Overclock.net › Forums › AMD › AMD Motherboards › [Official] Gigabyte GA-990XA/970A-Series Owners' Club & Help Thread - FX-8350 support added
New Posts  All Forums:Forum Nav:

[Official] Gigabyte GA-990XA/970A-Series Owners' Club & Help Thread - FX-8350 support added - Page 264

post #2631 of 3278
Quote:
Originally Posted by Dukenukemx View Post

There's no overclock yet on this system, as I'm just checking temps first before I look into that. The Load Line Calibration is set by whatever the default settings are for the BIOS. I did find a bug in the BIOS where I was trying to undervolt the CPU, to lower the VRM temp. I tried -0.0500 and failed Prime95, so I just put it back to auto. Though auto wouldn't put it back to 1.3375 volts because the greyed out setting was being taken into account.

You can't tell the temperature of the VRM from above because the heatsink is just warm. From underneath I can tell they're getting hot, cause I happen to have the case open, due to parts I'm waiting on. Which concerns me if I plan to overclock. BTW the CPU never goes past 50C in Prime95, so I'm good there.

I'll check the LLC settings and report, but for now is it a good idea or bad idea to replace the thermal pad for thermal paste?

**EDIT**
LLC was set to AUTO so I set it to normal, and no difference. Heatsink is warm, but underneath the board it's hot.


normal LLC takes away -0.075 v of power from my fx 8320 under 100% load no matter the clock can you test how much vcore you have in idle vs 100 % load
Medusa
(23 items)
 
  
CPUMotherboardGraphicsRAM
FX 8370 5Ghz 2600/2600 32GB 24/7 Prime95 Stable... Asus Sabertooth 990fx r2.0 ASUS Radeon R9 390 DirectX 12 R9390-DC2-8GD5 8GB  CMY32GX3M4A2400C11R 
Hard DriveHard DriveOptical DriveCooling
Samsung 500GB Evo MZ-75E500B/AM Seagate  Asus DRW-24B1ST/BLK/B/AS NZXT Kraken X61 RL-KRX61-01 280mm 
CoolingCoolingCoolingCooling
NZXT Kraken X41 RL-KRX41-01 140mm NZXT Kraken G10 NF-A14 iPPC-3000 PWM, 140mm PWM,AAO Frame Techn... NF-A14 iPPC-3000 PWM, 140mm PWM,AAO Frame Techn... 
CoolingCoolingOSMonitor
NF-A14 iPPC-3000 PWM, 140mm PWM,AAO Frame Techn... NF-A14 iPPC-3000 PWM, 140mm PWM,AAO Frame Techn... Windows 7 x64 Pro HP W2207 
KeyboardPowerCaseMouse
Genius Corsair AX860i Corsair Graphite CC600TWM-WHT  Genius 
AudioAudioOther
FiiO E07K ANDES Sennheiser Momentum Over Ear Purex PXR-301 6-Slot SuperSpeed USB 3.0 Interna... 
  hide details  
Reply
Medusa
(23 items)
 
  
CPUMotherboardGraphicsRAM
FX 8370 5Ghz 2600/2600 32GB 24/7 Prime95 Stable... Asus Sabertooth 990fx r2.0 ASUS Radeon R9 390 DirectX 12 R9390-DC2-8GD5 8GB  CMY32GX3M4A2400C11R 
Hard DriveHard DriveOptical DriveCooling
Samsung 500GB Evo MZ-75E500B/AM Seagate  Asus DRW-24B1ST/BLK/B/AS NZXT Kraken X61 RL-KRX61-01 280mm 
CoolingCoolingCoolingCooling
NZXT Kraken X41 RL-KRX41-01 140mm NZXT Kraken G10 NF-A14 iPPC-3000 PWM, 140mm PWM,AAO Frame Techn... NF-A14 iPPC-3000 PWM, 140mm PWM,AAO Frame Techn... 
CoolingCoolingOSMonitor
NF-A14 iPPC-3000 PWM, 140mm PWM,AAO Frame Techn... NF-A14 iPPC-3000 PWM, 140mm PWM,AAO Frame Techn... Windows 7 x64 Pro HP W2207 
KeyboardPowerCaseMouse
Genius Corsair AX860i Corsair Graphite CC600TWM-WHT  Genius 
AudioAudioOther
FiiO E07K ANDES Sennheiser Momentum Over Ear Purex PXR-301 6-Slot SuperSpeed USB 3.0 Interna... 
  hide details  
Reply
post #2632 of 3278
Quote:
Originally Posted by M3TAl View Post

