Overclock.net › Forums › Case Mods & Cases › Computer Cases › Silverstone TJ08-E Owners Club.
New Posts  All Forums:Forum Nav:

Silverstone TJ08-E Owners Club. - Page 8

post #71 of 4587
7/23/11 at 11:16am
Quote:
Originally Posted by veblen View Post
Thanks nagle and IRO-Bot for the measurements.

It's disappointing that the 200mm rad won't fit. I wonder if a 2x120mm rad will fit; the 180mm fan will have to be removed, of course, but looking at the pictures, a 2x120mm rad may be too tall to fit under the 5.25" cage.
Looks like it will, but you'll have to take the bottom cage off and cut off the 3.5 front plate holder. From the floor of the case to the bottom of 5.25 cage should be enough room. Although you'll have to bring it out a little to avoid the front panel wires. But there is enough room.
New Build In Progress
(7 items)
  		  
GraphicsRAMHard DriveOptical Drive
EVGA GTX 670 CORSAIR Dominator Platinum 16GB Samsung 830 SSD 128GB Samsung Spinpoint 1TB 
Optical DriveOSPower
Western Digital Blue 750GB 2.5inch Windows 8 64bit SeaSonic SS-660XP 660W 80Plus Platinum 
View all
  hide details  
Reply
New Build In Progress
(7 items)
  		  
GraphicsRAMHard DriveOptical Drive
EVGA GTX 670 CORSAIR Dominator Platinum 16GB Samsung 830 SSD 128GB Samsung Spinpoint 1TB 
Optical DriveOSPower
Western Digital Blue 750GB 2.5inch Windows 8 64bit SeaSonic SS-660XP 660W 80Plus Platinum 
View all
  hide details  
Reply

Gear mentioned in this thread:

post #72 of 4587
7/23/11 at 11:19am
Quote:
Originally Posted by nagle3092 View Post
Hmm, make sure the usb3 header is enabled in the bios (I would think it has an option for it). If that don't work test something else in the front panel ports. If it still don't work try the adapter that came with it and plug it into a usb2 header on the mobo. If it works then I bet the usb3 header is faulty.
NVM, I see the adapter. Well I tried it and it works, so the front panel usb 3.0 works. Just not when I plug it into the 3.0 header.

It says the Asmedia USB 3.0 Controller is enabled but the USB 3.0 charging is disabled. Plus the USB legacy mode is enabled and USB 3.0 legacy is enabled while EHCI is disabled.
Edited by IRO-Bot - 7/23/11 at 12:32pm
New Build In Progress
(7 items)
  		  
GraphicsRAMHard DriveOptical Drive
EVGA GTX 670 CORSAIR Dominator Platinum 16GB Samsung 830 SSD 128GB Samsung Spinpoint 1TB 
Optical DriveOSPower
Western Digital Blue 750GB 2.5inch Windows 8 64bit SeaSonic SS-660XP 660W 80Plus Platinum 
View all
  hide details  
Reply
New Build In Progress
(7 items)
  		  
GraphicsRAMHard DriveOptical Drive
EVGA GTX 670 CORSAIR Dominator Platinum 16GB Samsung 830 SSD 128GB Samsung Spinpoint 1TB 
Optical DriveOSPower
Western Digital Blue 750GB 2.5inch Windows 8 64bit SeaSonic SS-660XP 660W 80Plus Platinum 
View all
  hide details  
Reply
post #73 of 4587
7/23/11 at 1:00pm
  • Joined: May 2010
  • Location: WA
  • Posts: 4,456
  • Rep: 285 (Unique: 234)
  • Trader Rating: 6
  • Folding Team Rank: 348
  •  
    Name Team Rank Points / Jun Work Units / Jun
    nagle3092 348 8,222,509 / 5,688,574 997 / 173
    A member of the Overclock.net HWBot Team    
  • Select All Posts By This User
Quote:
Originally Posted by IRO-Bot View Post
NVM, I see the adapter. Well I tried it and it works, so the front panel usb 3.0 works. Just not when I plug it into the 3.0 header.

