decided to give it a try, seems to get rid of the same issue I have: http://www.overclock.net/water-cooli...oxidation.html
Edited by Tomiger - 6/22/11 at 7:37pm
 
Mineral Oil PC
(7 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4790K Devil's Canyon 4.0GHz ASUS Sabertooth Z97 Mark S (White) Zotac GTX 760 Avexir Raiden 16GB DDR3 
Hard DriveCoolingCoolingCooling
OCZ Trion 240GB XSPC Raystorm Pro (white) XSPC EX 240 (white) XSPC EX 360 (white) 
CoolingCoolingCoolingCooling
Swiftech MCP655 Monsoon Dual Bay Reservoir Monsoon Modular Tube Reservoir Monsoon Stand Alone Pump Top/Cover 
CoolingPower
EK GTX 970 Water Block Corsair AX760i 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600K Sandy Bridge 3.4 GHz Gigabyte GA-P67A-UD4-B3 GTX 285 GTX 285 
RAMHard DriveHard DriveCooling
Corsair Vengeance 16GB Western Digital 1TB Western Digital 250GB EK-Supremacy Clean CSQ - Nickel 
CoolingCoolingCoolingCooling
XSPC RX 360 XSPC EX 360 (cross flow) FrozenQ T-virus Reservoir EK Waterblock GTX 285 
Cooling
Swiftech MCP655 
  hide details  
Reply
 
Mineral Oil PC
(7 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4790K Devil's Canyon 4.0GHz ASUS Sabertooth Z97 Mark S (White) Zotac GTX 760 Avexir Raiden 16GB DDR3 
Hard DriveCoolingCoolingCooling
OCZ Trion 240GB XSPC Raystorm Pro (white) XSPC EX 240 (white) XSPC EX 360 (white) 
CoolingCoolingCoolingCooling
Swiftech MCP655 Monsoon Dual Bay Reservoir Monsoon Modular Tube Reservoir Monsoon Stand Alone Pump Top/Cover 
CoolingPower
EK GTX 970 Water Block Corsair AX760i 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600K Sandy Bridge 3.4 GHz Gigabyte GA-P67A-UD4-B3 GTX 285 GTX 285 
RAMHard DriveHard DriveCooling
Corsair Vengeance 16GB Western Digital 1TB Western Digital 250GB EK-Supremacy Clean CSQ - Nickel 
CoolingCoolingCoolingCooling
XSPC RX 360 XSPC EX 360 (cross flow) FrozenQ T-virus Reservoir EK Waterblock GTX 285 
Cooling
Swiftech MCP655 
  hide details  
Reply
post #16 of 96
Thread Starter 
Hm, interesting, the frozenq reservoir doesn't fit in the seemingly common spot in the 800d that I've seen other use. Either mine is slightly off or they have made a new hole slightly higher.

I attempted to mount it like this person did:



However, the holding clamp things for mine (in those sATX holes) are too far apart; if one clamp goes around the reservoir tube, the other only reaches to the black top/bottom portion of the reservoir, and it is not meant to be attached there. Guess I'll be drilling a new hole soon.
 
Mineral Oil PC
(7 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4790K Devil's Canyon 4.0GHz ASUS Sabertooth Z97 Mark S (White) Zotac GTX 760 Avexir Raiden 16GB DDR3 
Hard DriveCoolingCoolingCooling
OCZ Trion 240GB XSPC Raystorm Pro (white) XSPC EX 240 (white) XSPC EX 360 (white) 
CoolingCoolingCoolingCooling
Swiftech MCP655 Monsoon Dual Bay Reservoir Monsoon Modular Tube Reservoir Monsoon Stand Alone Pump Top/Cover 
CoolingPower
EK GTX 970 Water Block Corsair AX760i 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600K Sandy Bridge 3.4 GHz Gigabyte GA-P67A-UD4-B3 GTX 285 GTX 285 
RAMHard DriveHard DriveCooling
Corsair Vengeance 16GB Western Digital 1TB Western Digital 250GB EK-Supremacy Clean CSQ - Nickel 
CoolingCoolingCoolingCooling
XSPC RX 360 XSPC EX 360 (cross flow) FrozenQ T-virus Reservoir EK Waterblock GTX 285 
Cooling
Swiftech MCP655 
  hide details  
Reply
 
