Overclock.net › Forums › AMD › AMD CPUs › Need urgent help!
New Posts  All Forums:Forum Nav:

Need urgent help!

post #1 of 2
Thread Starter 
Hello!
Yesterday I finally overclocked my 1090T to 4GHz stable. Stress-tested it and so on.
I did this on the new Gigabyte 990FXA-DU7 motherboard. But now I swapped the Cooler Master V6 GT with the V8 to see how much better the V6 GT is than the V8. The 4GHz Overclock isn't stable anymore and Workers in Prime95 keep crashing. Now I'm running at stock speeds, but the Voltages are so strange.. In CPUID HWMonitor I get 1.50V on the VCORE. And when I put my CPU on full load it goes down to 1.47V. This isn't normal at all for stock speeds. What's wrong?

PLEASE HELP ME! PLEASE!
post #2 of 2
Reset the bios and try the overclock again. Did you put new thermal paste on when you changed out the heatsink?
I don't have that board but I would assume that it would be a setting in the bios doing that. Your stock voltage should be 1.350 ish. I't been so long since I had it at stock I forget lol
R2D2
(17 items)
 
  
Reply
R2D2
(17 items)
 
  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › Need urgent help!