It says the Asmedia USB 3.0 Controller is enabled but the USB 3.0 charging is disabled. Plus the USB legacy mode is enabled and USB 3.0 legacy is enabled while EHCI is disabled.
Try enabling charging and EHCI. If it still dont work I would say RMA the board. I have seen a couple cases of those boards not working right now.
Pixel Raping Fury V2.0
(18 items)
  		  
CPUMotherboardGraphicsRAM
i7 3770K @ 5.0ghz MSI Z77 MPower Evga GeForce GTX Titan SLI G.Skill Trident X 2666mhz 
Hard DriveHard DriveHard DriveCooling
Sandisk Extreme Corsair F60 WD Red XSPC Raystorm 
CoolingCoolingCoolingOS
Alphacool NexXxos XT45 360mm X2 XSPC Razor Titan blocks with backplates XSPC Dual D5 Bay Res Windows 8 Pro 
MonitorKeyboardPowerCase
Dell U2713HM Logitech G710+ Seasonic 1000w Dimastech Easy V3.0 Test Bench 
MouseMouse Pad
Logitech G400 XTrac Ripper XXL  
View all
  hide details  
Reply
Pixel Raping Fury V2.0
(18 items)
  		  
CPUMotherboardGraphicsRAM
i7 3770K @ 5.0ghz MSI Z77 MPower Evga GeForce GTX Titan SLI G.Skill Trident X 2666mhz 
Hard DriveHard DriveHard DriveCooling
Sandisk Extreme Corsair F60 WD Red XSPC Raystorm 
CoolingCoolingCoolingOS
Alphacool NexXxos XT45 360mm X2 XSPC Razor Titan blocks with backplates XSPC Dual D5 Bay Res Windows 8 Pro 
MonitorKeyboardPowerCase
Dell U2713HM Logitech G710+ Seasonic 1000w Dimastech Easy V3.0 Test Bench 
MouseMouse Pad
Logitech G400 XTrac Ripper XXL  
View all
  hide details  
Reply
post #74 of 4587
7/23/11 at 1:14pm
Im building a new setup soon, and i really like this case, specially micro atx build, but im not sure all will fit maybe someone can help me out. This is what im planning,

CASE: Silverstone TJ08B-E
PSU: Seasonic X-660 (SS-660KM)
MOBO: ASUS Maximus IV Gene-Z
CPU: Intel Core i5-2500K
CPU Cooler: Thermalright HR02 Macho
Memory: CORSAIR Vengeance 8GB (2 x 4GB) DDR3 1600
GPU: Galaxy GeForce GTX 580

From nagle3092 post, he was able to fit a Noctua NH-C14, which according to noctuas website specs has Height = 105 mm, width = 140 mm, Depth = 166 mm. Im thinking on going with Thermalright HR02 Macho, according to Silverstone specs accepts 165mm height coolers (HR02 = 162mm), and the specs of thermalright hr02 places it at 140mm width (the same as the neagle noctuas), still have my doubts into if it will fit with the Gene Z having so close the PCIe and the Galaxy having a backplate, what do you guys think before i order all parts?

Thanks for any opinions or suggestions, hoping soon to get into the TJ08E owners club.
MicroMi
(15 items)
 
ServeMi
(15 items)
 
MiniMi
(9 items)
 
