hi all!
has anyone had the same problem? or something i overlooked
every time i try settings higher then 4,5 ghz it will not load windows.
4,5 ghz is a solid overclock (63C fully stressed)
i also noticed clock values change in cpu-z while running prime.
before starting prime clock is 4,5 ghz, during prime it is 4,0 - 4,4
my current bios settings:
CPU Control
CPU Ratio Setting: Manual
Max Ratio: 45
Internal PLL Overvoltage: Disabled
Intel SpeedStep Technology: Disabled
Turbo Boost Power Limit: Auto
Additional Turbo Voltage: Auto
Core Current Limit: 200
BCLK: 100.0 mhz
Spread Spectrum: Disabled
Dram configuration: XMP Profile 1 settings loaded: 9-9-9-24 1.50V DDR3-1600
Voltage Control
Power Saving Mode: Enabled
CPU Core Voltage: Offset Mode
Offset voltage: -0.010V (1.336V reading)
CPU Load-Line Calibration: Level 2
Dram Voltage: 1.500V
PCH Voltage: Auto (1.059V reading)
CPU PLL Voltage: Auto (1.668V reading)
VTT Voltage: Auto (0.986 reading)
VCCSA: Auto (0.925 reading)
CPU Configuration
Active Processor Cores: All
Hardware Prefetcher: Enabled
Adjacent Cache Line Prefetch: Enabled
Enhanced Halt State(C1E): Disabled
CPU C3 State Support: Disabled
Package C State Support: Disabled
CPU Thermal Throttling: Disabled
Intel Virtualization Technology: Disabled
No-Execute Memory Protection: Disabled
has anyone had the same problem? or something i overlooked
every time i try settings higher then 4,5 ghz it will not load windows.
4,5 ghz is a solid overclock (63C fully stressed)
i also noticed clock values change in cpu-z while running prime.
before starting prime clock is 4,5 ghz, during prime it is 4,0 - 4,4
my current bios settings:
CPU Control
CPU Ratio Setting: Manual
Max Ratio: 45
Internal PLL Overvoltage: Disabled
Intel SpeedStep Technology: Disabled
Turbo Boost Power Limit: Auto
Additional Turbo Voltage: Auto
Core Current Limit: 200
BCLK: 100.0 mhz
Spread Spectrum: Disabled
Dram configuration: XMP Profile 1 settings loaded: 9-9-9-24 1.50V DDR3-1600
Voltage Control
Power Saving Mode: Enabled
CPU Core Voltage: Offset Mode
Offset voltage: -0.010V (1.336V reading)
CPU Load-Line Calibration: Level 2
Dram Voltage: 1.500V
PCH Voltage: Auto (1.059V reading)
CPU PLL Voltage: Auto (1.668V reading)
VTT Voltage: Auto (0.986 reading)
VCCSA: Auto (0.925 reading)
CPU Configuration
Active Processor Cores: All
Hardware Prefetcher: Enabled
Adjacent Cache Line Prefetch: Enabled
Enhanced Halt State(C1E): Disabled
CPU C3 State Support: Disabled
Package C State Support: Disabled
CPU Thermal Throttling: Disabled
Intel Virtualization Technology: Disabled
No-Execute Memory Protection: Disabled