If you want lower VRM temps get rid of the plastic push pins and use actual screws. Also the stock thermal pa dis pretty bad. Fujipoly is the best around from FrozenCPU.
This board has screws with springs on them. So Gigabyte I guess learned with this board?

Surprised that you suggested this Fujipoly thermal pad. Is it really that good?
Quote:
Originally Posted by Kalistoval View Post

normal LLC takes away -0.075 v of power from my fx 8320 under 100% load no matter the clock can you test how much vcore you have in idle vs 100 % load
Vcore idle 1.344V
Vcore Prime95 ~1.332V - 1.344V but mostly stays at 1.344V
Edited by Dukenukemx - 1/12/14 at 9:04am
post #2633 of 3278
I have a rev. 1.1 GA-990XA-UD3. Without the heatpipes on the vrm and northbridge heatsinks. It does a good job with my 6300. Would it handle a 8320 with a mild overclock in a very well ventilated Arc Midi R2? I get antsy when I don't have anything new to tinker with!
post #2634 of 3278
Is it safe to run an FX 8320 4.7 with 1.55v on the GA 970A UDp?

I was getting 110º on the Vrm´s under IBT after i iced it with 2x1850rpm 92mm fans + 2 stock AMD cooler fans, now it goes up to 75º max.
post #2635 of 3278
Quote:
Originally Posted by chrisjames61 View Post

I have a rev. 1.1 GA-990XA-UD3. Without the heatpipes on the vrm and northbridge heatsinks. It does a good job with my 6300. Would it handle a 8320 with a mild overclock in a very well ventilated Arc Midi R2? I get antsy when I don't have anything new to tinker with!

I've got a GA-990XA-UD3 with an fx 8320 smile.gif 4.4ghz no probz biggrin.gif
Ma Rig...
(19 items)
 
   
CPUMotherboardGraphicsRAM
AMD FX 8320 @ 4.42Ghz  Gigabyte 990XA-UD3 Rev.3 AM3+ Inno3D HerxuleZ X2 GTX 970 4GB GGDR5 HyperX FURY 16 GB White DDR3 @ 1866Mhz 
Hard DriveHard DriveHard DriveHard Drive
256GB Samsung 840 Pro SSD  WD 3.5" 1TB Hitachi 3.5" 500GB  WD 3.5" 250GB  
Optical DriveCoolingOSMonitor
Samsung 18x DVD ROM Sata Cooler Master Hyper Evo 212 (x2 120mm fan P&P) Windows 8.1 Professional 64Bit Samsung S24D300HS 24" 
MonitorKeyboardPowerCase
Samsung S24B150BL 24"  MechanicalEagle Z-77 87 Key OCZ StealthXStream ii 600w Vaporise V9 Blue Mid ATX Case 
MouseMouse PadAudio
Logitec G302 Daedalus Prime Razer Goliathus Speed Edition Medium Corsair Raptor HS40 7.1  
CPUMotherboardGraphicsRAM
Intel Core i7 2600 @ 3.4Ghz Intel DQ67SW LGA 1155 MSI GTX 1070 ARMOR OC 8Gb GGDR5 Corsair XMS 20Gb's DDR3 @ 1333Mhz 
Hard DriveHard DriveHard DriveCooling
256GB Samsung 840 Pro SSD  240GB Kingston UV400 SSD 1TB WD + 500GB WD Zalman CNPS5X Performa 
OSMonitorMonitorKeyboard
Windows 7 Home Premium 64bit LG 29" 29UM58-P IPS 21:9 Ultrawide  LG 22" 22M47VQ IPS MOTOSPEED Inflictor CK104 
PowerCaseMouseMouse Pad
Aerocool Integrator 500W AvP Viper Black Mini Tower  Logitech G402 Hyperion Fury Razer Golothus Speed 
Audio
Corsair HS40 + Logitec Z333 Speakers + Sub 
  hide details  
Reply
Ma Rig...
(19 items)
 