CPUMotherboardGraphicsRAM
Intel Core i5-2500K ASUS Maximus IV Gene-Z Galaxy Geforce GTX580 G.SKILL Sniper 8GB DDR3 1600 
Hard DriveCoolingOSMonitor
Crucial M4 256GB + Samsung HD502HJ 500GB Thermalright HR02 Windows 7 HP 64bit Sumsung S27A850D 
KeyboardPowerCaseMouse
Logitech G710+ Seasonic X660 (SS-660KM) Silverstone TJ08B-E Logitech MX518 
Mouse PadAudio
Steelseries QcK Mini SupremeFX X-Fi 2 + Emotiva UPA5 + JBL NSP1 
View all
CPUMotherboardGraphicsRAM
Intel Xeon E3-1230 SUPERMICRO MBD-X9SCM-F-O Matrox G200eW Kingston 4GB ECC DDR3 1333 
Hard DriveCoolingOSPower
8x Hitachi 5K3000 2TB + 6x Samsung HD154UI 1.5TB Thermalright AXP-140 WHSv1 Antec CP-850 
CaseOther
Antec 1200 + 4x Cooler Master 4 in 3 2x Intel SASUC8I 
View all
CPUMotherboardGraphicsRAM
Intel Core i3-2100T Intel DH61DLB3 Intel HD2000 Kingston HyperX LoVo 4GB DDR1333 
Hard DriveCoolingOSPower
Hitachi 5K500B Thermalright HR02 Windows 7 HP picoPSU 150XT 
Case
Lian Li Q08 
View all
  hide details  
Reply
MicroMi
(15 items)
 
ServeMi
(15 items)
 
MiniMi
(9 items)
 
CPUMotherboardGraphicsRAM
Intel Core i5-2500K ASUS Maximus IV Gene-Z Galaxy Geforce GTX580 G.SKILL Sniper 8GB DDR3 1600 
Hard DriveCoolingOSMonitor
Crucial M4 256GB + Samsung HD502HJ 500GB Thermalright HR02 Windows 7 HP 64bit Sumsung S27A850D 
KeyboardPowerCaseMouse
Logitech G710+ Seasonic X660 (SS-660KM) Silverstone TJ08B-E Logitech MX518 
Mouse PadAudio
Steelseries QcK Mini SupremeFX X-Fi 2 + Emotiva UPA5 + JBL NSP1 
View all
CPUMotherboardGraphicsRAM
Intel Xeon E3-1230 SUPERMICRO MBD-X9SCM-F-O Matrox G200eW Kingston 4GB ECC DDR3 1333 
Hard DriveCoolingOSPower
8x Hitachi 5K3000 2TB + 6x Samsung HD154UI 1.5TB Thermalright AXP-140 WHSv1 Antec CP-850 
CaseOther
Antec 1200 + 4x Cooler Master 4 in 3 2x Intel SASUC8I 
View all
CPUMotherboardGraphicsRAM
Intel Core i3-2100T Intel DH61DLB3 Intel HD2000 Kingston HyperX LoVo 4GB DDR1333 
Hard DriveCoolingOSPower
Hitachi 5K500B Thermalright HR02 Windows 7 HP picoPSU 150XT 
Case
Lian Li Q08 
View all
  hide details  
Reply
post #75 of 4587
7/23/11 at 1:31pm
Quote:
Originally Posted by Abula View Post
...what do you guys think before i order all parts?
Thanks for any opinions or suggestions, hoping soon to get into the TJ08E owners club.
If you're worried about compatibility issues you always have the option of going with one of the h-series coolers from corsair or some other closed water cooling system. Probably won't get you the best results but at least it will fit for sure It also takes some strain off of the mobo if you plan on moving your system frequently.
In need of upgrade
(13 items)
  		  
CPUMotherboardGraphicsRAM
Q6700 P5E x38 5770 1GB 4x 1GB OCZ REAPER HPC 1200MHz 
Hard DriveOSMonitorKeyboard
WD 640GB Caviar Black Windows 7 Ultimate 64-bit Samsung 2233BW OCZ ELIXIR gaming keyboard 
PowerCaseMouseMouse Pad
Corsair HX620W Antec 900 - modded SteelSeries Ikari optical Razer Goliathus ALPHA 
View all
  hide details  
Reply
In need of upgrade
(13 items)
  		  
