Overclock.net › Forums › Hardware Vendors › Case Labs › Single Wide Case - Feedback Wanted
New Posts  All Forums:Forum Nav:

Single Wide Case - Feedback Wanted - Page 7

post #61 of 334
I don't want flat package. I prefer full assemble one. I don't mind paying it.
post #62 of 334
Quote:
Originally Posted by Case Labs;14854921 
It's a safe bet that will happen - along with an 85mm top wink.gif

That would make it quite a monster though biggrin.gif

I'd like it to be 11" wide .

30" high(28" height.. is almost similar to LD V8 that's why i'd like it to be 30" tall.

26" long.

with pedestal i'd like it to be at least as tall as TX10 or taller than tx10:)(i like Tall case smile.gif with at least 25" long)

kind regard
post #63 of 334
if there will be space at the bottom for a radiator i would very much prefer for it to be mounted similar to TJ07 case, where you can have it in the push/pull config sucking the air in from one side and blowing it out through the other side (both panels should have vents, even the panels with the windows). Would really like to make sure the heat does not get dumped back into the case. I mean a $170 podium is nice for that purpose, but a bit pricey. smile.gif
Also, hoping the pricing will be right on this one. I am definitely interested in one, but i would think that a single wide case would be cheaper than a double wide.

Very nice work so far though, your cases seem great!
post #64 of 334
Thread Starter 
Quote:
Originally Posted by MaxT;14873453 
if there will be space at the bottom for a radiator i would very much prefer for it to be mounted similar to TJ07 case, where you can have it in the push/pull config sucking the air in from one side and blowing it out through the other side (both panels should have vents, even the panels with the windows). Would really like to make sure the heat does not get dumped back into the case. I mean a $170 podium is nice for that purpose, but a bit pricey. smile.gif
Also, hoping the pricing will be right on this one. I am definitely interested in one, but i would think that a single wide case would be cheaper than a double wide.

Very nice work so far though, your cases seem great!

Thank you. smile.gif The STH10 will have isolated chambers at the top & bottom of the case (still sorting out the details on that). It will be a massive case in it's own right, so expect pricing to be similar to the TH10 (it's actually 4" taller than the TH10). It's primary competitor will probably be the LD V8 and the STH10 will cost about $200 less (in the US), be larger, and arguably more customizable with more cooling capacity.

Best regards
Zeus (X99)
(15 items)
 
Green Hornet
(16 items)
 
Toxic
(8 items)
 
CPUMotherboardGraphicsRAM
Intel I7-5930K EVGA X99 Classified EVGA SC GTX980Ti x 3 Crucial Ballistix 2400 MHz DDR4 (64GB) 
Hard DriveHard DriveOptical DriveCooling
Samsung PCI M.2 (512GB) Seagate Enterprise HDD (4TB x 8) LG Blu-ray EK Blocks, Pumps and rervoirs 
CoolingCoolingMonitorPower
Hardware Labs GTX 480 Hardware Labs GTX 560 Dell U3011 30" IPS Display x 2 EVGA 1600 Watt 
CaseOtherOther
CaseLabs SMA8 LSI RAID Controller Software: Solidworks, Cinema4D, Octane Render, ... 
CPUMotherboardGraphicsRAM
Intel I7-6700K ASUS Maximus Gene VIII mATX Gigabyte GeForce GTX1070 Mini Crucual Ballistix 2400MHz DDR (64 GB) 
Hard DriveHard DriveHard DriveHard Drive
Samsung V-NAND 950 Pro SSD - 256GB Samsung 850 EVO 1TB SSD (RAID 1) Samsung 850 EVO 1TB SSD (RAID 1) Seagate 2TB Enterprise HDD 
CoolingCoolingOSMonitor
Noctua NH-D9L Low Profile CPU Cooler Gelid Solutions WING 12 UV 120mm Case Fan (2X) Windows 10 Pro ACER Curved 34" Ultrawide 21:9 
PowerCaseOtherOther
Silverstone 600 SFX GOLD Modular PSU CaseLabs Bullet BH4 (Lime) MOD-ONE Black Double-G Case Feet Darkside UV LED Case Lighting 
CPUMotherboardGraphicsRAM
Intel I7-4770K ASUS Maximus VI Impact EVGA Titan GSkill 16 GB DDR3-1600 
Hard DriveCoolingOSCase
Samsung SSD 512MB 840 x 2 (RAID 0) EK Blocks, 280 x 60mm (2)  Windows 8.1 Pro 64 Bit CaseLabs Mercury S3 & Pedestal 
  hide details  
Reply
Zeus (X99)
(15 items)
 