   
CPUMotherboardGraphicsRAM
AMD FX 8320 @ 4.42Ghz  Gigabyte 990XA-UD3 Rev.3 AM3+ Inno3D HerxuleZ X2 GTX 970 4GB GGDR5 HyperX FURY 16 GB White DDR3 @ 1866Mhz 
Hard DriveHard DriveHard DriveHard Drive
256GB Samsung 840 Pro SSD  WD 3.5" 1TB Hitachi 3.5" 500GB  WD 3.5" 250GB  
Optical DriveCoolingOSMonitor
Samsung 18x DVD ROM Sata Cooler Master Hyper Evo 212 (x2 120mm fan P&P) Windows 8.1 Professional 64Bit Samsung S24D300HS 24" 
MonitorKeyboardPowerCase
Samsung S24B150BL 24"  MechanicalEagle Z-77 87 Key OCZ StealthXStream ii 600w Vaporise V9 Blue Mid ATX Case 
MouseMouse PadAudio
Logitec G302 Daedalus Prime Razer Goliathus Speed Edition Medium Corsair Raptor HS40 7.1  
CPUMotherboardGraphicsRAM
Intel Core i7 2600 @ 3.4Ghz Intel DQ67SW LGA 1155 MSI GTX 1070 ARMOR OC 8Gb GGDR5 Corsair XMS 20Gb's DDR3 @ 1333Mhz 
Hard DriveHard DriveHard DriveCooling
256GB Samsung 840 Pro SSD  240GB Kingston UV400 SSD 1TB WD + 500GB WD Zalman CNPS5X Performa 
OSMonitorMonitorKeyboard
Windows 7 Home Premium 64bit LG 29" 29UM58-P IPS 21:9 Ultrawide  LG 22" 22M47VQ IPS MOTOSPEED Inflictor CK104 
PowerCaseMouseMouse Pad
Aerocool Integrator 500W AvP Viper Black Mini Tower  Logitech G402 Hyperion Fury Razer Golothus Speed 
Audio
Corsair HS40 + Logitec Z333 Speakers + Sub 
  hide details  
Reply
post #2636 of 3278
Quote:
Originally Posted by Ningi07 View Post

I've got a GA-990XA-UD3 with an fx 8320 smile.gif 4.4ghz no probz biggrin.gif




Rev. 1.1 without the heat pipes? Didn't the later rev. boards have more robust vrm and northbridge cooling?
Edited by chrisjames61 - 1/12/14 at 2:36pm
post #2637 of 3278
Only the 4.0 revision has the heatpipes I think.
Quote:
Originally Posted by Dukenukemx View Post

This board has screws with springs on them. So Gigabyte I guess learned with this board?

Surprised that you suggested this Fujipoly thermal pad. Is it really that good?
Vcore idle 1.344V
Vcore Prime95 ~1.332V - 1.344V but mostly stays at 1.344V

That's probably still better than the stock pad, I use the Fujipoly Extreme 11.0 W/mK.
Quote:
Originally Posted by chrisjames61 View Post

I have a rev. 1.1 GA-990XA-UD3. Without the heatpipes on the vrm and northbridge heatsinks. It does a good job with my 6300. Would it handle a 8320 with a mild overclock in a very well ventilated Arc Midi R2? I get antsy when I don't have anything new to tinker with!

Will handle an 8320 just fine with mild overclock. Only gets sketchy once you start pushing past ~1.49 V.
Quote:
Originally Posted by Tasm View Post

Is it safe to run an FX 8320 4.7 with 1.55v on the GA 970A UDp?