CPUMotherboardGraphicsRAM
Q6700 P5E x38 5770 1GB 4x 1GB OCZ REAPER HPC 1200MHz 
Hard DriveOSMonitorKeyboard
WD 640GB Caviar Black Windows 7 Ultimate 64-bit Samsung 2233BW OCZ ELIXIR gaming keyboard 
PowerCaseMouseMouse Pad
Corsair HX620W Antec 900 - modded SteelSeries Ikari optical Razer Goliathus ALPHA 
View all
  hide details  
Reply
post #76 of 4587
7/23/11 at 2:14pm
  • Joined: May 2010
  • Location: WA
  • Posts: 4,456
  • Rep: 285 (Unique: 234)
  • Trader Rating: 6
  • Folding Team Rank: 348
  •  
    Name Team Rank Points / Jun Work Units / Jun
    nagle3092 348 8,222,509 / 5,688,574 997 / 173
    A member of the Overclock.net HWBot Team    
  • Select All Posts By This User
Quote:
Originally Posted by Abula View Post
Im building a new setup soon, and i really like this case, specially micro atx build, but im not sure all will fit maybe someone can help me out. This is what im planning,

CASE: Silverstone TJ08B-E
PSU: Seasonic X-660 (SS-660KM)
MOBO: ASUS Maximus IV Gene-Z
CPU: Intel Core i5-2500K
CPU Cooler: Thermalright HR02 Macho
Memory: CORSAIR Vengeance 8GB (2 x 4GB) DDR3 1600
GPU: Galaxy GeForce GTX 580

From nagle3092 post, he was able to fit a Noctua NH-C14, which according to noctuas website specs has Height = 105 mm, width = 140 mm, Depth = 166 mm. Im thinking on going with Thermalright HR02 Macho, according to Silverstone specs accepts 165mm height coolers (HR02 = 162mm), and the specs of thermalright hr02 places it at 140mm width (the same as the neagle noctuas), still have my doubts into if it will fit with the Gene Z having so close the PCIe and the Galaxy having a backplate, what do you guys think before i order all parts?

Thanks for any opinions or suggestions, hoping soon to get into the TJ08E owners club.
The HR02 will fit fine thats for sure, Silverstone uses it in an example in the manual for the TJ08-E. Dont worry about it being close to the pci slots, I have electrical tape on the wire that holds on the fan on my NH-C14 because its less than a mm from touching the card. With a backplate though theres no need to worry about it. I would stay away from the Vengence sticks though because they are pretty high and will likely cause issues if you use the HDD cage. I would look for RipjawsX, Snipers or Dominators since you can take off the heatsinks on top.
Edited by nagle3092 - 7/23/11 at 2:18pm
Pixel Raping Fury V2.0
(18 items)
  		  
CPUMotherboardGraphicsRAM
i7 3770K @ 5.0ghz MSI Z77 MPower Evga GeForce GTX Titan SLI G.Skill Trident X 2666mhz 
Hard DriveHard DriveHard DriveCooling
Sandisk Extreme Corsair F60 WD Red XSPC Raystorm 
CoolingCoolingCoolingOS
Alphacool NexXxos XT45 360mm X2 XSPC Razor Titan blocks with backplates XSPC Dual D5 Bay Res Windows 8 Pro 
MonitorKeyboardPowerCase
Dell U2713HM Logitech G710+ Seasonic 1000w Dimastech Easy V3.0 Test Bench 
MouseMouse Pad
Logitech G400 XTrac Ripper XXL  
View all
  hide details  
Reply
Pixel Raping Fury V2.0
(18 items)
  		  
