Overclock.net › Forums › Intel › Intel - General › E7400 on X48C Platinum
New Posts  All Forums:Forum Nav:

E7400 on X48C Platinum

post #1 of 2
Thread Starter 
Hello To everyone .

Im seeking assistance/opinions ön my system.

Im running a core2duo 2.8ghz e7400 @ 4ghz on a Msi X48C Platinum motherboard with 2x Apacer ddr3 1333mhz pc3 10600 memory modules running on XGR 500GT PSU.

At the moment its stable ran prime95 for 9+ hours no errors.

Following is my settings 4 everything in bios v7.4

D.O.T control = disabled
Intel EIST = disabled
Adjust CPU FSB Frequency = 380
Adjust CPU Ratio = 10.5
Adjusted CPU Frequency = 4000

At
Advanced DRAM Configuration
Configure DRAM Timing by SPD = enabled
MCH Read Delay (tRD) = auto
1N/2N Memory Timing = auto

FSB/Memory Ratio = auto
Adjusted DRAM Frequency = 912

Adjust PCI-E Frequency = 100
Adjust PCI Frequency = 33.3mhz
Auto Disable DIMM/PCI Frequency = enabled

CPU Voltage = 1.4000v
Memory Voltage = 1.50v
FSB Terminator Voltage = 1.30v
NB Voltage = auto
SB Core/CPU PLL Voltage = auto
CPU GTL Reference Voltage 1 = auto
CPU GTL Reference Voltage 2 = auto
MCH GTL Reference Voltage = auto
DDR CHA Reference Voltage = auto
DDR CHB Reference Voltage = auto
MCH DDR Reference Voltage = auto

Spread Spectrum = disabled

CPU Vcore = 1.368V

CPU Temperature = 39c
________________________________
Then In CPU-Z

CPU
Core speed = 4000.4mhz
Multiplier = 10.5
Bus speed = 381mhz
Rated fsb = 1524mhz
Core voltage = 1.384v

Memory
DRAM Frequency = 457.2mhz
Fsbram = 5:6
Cas# = 9clocks
Ras# to cas# delay = 6clocks
Ras# precharge = 6 clocks
Cycle time (tRAS) = 17clocks
Row refresh cycle time (tRFC) = 52clocks
Command rate = 1T

Spd
Max bandwidth = pc3 10700 (667mhz)

Jedec#1
6-6-6-17-23 (457mhz)

Jedec#2
7-7-7-20-27 (533mhz)

Jedec#3
8-8-8-22-30 (609mhz)

Jedec#4
9-9-9-25-34 (685mhz)

All jedec#? Voltage are 1.50v
________________________

I hope thats everything you need to help. As I said im currently at 4ghz and I feel with sloppy Ram speeds like these i can go beyond 4ghz.

I hope my msg isnt confusing.

Any ideas ön what to change/try/voltage bumps etc etc please let me know , im kinda suprized to get at 4ghz stable without changing much settings. Thanx in advance for any and all help in advance.

If you need more settings or info just ask away.
X48C
(13 items)
 
  
CPUMotherboardGraphicsRAM
E7400 Msi X48C Platinum PX9600GT 2 X 2gb Apacer 1333 Mhz 
Hard DriveOptical DriveOSPower
ST500GB Sata LG Multi Windows 7 Ultimate 64 Bit XGR-500GT 
CaseMouse
Sigma Unicorn Metal Storm Sahara 
  hide details  
Reply
X48C
(13 items)
 
  
CPUMotherboardGraphicsRAM
E7400 Msi X48C Platinum PX9600GT 2 X 2gb Apacer 1333 Mhz 
Hard DriveOptical DriveOSPower
ST500GB Sata LG Multi Windows 7 Ultimate 64 Bit XGR-500GT 
CaseMouse
Sigma Unicorn Metal Storm Sahara 
  hide details  
Reply
post #2 of 2
take your FSB termination voltage up to 1.4v. Can you figure out what is your current NB voltage? As bumping that up a little from stock will be needed but only like 1 or 2 bumps if the increments are in big steps like .025 or .0125 would prob do it if possible.

But i would find the max speed and timings your ram can handle 1st. As that will be your most limiting factor, especially since you are running it slower the rated by alot!

EDIT: Forgot to mention that you wont need to up your NB much higher until you hit 500mhz on the FSB usually.
 
Problem Solver
(15 items)
 
 
CPUMotherboardGraphicsRAM
intel Core i5 3570k 4.5ghz 1.200v - 0.000 offset  Gigabyte z77X-UP4 TH Beta Bios F11C with lastes... Sapphire 7950 3GB GSkill 2x8gb 2400mhz 11-13-13-31 T2 @ 10-13-13-... 
Hard DriveCoolingOSMonitor
Crucial M4 128GB SSD SATA 3.0 M4-CT128M4SSD1 Corsair H80 v2i AIO liquid cooling Windows 10 Professional x64 47 inch Samsung LCD HD TV 
PowerAudio
Corsair 850w modular stock 
CPUMotherboardGraphicsRAM
C2Q Q6600 GO @ 3.2ghz 1.28 Gigabyte P35 DS3-L Pencil modded Nvidia 9800 GT 512mb 2x1gb Gskill 1066 5-5-5-15 & 2x1gb Gskill Pi 80... 
Hard DriveHard DriveOptical DriveCooling
Crucial m4 CT128M4SSD1 128GB SSD - OS Drive Samsung HD103UJ & SJ 1 Terabyte HDD LG 22x DVD burner Arctic Freezer Pro 2  
OSMonitorPowerCase
Windows 7 Pro SP1 x64 HannsG 27.5" Widescreen Red thingy 750w Single rail old raidmax from 1st build beat to death 
  hide details  
Reply
 
Problem Solver
(15 items)
 
 
CPUMotherboardGraphicsRAM
intel Core i5 3570k 4.5ghz 1.200v - 0.000 offset  Gigabyte z77X-UP4 TH Beta Bios F11C with lastes... Sapphire 7950 3GB GSkill 2x8gb 2400mhz 11-13-13-31 T2 @ 10-13-13-... 
Hard DriveCoolingOSMonitor
Crucial M4 128GB SSD SATA 3.0 M4-CT128M4SSD1 Corsair H80 v2i AIO liquid cooling Windows 10 Professional x64 47 inch Samsung LCD HD TV 
PowerAudio
Corsair 850w modular stock 
CPUMotherboardGraphicsRAM
C2Q Q6600 GO @ 3.2ghz 1.28 Gigabyte P35 DS3-L Pencil modded Nvidia 9800 GT 512mb 2x1gb Gskill 1066 5-5-5-15 & 2x1gb Gskill Pi 80... 
Hard DriveHard DriveOptical DriveCooling
Crucial m4 CT128M4SSD1 128GB SSD - OS Drive Samsung HD103UJ & SJ 1 Terabyte HDD LG 22x DVD burner Arctic Freezer Pro 2  
OSMonitorPowerCase
Windows 7 Pro SP1 x64 HannsG 27.5" Widescreen Red thingy 750w Single rail old raidmax from 1st build beat to death 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › E7400 on X48C Platinum