I was getting 110º on the Vrm´s under IBT after i iced it with 2x1850rpm 92mm fans + 2 stock AMD cooler fans, now it goes up to 75º max.

Not safe unless you've made sure the heatsink is making good contact and you have direct airflow on the heatsink. What are you using to check VRM temps?
DeskoSaurus X
(22 items)
 
It Does Stuff
(24 items)
 
 
CPUMotherboardGraphicsRAM
4790K 4.7 GHz Z97 MPOWER MAX AC 290X Lightning G. Skill TridentX 2x8GB 10-12-12 
Hard DriveHard DriveCoolingCooling
2x Crucial MX100 + 960GB M500 2x WD Blue RAID EK Supremacy EK-FC R9-290X Lightning 
CoolingCoolingCoolingOS
EK XE 480 + EK CoolStream PE 480 10x Phanteks + 2x Cougar Vortex MCP50X + MCP50X Windows 10 Pro 
MonitorKeyboardPowerCase
ViewSonic VX2250 22" LED Generic HP Corsair AX860i Lian-Li DK-Q2X 
MouseMouse PadAudioOther
Logitech G700 XTRAC Ripper TC Electronic Impact Twin Corsair Commander Mini 
OtherOther
Schiit Vali Kanto Yumi (Bamboo) 
CPUMotherboardGraphicsRAM
FX-8350 4.95GHz 24/7 GA-990FXA-UD3 Sapphire 7870 XT  Mushkin Redline 997051 @1866 8-8-8-24 1T 
RAMHard DriveHard DriveCooling
Crucial Ballistix Tactical Tracer @1866 8-8-8-2... Black WD6401AALS 2x WD10EZEX Raid-0 EK Supremacy 
CoolingCoolingCoolingCooling
10x Cougar Vortex PWM 3x Helix EK VGA Supremacy Acetal Alphacool NexXxos ST30 240mm, 2x XT45 240mm XSPC X2O 750 
CoolingOSMonitorKeyboard
Jingway DP-600 pump Windows 8.1 Pro x64 ViewSonic VX2250 22" LED Generic HP 
PowerCaseMouseAudio
Rosewill HIVE-650 CM 690 II Advanced B&W  Logitech G700 Xonar DG 
AudioOtherOther
Tc Electronic Impact Twin Fan Controller: Aerocool X-Vision 2x Swiftech PWM Splitter 
  hide details  
Reply
DeskoSaurus X
(22 items)
 
It Does Stuff
(24 items)
 
 
CPUMotherboardGraphicsRAM
4790K 4.7 GHz Z97 MPOWER MAX AC 290X Lightning G. Skill TridentX 2x8GB 10-12-12 
Hard DriveHard DriveCoolingCooling
2x Crucial MX100 + 960GB M500 2x WD Blue RAID EK Supremacy EK-FC R9-290X Lightning 
CoolingCoolingCoolingOS
EK XE 480 + EK CoolStream PE 480 10x Phanteks + 2x Cougar Vortex MCP50X + MCP50X Windows 10 Pro 
MonitorKeyboardPowerCase
ViewSonic VX2250 22" LED Generic HP Corsair AX860i Lian-Li DK-Q2X 
MouseMouse PadAudioOther
Logitech G700 XTRAC Ripper TC Electronic Impact Twin Corsair Commander Mini 
OtherOther
Schiit Vali Kanto Yumi (Bamboo) 
CPUMotherboardGraphicsRAM
FX-8350 4.95GHz 24/7 GA-990FXA-UD3 Sapphire 7870 XT  Mushkin Redline 997051 @1866 8-8-8-24 1T 
RAMHard DriveHard DriveCooling
Crucial Ballistix Tactical Tracer @1866 8-8-8-2... Black WD6401AALS 2x WD10EZEX Raid-0 EK Supremacy 
CoolingCoolingCoolingCooling
10x Cougar Vortex PWM 3x Helix EK VGA Supremacy Acetal Alphacool NexXxos ST30 240mm, 2x XT45 240mm XSPC X2O 750 
CoolingOSMonitorKeyboard
Jingway DP-600 pump Windows 8.1 Pro x64 ViewSonic VX2250 22" LED Generic HP 
PowerCaseMouseAudio
Rosewill HIVE-650 CM 690 II Advanced B&W  Logitech G700 Xonar DG 
AudioOtherOther
Tc Electronic Impact Twin Fan Controller: Aerocool X-Vision 2x Swiftech PWM Splitter 
  hide details  
Reply
post #2638 of 3278
Hey guys got a problem with my Motherboard/Cpu. My motherboard is a Gigabyte GA-990xa UD3 and the rest of my specs are in my Sig Rig I went into the bios to raise the Cpu vcore to 1.36v to make it was stable @4.4ghz and when I saved the changes and my pc reboot it did not come back on... it boots for about 4-6 seconds and my pc just cuts out, not even enough time to get a display up on the monitor. I have my old am3 phenom 955 that I could stick in if that helps. Thanks
Ma Rig...
(19 items)
 