CPUMotherboardGraphicsRAM
i7 3770K @ 5.0ghz MSI Z77 MPower Evga GeForce GTX Titan SLI G.Skill Trident X 2666mhz 
Hard DriveHard DriveHard DriveCooling
Sandisk Extreme Corsair F60 WD Red XSPC Raystorm 
CoolingCoolingCoolingOS
Alphacool NexXxos XT45 360mm X2 XSPC Razor Titan blocks with backplates XSPC Dual D5 Bay Res Windows 8 Pro 
MonitorKeyboardPowerCase
Dell U2713HM Logitech G710+ Seasonic 1000w Dimastech Easy V3.0 Test Bench 
MouseMouse Pad
Logitech G400 XTrac Ripper XXL  
View all
  hide details  
Reply
post #77 of 4587
7/23/11 at 2:18pm
Quote:
Originally Posted by McBean View Post
If you're worried about compatibility issues you always have the option of going with one of the h-series coolers from corsair or some other closed water cooling system. Probably won't get you the best results but at least it will fit for sure It also takes some strain off of the mobo if you plan on moving your system frequently.
Thanks for the reply,

Upon searching a little more, found Chippel Review TJ08-E Review, that uses the Gene Z + Thermalright HR02 and a long gpu, so exactly what i wanted to see, and it seems to fit.



Still a a little worried about the fan (this is a minor thing), the TY140 has to flat sides that usually are placed on the top to mantain the height of the cooler, in my Lian Li Q08 build i didnt care much as i had much more space, so i placed the flat sides with the sides, leaving the TY140 sticking some out on the top, because narrow it seems in the picture, this will be the only way to place the fan, but im not sure if the case will close installing it like that, again this is very minor i would just go for a 120mm fan instead if this is the case.
Edited by Abula - 7/24/11 at 9:23am
MicroMi
(15 items)
 
ServeMi
(15 items)
 
MiniMi
(9 items)
 
CPUMotherboardGraphicsRAM
Intel Core i5-2500K ASUS Maximus IV Gene-Z Galaxy Geforce GTX580 G.SKILL Sniper 8GB DDR3 1600 
Hard DriveCoolingOSMonitor
Crucial M4 256GB + Samsung HD502HJ 500GB Thermalright HR02 Windows 7 HP 64bit Sumsung S27A850D 
KeyboardPowerCaseMouse
Logitech G710+ Seasonic X660 (SS-660KM) Silverstone TJ08B-E Logitech MX518 
Mouse PadAudio
Steelseries QcK Mini SupremeFX X-Fi 2 + Emotiva UPA5 + JBL NSP1 
View all
CPUMotherboardGraphicsRAM
Intel Xeon E3-1230 SUPERMICRO MBD-X9SCM-F-O Matrox G200eW Kingston 4GB ECC DDR3 1333 
Hard DriveCoolingOSPower
8x Hitachi 5K3000 2TB + 6x Samsung HD154UI 1.5TB Thermalright AXP-140 WHSv1 Antec CP-850 
CaseOther
Antec 1200 + 4x Cooler Master 4 in 3 2x Intel SASUC8I 
View all
CPUMotherboardGraphicsRAM
Intel Core i3-2100T Intel DH61DLB3 Intel HD2000 Kingston HyperX LoVo 4GB DDR1333 
Hard DriveCoolingOSPower
Hitachi 5K500B Thermalright HR02 Windows 7 HP picoPSU 150XT 
Case
Lian Li Q08 
View all
  hide details  
Reply
MicroMi
(15 items)
 
ServeMi
(15 items)
 
MiniMi
(9 items)
 
