Just beeps and then oc failed
As for my ram voltage, haven't set anything. Just stoping the x so that it runs at 1600. That's it. Wot should b the voltage for ram? And any timing specification?
Try reverting back to stock before overclocking again. I've found this motherboard won't boot a safe overclock after attempting an unstable overclock (well, sometimes, the little quirks this motherboard has seem to happen at random lol)
For example, a scenario I keep having with my setup:
Safe 3.4GHz OC = boots fine
Reboot into BIOS and set 3.7GHz = crash "overclocking failed" message
Reboot into BIOS and revert back to 3.4GHz = crash "overclocking failed" message even though it's a known, safe clock.
The only way I can get it to overclock (any overclock) again is to either clear CMOS or boot at stock settings before attempting overclocks (I hope this makes sense lol).
Otherwise I'm a bit stumped, I'm 99% sure the 4.05GHz configuration I posted will at least boot. I've had 3 CPUs in this board (Athlon II 450, Semp 140 and Athlon 5200+) and they've all booted and benched with a high 300+ HT Reference Freq. Also, they were all happy to run 2700MHz+ CPU NB clocks with 1.25v to 1.275v CPU NB Voltage
EDIT: Added CPU-Z screenshot to show 300 HT/2700NHz NB running fine with 1600MHz CL7
Edited by Aaronage - 9/24/11 at 6:17am