Green Hornet
(16 items)
 
Toxic
(8 items)
 
CPUMotherboardGraphicsRAM
Intel I7-5930K EVGA X99 Classified EVGA SC GTX980Ti x 3 Crucial Ballistix 2400 MHz DDR4 (64GB) 
Hard DriveHard DriveOptical DriveCooling
Samsung PCI M.2 (512GB) Seagate Enterprise HDD (4TB x 8) LG Blu-ray EK Blocks, Pumps and rervoirs 
CoolingCoolingMonitorPower
Hardware Labs GTX 480 Hardware Labs GTX 560 Dell U3011 30" IPS Display x 2 EVGA 1600 Watt 
CaseOtherOther
CaseLabs SMA8 LSI RAID Controller Software: Solidworks, Cinema4D, Octane Render, ... 
CPUMotherboardGraphicsRAM
Intel I7-6700K ASUS Maximus Gene VIII mATX Gigabyte GeForce GTX1070 Mini Crucual Ballistix 2400MHz DDR (64 GB) 
Hard DriveHard DriveHard DriveHard Drive
Samsung V-NAND 950 Pro SSD - 256GB Samsung 850 EVO 1TB SSD (RAID 1) Samsung 850 EVO 1TB SSD (RAID 1) Seagate 2TB Enterprise HDD 
CoolingCoolingOSMonitor
Noctua NH-D9L Low Profile CPU Cooler Gelid Solutions WING 12 UV 120mm Case Fan (2X) Windows 10 Pro ACER Curved 34" Ultrawide 21:9 
PowerCaseOtherOther
Silverstone 600 SFX GOLD Modular PSU CaseLabs Bullet BH4 (Lime) MOD-ONE Black Double-G Case Feet Darkside UV LED Case Lighting 
CPUMotherboardGraphicsRAM
Intel I7-4770K ASUS Maximus VI Impact EVGA Titan GSkill 16 GB DDR3-1600 
Hard DriveCoolingOSCase
Samsung SSD 512MB 840 x 2 (RAID 0) EK Blocks, 280 x 60mm (2)  Windows 8.1 Pro 64 Bit CaseLabs Mercury S3 & Pedestal 
  hide details  
Reply
post #65 of 334
Man, watercooling just seems overrated tongue.gif
post #66 of 334
Quote:
Originally Posted by Case Labs;14873651 
Thank you. smile.gif The STH10 will have isolated chambers at the top & bottom of the case (still sorting out the details on that). It will be a massive case in it's own right, so expect pricing to be similar to the TH10 (it's actually 4" taller than the TH10). It's primary competitor will probably be the LD V8 and the STH10 will cost about $200 less (in the US), be larger, and arguably more customizable with more cooling capacity.

Best regards

Hi, Jim, is that right the case itself 29" tall, and will there be an external pedestal for this case ? ( that means the case + pedestal can be somewhere around 35" tall). I prefer this case + pedestal to be as tall as TX10:D.
I prefer the external pedestal that is to be attached seperately.( personally i dont like the case itself include the pedestal )

Kind regards
post #67 of 334
Yeah, so can I just get the middle and bottom chamber? Saw off the top so I can actually stick one of these under my desk. tongue.gif
Sierpinski
(9 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-6500 Gigabyte H170-WiFi Radeon Nano 2x8GB Corsair Vengeance LPX DDR4-3000 Memory 
Hard DriveCoolingOSPower
Samsung 950 Pro Cryorig C7 Windows 10 Pro Silverstone Strider Gold 450W Fully Modular 
Case
Fractal Design Node 202 
  hide details  
Reply
Sierpinski
(9 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5-6500 Gigabyte H170-WiFi Radeon Nano 2x8GB Corsair Vengeance LPX DDR4-3000 Memory 
Hard DriveCoolingOSPower
Samsung 950 Pro Cryorig C7 Windows 10 Pro Silverstone Strider Gold 450W Fully Modular 
Case
Fractal Design Node 202 
  hide details  
Reply
post #68 of 334
Quote:
Originally Posted by Case Labs;14475103 
We're just setting the requirements now. A prototype won't be available until at least mid September.