CPUMotherboardGraphicsRAM
Intel Core i5-2500K ASUS Maximus IV Gene-Z Galaxy Geforce GTX580 G.SKILL Sniper 8GB DDR3 1600 
Hard DriveCoolingOSMonitor
Crucial M4 256GB + Samsung HD502HJ 500GB Thermalright HR02 Windows 7 HP 64bit Sumsung S27A850D 
KeyboardPowerCaseMouse
Logitech G710+ Seasonic X660 (SS-660KM) Silverstone TJ08B-E Logitech MX518 
Mouse PadAudio
Steelseries QcK Mini SupremeFX X-Fi 2 + Emotiva UPA5 + JBL NSP1 
View all
CPUMotherboardGraphicsRAM
Intel Xeon E3-1230 SUPERMICRO MBD-X9SCM-F-O Matrox G200eW Kingston 4GB ECC DDR3 1333 
Hard DriveCoolingOSPower
8x Hitachi 5K3000 2TB + 6x Samsung HD154UI 1.5TB Thermalright AXP-140 WHSv1 Antec CP-850 
CaseOther
Antec 1200 + 4x Cooler Master 4 in 3 2x Intel SASUC8I 
View all
CPUMotherboardGraphicsRAM
Intel Core i3-2100T Intel DH61DLB3 Intel HD2000 Kingston HyperX LoVo 4GB DDR1333 
Hard DriveCoolingOSPower
Hitachi 5K500B Thermalright HR02 Windows 7 HP picoPSU 150XT 
Case
Lian Li Q08 
View all
  hide details  
Reply
post #78 of 4587
7/23/11 at 2:21pm
  • Joined: May 2010
  • Location: WA
  • Posts: 4,456
  • Rep: 285 (Unique: 234)
  • Trader Rating: 6
  • Folding Team Rank: 348
  •  
    Name Team Rank Points / Jun Work Units / Jun
    nagle3092 348 8,222,509 / 5,688,574 997 / 173
    A member of the Overclock.net HWBot Team    
  • Select All Posts By This User
Quote:
Originally Posted by Abula View Post
Thanks for the reply,

Upon searching a little more, found Chippel Review TJ08-E Review, that uses the Gene Z + Thermalright HR02 and a long gpu, so exactly what i wanted to see, and it seems to fit.



Still a a little worried about the fan (this is a minor thing), the TY140 has to flat sides that usually are placed on the top to mantain the height of the cooler, in my Lian Li Q07 build i didnt care much as i had much more space, so i placed the flat sides with the sides, leaving the TY140 sticking some out on the top, because of how slim the cooler will be from the video card, this will be the only way to place the fan, but im not sure if the case will close installing it like that, again this is very minor i would just go for a 120mm fan instead if this is the case.
Yeah if it dont fit with the 140mm just use a 120mm. Remember the HR02 was designed to be fanless.
Pixel Raping Fury V2.0
(18 items)
  		  
CPUMotherboardGraphicsRAM
i7 3770K @ 5.0ghz MSI Z77 MPower Evga GeForce GTX Titan SLI G.Skill Trident X 2666mhz 
Hard DriveHard DriveHard DriveCooling
Sandisk Extreme Corsair F60 WD Red XSPC Raystorm 
CoolingCoolingCoolingOS
Alphacool NexXxos XT45 360mm X2 XSPC Razor Titan blocks with backplates XSPC Dual D5 Bay Res Windows 8 Pro 
MonitorKeyboardPowerCase
Dell U2713HM Logitech G710+ Seasonic 1000w Dimastech Easy V3.0 Test Bench 
MouseMouse Pad
Logitech G400 XTrac Ripper XXL  
View all
  hide details  
Reply
Pixel Raping Fury V2.0
(18 items)
  		  
CPUMotherboardGraphicsRAM
i7 3770K @ 5.0ghz MSI Z77 MPower Evga GeForce GTX Titan SLI G.Skill Trident X 2666mhz 
Hard DriveHard DriveHard DriveCooling
Sandisk Extreme Corsair F60 WD Red XSPC Raystorm 
CoolingCoolingCoolingOS
Alphacool NexXxos XT45 360mm X2 XSPC Razor Titan blocks with backplates XSPC Dual D5 Bay Res Windows 8 Pro 
MonitorKeyboardPowerCase
Dell U2713HM Logitech G710+ Seasonic 1000w Dimastech Easy V3.0 Test Bench 
MouseMouse Pad
Logitech G400 XTrac Ripper XXL  
View all
  hide details  
Reply
post #79 of 4587
7/23/11 at 5:19pm
Quote:
Originally Posted by nagle3092 View Post
Try enabling charging and EHCI. If it still dont work I would say RMA the board. I have seen a couple cases of those boards not working right now.
Nope, none of that worked. Oh well, I just plugged it into the 2.0. I don't really care if it's USB 3.0 in the front or not. Just as long as they work. Only use the thumb drives in the front anyways and have the 3.0 external attached to the back. Don't wanna go through the hassles of RMA'ing plus taking everything apart again.
New Build In Progress
(7 items)
  		  
