Looking damn good now,i keep getting updates via email as i subbed at start,just popped in now to check up.
Just looking at list of parts as i noticed you have Yate loons.
I also note you had parts delivered from Aquatunning.
I bought Yateloons from Aquatunning
is that where you got yours from?
I got 2xD12SH-12 from Aquatunning for my bottom rad and ran 2 other coolermaster i allready had on my top rad.
At first the yateloons were awesome pushing deccent amounts of air,bit of noise i suppose but acceptable for the amount of air they shifted,anyway...i checked them out about 10 weeks later when i got a 2nd GPU blocked and installed and noticed that they were both knackered allready
They had really really slowed down,at first i was sure it was just my fan controller settings but after plugging them straight to my PSU via molex to 3 pin adapter i found the same,they had deffo crapped out.
I had them right in front of me on my table blowing probs about 1/3 the air they did 2 month ealrlier,something deffo wrong with them.
Be carefull if yours are from Aquatunning,i have since bought some from a W/C shop on ebay and they fine,exact same model D12SH-12 but slight difference in the frame design from the ones on Aquatunning i got last year.
Anyway,keep your eye on them buddy.
Great build though,im really loving the size of that case,so much room for future upgrades,could have pretty much anything in there