   
CPUMotherboardGraphicsRAM
AMD FX 8320 @ 4.42Ghz  Gigabyte 990XA-UD3 Rev.3 AM3+ Inno3D HerxuleZ X2 GTX 970 4GB GGDR5 HyperX FURY 16 GB White DDR3 @ 1866Mhz 
Hard DriveHard DriveHard DriveHard Drive
256GB Samsung 840 Pro SSD  WD 3.5" 1TB Hitachi 3.5" 500GB  WD 3.5" 250GB  
Optical DriveCoolingOSMonitor
Samsung 18x DVD ROM Sata Cooler Master Hyper Evo 212 (x2 120mm fan P&P) Windows 8.1 Professional 64Bit Samsung S24D300HS 24" 
MonitorKeyboardPowerCase
Samsung S24B150BL 24"  MechanicalEagle Z-77 87 Key OCZ StealthXStream ii 600w Vaporise V9 Blue Mid ATX Case 
MouseMouse PadAudio
Logitec G302 Daedalus Prime Razer Goliathus Speed Edition Medium Corsair Raptor HS40 7.1  
CPUMotherboardGraphicsRAM
Intel Core i7 2600 @ 3.4Ghz Intel DQ67SW LGA 1155 MSI GTX 1070 ARMOR OC 8Gb GGDR5 Corsair XMS 20Gb's DDR3 @ 1333Mhz 
Hard DriveHard DriveHard DriveCooling
256GB Samsung 840 Pro SSD  240GB Kingston UV400 SSD 1TB WD + 500GB WD Zalman CNPS5X Performa 
OSMonitorMonitorKeyboard
Windows 7 Home Premium 64bit LG 29" 29UM58-P IPS 21:9 Ultrawide  LG 22" 22M47VQ IPS MOTOSPEED Inflictor CK104 
PowerCaseMouseMouse Pad
Aerocool Integrator 500W AvP Viper Black Mini Tower  Logitech G402 Hyperion Fury Razer Golothus Speed 
Audio
Corsair HS40 + Logitec Z333 Speakers + Sub 
  hide details  
Reply
Ma Rig...
(19 items)
 