GraphicsRAMHard DriveOptical Drive
EVGA GTX 670 CORSAIR Dominator Platinum 16GB Samsung 830 SSD 128GB Samsung Spinpoint 1TB 
Optical DriveOSPower
Western Digital Blue 750GB 2.5inch Windows 8 64bit SeaSonic SS-660XP 660W 80Plus Platinum 
View all
  hide details  
Reply
New Build In Progress
(7 items)
  		  
GraphicsRAMHard DriveOptical Drive
EVGA GTX 670 CORSAIR Dominator Platinum 16GB Samsung 830 SSD 128GB Samsung Spinpoint 1TB 
Optical DriveOSPower
Western Digital Blue 750GB 2.5inch Windows 8 64bit SeaSonic SS-660XP 660W 80Plus Platinum 
View all
  hide details  
Reply
post #80 of 4587
7/23/11 at 9:08pm
Thread Starter 
Quote:
Originally Posted by Abula View Post
Im building a new setup soon, and i really like this case, specially micro atx build, but im not sure all will fit maybe someone can help me out. This is what im planning,

CASE: Silverstone TJ08B-E
PSU: Seasonic X-660 (SS-660KM)
MOBO: ASUS Maximus IV Gene-Z
CPU: Intel Core i5-2500K
CPU Cooler: Thermalright HR02 Macho
Memory: CORSAIR Vengeance 8GB (2 x 4GB) DDR3 1600
GPU: Galaxy GeForce GTX 580

From nagle3092 post, he was able to fit a Noctua NH-C14, which according to noctuas website specs has Height = 105 mm, width = 140 mm, Depth = 166 mm. Im thinking on going with Thermalright HR02 Macho, according to Silverstone specs accepts 165mm height coolers (HR02 = 162mm), and the specs of thermalright hr02 places it at 140mm width (the same as the neagle noctuas), still have my doubts into if it will fit with the Gene Z having so close the PCIe and the Galaxy having a backplate, what do you guys think before i order all parts?

Thanks for any opinions or suggestions, hoping soon to get into the TJ08E owners club.
I'll add you to the will-be owners list!

That build looks really good, I've seen the HR02 installed in the TJ08-E in the Silverstone manuel. It didn't have fans though... It seems nagle has already helped you!

Quote:
Originally Posted by nagle3092 View Post
Try enabling charging and EHCI. If it still dont work I would say RMA the board. I have seen a couple cases of those boards not working right now.
Quote:
Originally Posted by nagle3092 View Post
The HR02 will fit fine thats for sure, Silverstone uses it in an example in the manual for the TJ08-E. Dont worry about it being close to the pci slots, I have electrical tape on the wire that holds on the fan on my NH-C14 because its less than a mm from touching the card. With a backplate though theres no need to worry about it. I would stay away from the Vengence sticks though because they are pretty high and will likely cause issues if you use the HDD cage. I would look for RipjawsX, Snipers or Dominators since you can take off the heatsinks on top.
Quote:
Originally Posted by nagle3092 View Post
Yeah if it dont fit with the 140mm just use a 120mm. Remember the HR02 was designed to be fanless.
nagle3092,

Big thanks for being so helpful and contributing positively to this club. You have been helping everyone with questions and advice and it just really increases the quality of the thread.

Cheers man. +Rep
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases

Gear mentioned in this thread:

Overclock.net › Forums › Case Mods & Cases › Computer Cases › Silverstone TJ08-E Owners Club.