Best regards

It's mid september. wink.gif So want to see this thing!! smile.gif
Some pictures would be good to go with that brand new website that was supposed to be finished by mid semptember poke.gifbiggrin.gif:D:D

Just kidding. I know you guys are busy!

By the way, at this point USB 3.0 would be a must, at least as an optional panel. I am thinking internal headers too, for the upcoming Intel ivy bridge refresh.
post #69 of 334
Quote:
Originally Posted by Case Labs;14873651 
Thank you. smile.gif The STH10 will have isolated chambers at the top & bottom of the case (still sorting out the details on that). It will be a massive case in it's own right, so expect pricing to be similar to the TH10 (it's actually 4" taller than the TH10). It's primary competitor will probably be the LD V8 and the STH10 will cost about $200 less (in the US), be larger, and arguably more customizable with more cooling capacity.

Best regards

Will there also be space for pump(s) in the basement as well as the rad or do we have to fit them elsewhere?
Daily Bench Rig
(23 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Processor 4770k Z87X-OC Force-CF AMD Radeon HD 7970 AMD Radeon HD 7970 
RAMHard DriveHard DriveHard Drive
dominator gt Samsung 840 EVO Samsung 840 EVO Samsung F3 
Optical DriveCoolingCoolingCooling
DVD burner XSPC Raystorm RX360 D5 
CoolingCoolingOSMonitor
Alphacool Repack D5 Kingpin CPU pot Windows 7 Dell U2211 
MonitorKeyboardPowerCase
40" Samsung 1080P 120hz 15 years old mechanical AX-1200 HAF 932 
MouseMouse PadAudio
Deathadder 2013 Pyrrhus Creative Soundblaster Z 
  hide details  
Reply
Daily Bench Rig
(23 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Processor 4770k Z87X-OC Force-CF AMD Radeon HD 7970 AMD Radeon HD 7970 
RAMHard DriveHard DriveHard Drive
dominator gt Samsung 840 EVO Samsung 840 EVO Samsung F3 
Optical DriveCoolingCoolingCooling
DVD burner XSPC Raystorm RX360 D5 
CoolingCoolingOSMonitor
Alphacool Repack D5 Kingpin CPU pot Windows 7 Dell U2211 
MonitorKeyboardPowerCase
40" Samsung 1080P 120hz 15 years old mechanical AX-1200 HAF 932 
MouseMouse PadAudio
Deathadder 2013 Pyrrhus Creative Soundblaster Z 
  hide details  
Reply
post #70 of 334
Quote:
Originally Posted by iconsam;14856353 
Make it Flat Packable. If not it is hard for us International to get it.

Agreed. Would cut down on shipping costs aswell.
The Conqueror
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 930 EVGA x58 Classified 3xSLI 2x Sapphire Radeon 5870 V2 Corsair Dominator PC12800 DDR3, 12GB 
Hard DriveOSMonitorKeyboard
Intel X25-M SSD Windows 7 Ultimate 3x 24" BenQ, 1x42" LG Logitech G 15 
PowerCaseMouseMouse Pad
Silverstone ST1500 LittleDevil V8 MX 518 Steelseries 
  hide details  
Reply
The Conqueror
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 930 EVGA x58 Classified 3xSLI 2x Sapphire Radeon 5870 V2 Corsair Dominator PC12800 DDR3, 12GB 
Hard DriveOSMonitorKeyboard
Intel X25-M SSD Windows 7 Ultimate 3x 24" BenQ, 1x42" LG Logitech G 15 
PowerCaseMouseMouse Pad
Silverstone ST1500 LittleDevil V8 MX 518 Steelseries 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Labs
Overclock.net › Forums › Hardware Vendors › Case Labs › Single Wide Case - Feedback Wanted