Overclock.net › Forums › Cooling › Water Cooling › How to power 2 PMP-450s?
New Posts  All Forums:Forum Nav:

How to power 2 PMP-450s?

post #1 of 13
Thread Starter 
What slot should I use to power 2 KOOLANCE PMP-450s? I have no idea what a 12volt rail is
post #2 of 13
Plug them straight into your molex connectors from the power supply dude
    
CPUMotherboardGraphicsRAM
[Intel] i7 2600k | 4.8Ghz HT 24/7 [Gigabyte] P67A-UD7-B3  [AMD] Radeon HD6990  [Samsung] 16GB 30nm 1866mhz 
Hard DriveCoolingOSMonitor
[G Skill] Pheonix Pro 60G SSD - Boot | 2TB Sams... Custom EKWB | XSPC | Swiftec | Primochill | Bit... [Windows7] Professional x64 [Acheiva] Shimian ISP-I 1440p 
KeyboardPowerCaseMouse
[CoolerMaster] Storm TK MX-Brown [Corsair] HX1000 | MDPC Sleeved [Silverstone] Modified Temjin TJ07 [Razer] DeathAdder 
Mouse PadAudioOther
Steelseries QCK [Asus] Xonar DG Sennheiser HD558 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
[Intel] i7 2600k | 4.8Ghz HT 24/7 [Gigabyte] P67A-UD7-B3  [AMD] Radeon HD6990  [Samsung] 16GB 30nm 1866mhz 
Hard DriveCoolingOSMonitor
[G Skill] Pheonix Pro 60G SSD - Boot | 2TB Sams... Custom EKWB | XSPC | Swiftec | Primochill | Bit... [Windows7] Professional x64 [Acheiva] Shimian ISP-I 1440p 
KeyboardPowerCaseMouse
[CoolerMaster] Storm TK MX-Brown [Corsair] HX1000 | MDPC Sleeved [Silverstone] Modified Temjin TJ07 [Razer] DeathAdder 
Mouse PadAudioOther
Steelseries QCK [Asus] Xonar DG Sennheiser HD558 
  hide details  
Reply
post #3 of 13
Thread Starter 
Which ones? I have 12v1, 12v3, 12v4. Should it be on the same line as the hard drives?
post #4 of 13
Any spare molex plugs you have availabe shud be fine, the pump will only run on 12v. what PSU do you have?
    
CPUMotherboardGraphicsRAM
[Intel] i7 2600k | 4.8Ghz HT 24/7 [Gigabyte] P67A-UD7-B3  [AMD] Radeon HD6990  [Samsung] 16GB 30nm 1866mhz 
Hard DriveCoolingOSMonitor
[G Skill] Pheonix Pro 60G SSD - Boot | 2TB Sams... Custom EKWB | XSPC | Swiftec | Primochill | Bit... [Windows7] Professional x64 [Acheiva] Shimian ISP-I 1440p 
KeyboardPowerCaseMouse
[CoolerMaster] Storm TK MX-Brown [Corsair] HX1000 | MDPC Sleeved [Silverstone] Modified Temjin TJ07 [Razer] DeathAdder 
Mouse PadAudioOther
Steelseries QCK [Asus] Xonar DG Sennheiser HD558 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
[Intel] i7 2600k | 4.8Ghz HT 24/7 [Gigabyte] P67A-UD7-B3  [AMD] Radeon HD6990  [Samsung] 16GB 30nm 1866mhz 
Hard DriveCoolingOSMonitor
[G Skill] Pheonix Pro 60G SSD - Boot | 2TB Sams... Custom EKWB | XSPC | Swiftec | Primochill | Bit... [Windows7] Professional x64 [Acheiva] Shimian ISP-I 1440p 
KeyboardPowerCaseMouse
[CoolerMaster] Storm TK MX-Brown [Corsair] HX1000 | MDPC Sleeved [Silverstone] Modified Temjin TJ07 [Razer] DeathAdder 
Mouse PadAudioOther
Steelseries QCK [Asus] Xonar DG Sennheiser HD558 
  hide details  
Reply
post #5 of 13
note; 450s is 24v
you need this little guy
http://www.koolance.com/water-coolin...roduct_id=1040
http://martinsliquidlab.org/2011/03/...5-strong-pump/
Edited by coolhandluke41 - 7/20/11 at 6:00pm
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
post #6 of 13
Quote:
Originally Posted by coolhandluke41 View Post
I just have mine off a normal molex running at 12v. The little sucker can run at 24v tho, but I'm not sure the OP needs that.
    