   
CPUMotherboardGraphicsRAM
AMD FX 8320 @ 4.42Ghz  Gigabyte 990XA-UD3 Rev.3 AM3+ Inno3D HerxuleZ X2 GTX 970 4GB GGDR5 HyperX FURY 16 GB White DDR3 @ 1866Mhz 
Hard DriveHard DriveHard DriveHard Drive
256GB Samsung 840 Pro SSD  WD 3.5" 1TB Hitachi 3.5" 500GB  WD 3.5" 250GB  
Optical DriveCoolingOSMonitor
Samsung 18x DVD ROM Sata Cooler Master Hyper Evo 212 (x2 120mm fan P&P) Windows 8.1 Professional 64Bit Samsung S24D300HS 24" 
MonitorKeyboardPowerCase
Samsung S24B150BL 24"  MechanicalEagle Z-77 87 Key OCZ StealthXStream ii 600w Vaporise V9 Blue Mid ATX Case 
MouseMouse PadAudio
Logitec G302 Daedalus Prime Razer Goliathus Speed Edition Medium Corsair Raptor HS40 7.1  
CPUMotherboardGraphicsRAM
Intel Core i7 2600 @ 3.4Ghz Intel DQ67SW LGA 1155 MSI GTX 1070 ARMOR OC 8Gb GGDR5 Corsair XMS 20Gb's DDR3 @ 1333Mhz 
Hard DriveHard DriveHard DriveCooling
256GB Samsung 840 Pro SSD  240GB Kingston UV400 SSD 1TB WD + 500GB WD Zalman CNPS5X Performa 
OSMonitorMonitorKeyboard
Windows 7 Home Premium 64bit LG 29" 29UM58-P IPS 21:9 Ultrawide  LG 22" 22M47VQ IPS MOTOSPEED Inflictor CK104 
PowerCaseMouseMouse Pad
Aerocool Integrator 500W AvP Viper Black Mini Tower  Logitech G402 Hyperion Fury Razer Golothus Speed 
Audio
Corsair HS40 + Logitec Z333 Speakers + Sub 
  hide details  
Reply
post #2639 of 3278
Quote:
Originally Posted by M3TAl View Post

Not safe unless you've made sure the heatsink is making good contact and you have direct airflow on the heatsink. What are you using to check VRM temps?

I do have 2 stock AMD cooler fan´s attached, plus 2x Coolink Swif 922 1850rpm moving air towards the vrm´s heatsink.

I am using Hwinfo, in my GA UD3p it will show the vrm temp, on regular 970a UD3 it wont.

Anyway, it doesnt cross 76º under IBT max with 1.55, so i guess it´s safe.

My concern is about how much power a 8+2 phase can provide to the cpu, and if with 1.55 is too much.
post #2640 of 3278
Quote:
Originally Posted by Tasm View Post

I do have 2 stock AMD cooler fan´s attached, plus 2x Coolink Swif 922 1850rpm moving air towards the vrm´s heatsink.

I am using Hwinfo, in my GA UD3p it will show the vrm temp, on regular 970a UD3 it wont.

Anyway, it doesnt cross 76º under IBT max with 1.55, so i guess it´s safe.

My concern is about how much power a 8+2 phase can provide to the cpu, and if with 1.55 is too much.

It has an actual VRM sensor? Can we see a screenshot?

I don't know what the max amperage the msofets can take/deliver, not sure. I've ran 1.7V to the CPU for a Cinebench run though with about 55F ambient and blower fan right on VRM heatsink. Back of the board where mosfets are hit 96C for about 10 seconds at the end of the bench run.
Quote:
Originally Posted by Ningi07 View Post

Hey guys got a problem with my Motherboard/Cpu. My motherboard is a Gigabyte GA-990xa UD3 and the rest of my specs are in my Sig Rig I went into the bios to raise the Cpu vcore to 1.36v to make it was stable @4.4ghz and when I saved the changes and my pc reboot it did not come back on... it boots for about 4-6 seconds and my pc just cuts out, not even enough time to get a display up on the monitor. I have my old am3 phenom 955 that I could stick in if that helps. Thanks

Have you tried resetting the cmos to get defaults back? The jumper on the board...
Edited by M3TAl - 1/13/14 at 5:01am
DeskoSaurus X
(22 items)
 
It Does Stuff
(24 items)
 