Mineral Oil PC
(7 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4790K Devil's Canyon 4.0GHz ASUS Sabertooth Z97 Mark S (White) Zotac GTX 760 Avexir Raiden 16GB DDR3 
Hard DriveCoolingCoolingCooling
OCZ Trion 240GB XSPC Raystorm Pro (white) XSPC EX 240 (white) XSPC EX 360 (white) 
CoolingCoolingCoolingCooling
Swiftech MCP655 Monsoon Dual Bay Reservoir Monsoon Modular Tube Reservoir Monsoon Stand Alone Pump Top/Cover 
CoolingPower
EK GTX 970 Water Block Corsair AX760i 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600K Sandy Bridge 3.4 GHz Gigabyte GA-P67A-UD4-B3 GTX 285 GTX 285 
RAMHard DriveHard DriveCooling
Corsair Vengeance 16GB Western Digital 1TB Western Digital 250GB EK-Supremacy Clean CSQ - Nickel 
CoolingCoolingCoolingCooling
XSPC RX 360 XSPC EX 360 (cross flow) FrozenQ T-virus Reservoir EK Waterblock GTX 285 
Cooling
Swiftech MCP655 
  hide details  
Reply
post #17 of 96
i would still use a 90 degree rotary for the inlet if you were to put it at the top though.

Ive never really thought about how you would mount the reservoir
I suppose you would just drill a hole and put a bolt through the bracket and a nut to hold it there?

If you have not ordered the mcp655 yet then you should consider the 355 +top.
It would make it look a lot cleaner and you can put little L.E.D's in some of the pump tops
Then just connect the two with one of these http://www.performance-pcs.com/catal...ducts_id=27481

+ you save like $16 if you were to use comp fittings
Main rig
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel I5-3570K Asus P8Z77-V EVGA GTX 680 2GB 8GB Corsair Dominator 1600MHZ 
Hard DriveCoolingOSMonitor
Western digital caviar black 1TB EK Supreme HF copper, pmp400 + XSPC clear top,... Windows 7 64bit dell 23" LCD 
KeyboardPowerCaseMouse
Corsair K90 Corsair HX-850W Corsair 800D Logitech G500s 
Mouse PadAudio
Steel series QCK Logitech G35 
  hide details  
Reply
Main rig
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel I5-3570K Asus P8Z77-V EVGA GTX 680 2GB 8GB Corsair Dominator 1600MHZ 
Hard DriveCoolingOSMonitor
Western digital caviar black 1TB EK Supreme HF copper, pmp400 + XSPC clear top,... Windows 7 64bit dell 23" LCD 
KeyboardPowerCaseMouse
Corsair K90 Corsair HX-850W Corsair 800D Logitech G500s 
Mouse PadAudio
Steel series QCK Logitech G35 
  hide details  
Reply
post #18 of 96
Thread Starter 
The res comes with acrylic mounts with screws/nuts. The problem is, the holes in the 800D that people appear to be using (they are the holes for sATX boards) are too far apart for the reservoir to click into place (too lazy to take a picture right now).

One of the main reasons I've been looking at the mpc655 is because it's supposed to be more quiet than the 355.

Are you talking about this 355+top? http://www.sidewindercomputers.com/swmc12vdcpu1.html

How much more noisy would the 355 be than the 655, not just based on what the charts say, but from anyone's personal experience?
Edited by Tomiger - 6/22/11 at 9:39pm
 
Mineral Oil PC
(7 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4790K Devil's Canyon 4.0GHz ASUS Sabertooth Z97 Mark S (White) Zotac GTX 760 Avexir Raiden 16GB DDR3 
Hard DriveCoolingCoolingCooling
OCZ Trion 240GB XSPC Raystorm Pro (white) XSPC EX 240 (white) XSPC EX 360 (white) 
CoolingCoolingCoolingCooling
Swiftech MCP655 Monsoon Dual Bay Reservoir Monsoon Modular Tube Reservoir Monsoon Stand Alone Pump Top/Cover 
CoolingPower
EK GTX 970 Water Block Corsair AX760i 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600K Sandy Bridge 3.4 GHz Gigabyte GA-P67A-UD4-B3 GTX 285 GTX 285 
RAMHard DriveHard DriveCooling
Corsair Vengeance 16GB Western Digital 1TB Western Digital 250GB EK-Supremacy Clean CSQ - Nickel 
CoolingCoolingCoolingCooling
XSPC RX 360 XSPC EX 360 (cross flow) FrozenQ T-virus Reservoir EK Waterblock GTX 285 
Cooling
Swiftech MCP655 
  hide details  
Reply
 