CPUMotherboardGraphicsRAM
[Intel] i7 2600k | 4.8Ghz HT 24/7 [Gigabyte] P67A-UD7-B3  [AMD] Radeon HD6990  [Samsung] 16GB 30nm 1866mhz 
Hard DriveCoolingOSMonitor
[G Skill] Pheonix Pro 60G SSD - Boot | 2TB Sams... Custom EKWB | XSPC | Swiftec | Primochill | Bit... [Windows7] Professional x64 [Acheiva] Shimian ISP-I 1440p 
KeyboardPowerCaseMouse
[CoolerMaster] Storm TK MX-Brown [Corsair] HX1000 | MDPC Sleeved [Silverstone] Modified Temjin TJ07 [Razer] DeathAdder 
Mouse PadAudioOther
Steelseries QCK [Asus] Xonar DG Sennheiser HD558 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
[Intel] i7 2600k | 4.8Ghz HT 24/7 [Gigabyte] P67A-UD7-B3  [AMD] Radeon HD6990  [Samsung] 16GB 30nm 1866mhz 
Hard DriveCoolingOSMonitor
[G Skill] Pheonix Pro 60G SSD - Boot | 2TB Sams... Custom EKWB | XSPC | Swiftec | Primochill | Bit... [Windows7] Professional x64 [Acheiva] Shimian ISP-I 1440p 
KeyboardPowerCaseMouse
[CoolerMaster] Storm TK MX-Brown [Corsair] HX1000 | MDPC Sleeved [Silverstone] Modified Temjin TJ07 [Razer] DeathAdder 
Mouse PadAudioOther
Steelseries QCK [Asus] Xonar DG Sennheiser HD558 
  hide details  
Reply
post #7 of 13
Thread Starter 
I have a thermaltake toughpower 1200w. Ok I have a couple open plugs on the DVD drive, hard disk cable. I thought the 12v4 stood for twelve volts at 4amps. The pumps diddnt come with any spec sheet
post #8 of 13
I would think this is the main reason he wants 450 S,how's the vibration on this pump ?
One of the members was running two of them in series ..he couldn't stand the vibration
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
post #9 of 13
Thread Starter 
So it takes 24volts. For 2 pumps or one? I have 2 pumps, 2 gtx 580s HC2 and an i7 950. I can't believe I'm going to have to order more stuff. I was hoping to get this up and going tonight.

So you have yours running at 12v? Is it bad for the pumps? Do you have a dedicated power cable or does the cable have a cd drive or anything else on it?
post #10 of 13
12v is fine for running the pumps, you only need 24v if you felt you needed more flow, the 450S is very verty good even at 12v. Dont forget you would need to buy the 24v pump controller if you wanted to tho, I doubt you'd need it tho.

With two of them together, thats some serious pumping power and excellent for redundancy in case one fails.

But like Luke says, it could get annoying at 24v with the noise and vibrations. You really need to mount it properly with vibration damper material. The pumps dont come with the rubber pad that swiftec provide.

TBH with 2 GPU and a CPU block, just 1 450S at 12v is enough.

My pump is running dedicated, my PSU is modular.
    
CPUMotherboardGraphicsRAM
[Intel] i7 2600k | 4.8Ghz HT 24/7 [Gigabyte] P67A-UD7-B3  [AMD] Radeon HD6990  [Samsung] 16GB 30nm 1866mhz 
Hard DriveCoolingOSMonitor
[G Skill] Pheonix Pro 60G SSD - Boot | 2TB Sams... Custom EKWB | XSPC | Swiftec | Primochill | Bit... [Windows7] Professional x64 [Acheiva] Shimian ISP-I 1440p 
KeyboardPowerCaseMouse
[CoolerMaster] Storm TK MX-Brown [Corsair] HX1000 | MDPC Sleeved [Silverstone] Modified Temjin TJ07 [Razer] DeathAdder 
Mouse PadAudioOther
Steelseries QCK [Asus] Xonar DG Sennheiser HD558 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
[Intel] i7 2600k | 4.8Ghz HT 24/7 [Gigabyte] P67A-UD7-B3  [AMD] Radeon HD6990  [Samsung] 16GB 30nm 1866mhz 
Hard DriveCoolingOSMonitor
[G Skill] Pheonix Pro 60G SSD - Boot | 2TB Sams... Custom EKWB | XSPC | Swiftec | Primochill | Bit... [Windows7] Professional x64 [Acheiva] Shimian ISP-I 1440p 
KeyboardPowerCaseMouse
[CoolerMaster] Storm TK MX-Brown [Corsair] HX1000 | MDPC Sleeved [Silverstone] Modified Temjin TJ07 [Razer] DeathAdder 
Mouse PadAudioOther
Steelseries QCK [Asus] Xonar DG Sennheiser HD558 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › How to power 2 PMP-450s?