 
CPUMotherboardGraphicsRAM
4790K 4.7 GHz Z97 MPOWER MAX AC 290X Lightning G. Skill TridentX 2x8GB 10-12-12 
Hard DriveHard DriveCoolingCooling
2x Crucial MX100 + 960GB M500 2x WD Blue RAID EK Supremacy EK-FC R9-290X Lightning 
CoolingCoolingCoolingOS
EK XE 480 + EK CoolStream PE 480 10x Phanteks + 2x Cougar Vortex MCP50X + MCP50X Windows 10 Pro 
MonitorKeyboardPowerCase
ViewSonic VX2250 22" LED Generic HP Corsair AX860i Lian-Li DK-Q2X 
MouseMouse PadAudioOther
Logitech G700 XTRAC Ripper TC Electronic Impact Twin Corsair Commander Mini 
OtherOther
Schiit Vali Kanto Yumi (Bamboo) 
CPUMotherboardGraphicsRAM
FX-8350 4.95GHz 24/7 GA-990FXA-UD3 Sapphire 7870 XT  Mushkin Redline 997051 @1866 8-8-8-24 1T 
RAMHard DriveHard DriveCooling
Crucial Ballistix Tactical Tracer @1866 8-8-8-2... Black WD6401AALS 2x WD10EZEX Raid-0 EK Supremacy 
CoolingCoolingCoolingCooling
10x Cougar Vortex PWM 3x Helix EK VGA Supremacy Acetal Alphacool NexXxos ST30 240mm, 2x XT45 240mm XSPC X2O 750 
CoolingOSMonitorKeyboard
Jingway DP-600 pump Windows 8.1 Pro x64 ViewSonic VX2250 22" LED Generic HP 
PowerCaseMouseAudio
Rosewill HIVE-650 CM 690 II Advanced B&W  Logitech G700 Xonar DG 
AudioOtherOther
Tc Electronic Impact Twin Fan Controller: Aerocool X-Vision 2x Swiftech PWM Splitter 
  hide details  
Reply
DeskoSaurus X
(22 items)
 
It Does Stuff
(24 items)
 
 
CPUMotherboardGraphicsRAM
4790K 4.7 GHz Z97 MPOWER MAX AC 290X Lightning G. Skill TridentX 2x8GB 10-12-12 
Hard DriveHard DriveCoolingCooling
2x Crucial MX100 + 960GB M500 2x WD Blue RAID EK Supremacy EK-FC R9-290X Lightning 
CoolingCoolingCoolingOS
EK XE 480 + EK CoolStream PE 480 10x Phanteks + 2x Cougar Vortex MCP50X + MCP50X Windows 10 Pro 
MonitorKeyboardPowerCase
ViewSonic VX2250 22" LED Generic HP Corsair AX860i Lian-Li DK-Q2X 
MouseMouse PadAudioOther
Logitech G700 XTRAC Ripper TC Electronic Impact Twin Corsair Commander Mini 
OtherOther
Schiit Vali Kanto Yumi (Bamboo) 
CPUMotherboardGraphicsRAM
FX-8350 4.95GHz 24/7 GA-990FXA-UD3 Sapphire 7870 XT  Mushkin Redline 997051 @1866 8-8-8-24 1T 
RAMHard DriveHard DriveCooling
Crucial Ballistix Tactical Tracer @1866 8-8-8-2... Black WD6401AALS 2x WD10EZEX Raid-0 EK Supremacy 
CoolingCoolingCoolingCooling
10x Cougar Vortex PWM 3x Helix EK VGA Supremacy Acetal Alphacool NexXxos ST30 240mm, 2x XT45 240mm XSPC X2O 750 
CoolingOSMonitorKeyboard
Jingway DP-600 pump Windows 8.1 Pro x64 ViewSonic VX2250 22" LED Generic HP 
PowerCaseMouseAudio
Rosewill HIVE-650 CM 690 II Advanced B&W  Logitech G700 Xonar DG 
AudioOtherOther
Tc Electronic Impact Twin Fan Controller: Aerocool X-Vision 2x Swiftech PWM Splitter 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards
Overclock.net › Forums › AMD › AMD Motherboards › [Official] Gigabyte GA-990XA/970A-Series Owners' Club & Help Thread - FX-8350 support added