Overclock.net › Forums › Software, Programming and Coding › Operating Systems › Windows › Check my Blue Screen Report?
New Posts  All Forums:Forum Nav:

Check my Blue Screen Report?

post #1 of 2
Thread Starter 
So here is the guide
Quote:
BSOD codes for overclocking
0x101 = increase vcore
0x124 = increase/decrease vcore or QPI/VTT...have to test to see which one it is
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1E = increase vcore
0x3B = increase vcore
0x3D = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x109 = Not enough or too Much memory voltage
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r
Here is my report

Quote:
On Sun 17/07/2011 20:51:25 GMT your computer crashed
crash dump file: C:\\Windows\\Minidump\\071711-13946-01.dmp
This was probably caused by the following module: hal.dll (hal+0x12A3B)
Bugcheck code: 0x124 (0x0, 0xFFFFFA80087D8028, 0xBE000000, 0x800400)
Error: WHEA_UNCORRECTABLE_ERROR
file path: C:\\Windows\\system32\\hal.dll
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Hardware Abstraction Layer DLL
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.
Look at the bold part above
Here it is again

Quote:
Error: WHEA_UNCORRECTABLE_ERROR
I matched this with google and found...
http://msdn.microsoft.com/en-us/libr...(v=vs.85).aspx

If you scroll and look at0x0 you will see
Quote:
A machine check exception occurred.

These parameter descriptions apply if the processor is based on the x64 architecture, or the x86 architecture that has the MCA feature available (for example, Intel Pentium Pro, Pentium IV, or Xeon).
Just wondering what this means?

Final conclusion from my report
Quote:
10 crash dumps have been found and analyzed. 3 third party drivers have been identified to be causing system crashes on your computer. It is strongly suggested that you check for updates for these drivers on their company websites. Click on the links below to search with Google for updates for these drivers:

atikmdag.sys (ATI Radeon Kernel Mode Driver, ATI Technologies Inc.)

atikmpag.sys (AMD multi-vendor Miniport Driver, Advanced Micro Devices, Inc.)
Well done AMD

Thank you.
Edited by BradleyW - 7/18/11 at 7:12am
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #2 of 2
Well, to link the two:

Code:
Bugcheck code: 0x124
Quote:
0x124 = increase/decrease vcore or QPI/VTT...have to test to see which one it is
If that helps any, I'd probably uninstall GPU drivers and then do a Guru3D driver sweeper run on them. Then reinstall.
The Iron Giant
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 950 X58A-UD3R Sapphire Radeon HD5870 Vapor-X Mushkin Silverline 3x4GB 1333MHz 
Hard DriveHard DriveHard DriveHard Drive
Samsung F3 Samsung F3 Western Digital Raptor Crucial M4 128GB 
Optical DriveCoolingOSMonitor
Sony DRU-87S Corsair H70 Windows 7 Ultimate x64 Acer X243HQBD 
KeyboardPowerCaseMouse
Ducky Shine III Seasonic X650 Lian Li Lancool K62 Zowie AM MS 
Mouse PadAudioAudio
Razer Goliathus Edirol MA-7A speakers. Sennheiser HD598 
  hide details  
Reply
The Iron Giant
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 950 X58A-UD3R Sapphire Radeon HD5870 Vapor-X Mushkin Silverline 3x4GB 1333MHz 
Hard DriveHard DriveHard DriveHard Drive
Samsung F3 Samsung F3 Western Digital Raptor Crucial M4 128GB 
Optical DriveCoolingOSMonitor
Sony DRU-87S Corsair H70 Windows 7 Ultimate x64 Acer X243HQBD 
KeyboardPowerCaseMouse
Ducky Shine III Seasonic X650 Lian Li Lancool K62 Zowie AM MS 
Mouse PadAudioAudio
Razer Goliathus Edirol MA-7A speakers. Sennheiser HD598 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Windows
Overclock.net › Forums › Software, Programming and Coding › Operating Systems › Windows › Check my Blue Screen Report?