Mineral Oil PC
(7 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4790K Devil's Canyon 4.0GHz ASUS Sabertooth Z97 Mark S (White) Zotac GTX 760 Avexir Raiden 16GB DDR3 
Hard DriveCoolingCoolingCooling
OCZ Trion 240GB XSPC Raystorm Pro (white) XSPC EX 240 (white) XSPC EX 360 (white) 
CoolingCoolingCoolingCooling
Swiftech MCP655 Monsoon Dual Bay Reservoir Monsoon Modular Tube Reservoir Monsoon Stand Alone Pump Top/Cover 
CoolingPower
EK GTX 970 Water Block Corsair AX760i 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600K Sandy Bridge 3.4 GHz Gigabyte GA-P67A-UD4-B3 GTX 285 GTX 285 
RAMHard DriveHard DriveCooling
Corsair Vengeance 16GB Western Digital 1TB Western Digital 250GB EK-Supremacy Clean CSQ - Nickel 
CoolingCoolingCoolingCooling
XSPC RX 360 XSPC EX 360 (cross flow) FrozenQ T-virus Reservoir EK Waterblock GTX 285 
Cooling
Swiftech MCP655 
  hide details  
Reply
post #19 of 96
ohhhh i get you.

Yes ive heard it is quieter also.

As long as you don't butcher the holes and some how have to re-do them it will look nice and clean.
Main rig
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel I5-3570K Asus P8Z77-V EVGA GTX 680 2GB 8GB Corsair Dominator 1600MHZ 
Hard DriveCoolingOSMonitor
Western digital caviar black 1TB EK Supreme HF copper, pmp400 + XSPC clear top,... Windows 7 64bit dell 23" LCD 
KeyboardPowerCaseMouse
Corsair K90 Corsair HX-850W Corsair 800D Logitech G500s 
Mouse PadAudio
Steel series QCK Logitech G35 
  hide details  
Reply
Main rig
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel I5-3570K Asus P8Z77-V EVGA GTX 680 2GB 8GB Corsair Dominator 1600MHZ 
Hard DriveCoolingOSMonitor
Western digital caviar black 1TB EK Supreme HF copper, pmp400 + XSPC clear top,... Windows 7 64bit dell 23" LCD 
KeyboardPowerCaseMouse
Corsair K90 Corsair HX-850W Corsair 800D Logitech G500s 
Mouse PadAudio
Steel series QCK Logitech G35 
  hide details  
Reply
post #20 of 96
Thread Starter 
Yeah I'm pretty sure I can make a new hole just above the standard one for the reservoir.

As for now, gonna finish up cleaning the block and get some sleep. I need to get a lighter or some other reliable heat source tomorrow so I can sleeve something.
 
Mineral Oil PC
(7 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4790K Devil's Canyon 4.0GHz ASUS Sabertooth Z97 Mark S (White) Zotac GTX 760 Avexir Raiden 16GB DDR3 
Hard DriveCoolingCoolingCooling
OCZ Trion 240GB XSPC Raystorm Pro (white) XSPC EX 240 (white) XSPC EX 360 (white) 
CoolingCoolingCoolingCooling
Swiftech MCP655 Monsoon Dual Bay Reservoir Monsoon Modular Tube Reservoir Monsoon Stand Alone Pump Top/Cover 
CoolingPower
EK GTX 970 Water Block Corsair AX760i 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600K Sandy Bridge 3.4 GHz Gigabyte GA-P67A-UD4-B3 GTX 285 GTX 285 
RAMHard DriveHard DriveCooling
Corsair Vengeance 16GB Western Digital 1TB Western Digital 250GB EK-Supremacy Clean CSQ - Nickel 
CoolingCoolingCoolingCooling
XSPC RX 360 XSPC EX 360 (cross flow) FrozenQ T-virus Reservoir EK Waterblock GTX 285 
Cooling
Swiftech MCP655 
  hide details  
Reply
 
Mineral Oil PC
(7 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 4790K Devil's Canyon 4.0GHz ASUS Sabertooth Z97 Mark S (White) Zotac GTX 760 Avexir Raiden 16GB DDR3 
Hard DriveCoolingCoolingCooling
OCZ Trion 240GB XSPC Raystorm Pro (white) XSPC EX 240 (white) XSPC EX 360 (white) 
CoolingCoolingCoolingCooling
Swiftech MCP655 Monsoon Dual Bay Reservoir Monsoon Modular Tube Reservoir Monsoon Stand Alone Pump Top/Cover 
CoolingPower
EK GTX 970 Water Block Corsair AX760i 
CPUMotherboardGraphicsGraphics
Intel Core i7 2600K Sandy Bridge 3.4 GHz Gigabyte GA-P67A-UD4-B3 GTX 285 GTX 285 
RAMHard DriveHard DriveCooling
Corsair Vengeance 16GB Western Digital 1TB Western Digital 250GB EK-Supremacy Clean CSQ - Nickel 
CoolingCoolingCoolingCooling
XSPC RX 360 XSPC EX 360 (cross flow) FrozenQ T-virus Reservoir EK Waterblock GTX 285 
Cooling
Swiftech MCP655 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [BUILD LOG] Black and Blue 800D - Finished