Overclock.net › Forums › Intel › Intel CPUs › Intel Core I7 2600K - BSOD after 1 month of stability
New Posts  All Forums:Forum Nav:

Intel Core I7 2600K - BSOD after 1 month of stability

post #1 of 53
Thread Starter 
Hey forum!

Alright I have abit of a problem here. After having a stable overclock for over a month I have gotten alot of BSOD's lately.

The problem just randomly started appering the last two weeks and it has gotten worse. When I overclocked my CPU I did Prime95 and Memtest86 for stability and played my games and such and then later finally found a good spot.

After I found my good spot wich was 1.34V idle and 1.38V load everything was rock solid for over a month, but yesterday I looked at HWMonitor and it had suddenly jumped to 1.4V wich it has never done when I tested it for stability a long time ago.

And what's also very strange is that when I tested my overclock a month ago I could not go below 1.34V without getting a BSOD but when I lowerd it yesterday it was fine wich is really odd.

The BSOD is the typical code 124 for Vcore but it should not happen if it has been stable for so long.

Any tip on what the issue could be?

Many Regards


Edited by Kentan900 - 7/22/11 at 7:59am
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
post #2 of 53
How many hours of Prime95 did you run? Also did you run it in blend? I'm guessing if you didn't run it for more than 15 hours then you're most likely not stable - my suggestion is to set it at 1.4v which should work perfectly for you.
The Laptop
(6 items)
 
  
CPUGraphicsRAMHard Drive
Intel i7 2860QM AMD Radeon HD 6770M Corsair Vengence 1600MHz Samsung 840 Pro 256GB 
OSMonitor
Mac OS X 10.8 1680 x 1050 anti-glare high resolution  
  hide details  
Reply
The Laptop
(6 items)
 
  
CPUGraphicsRAMHard Drive
Intel i7 2860QM AMD Radeon HD 6770M Corsair Vengence 1600MHz Samsung 840 Pro 256GB 
OSMonitor
Mac OS X 10.8 1680 x 1050 anti-glare high resolution  
  hide details  
Reply
post #3 of 53
How can it bsod after one month of being stable? It clearly wasn't stable in the first place. Ram is the likely suspect, feed it some more volts
post #4 of 53
Quote:
Originally Posted by Rowey View Post
How can it bsod after one month of being stable? It clearly wasn't stable in the first place. Ram is the likely suspect, feed it some more volts
Sure it can, its possible. It wouldn't be the first 2500k/2600k that has shown some minor degradation at over 1.4v.

I am not saying that is necessarily the problem here though.


Your BCLK over 100.0 ?

I had it at like 101 for a while and that was random 124 bsod left and right.
    
CPUMotherboardGraphicsRAM
5960x @ 4.4ghz (1.19v) evga x99 micro2 (2) evga gtx 980 ti hybrid 32gb hyperx 2666mhz 
Hard DriveCoolingOSMonitor
samsung 950 pro 512gb NVMe M.2 ssd ek everything win 10 xl2430t / u2515h (x2) / u2913wm 
KeyboardPowerCaseMouse
cm novatouch w/ pbt caps. evga 1200 p2 lian li pc-9f nixeus revel 
Mouse PadAudioOther
steelseries qck heavy gustard U12/X12 -> H10/Lyr presonus 22vsl > mxl770 (mic) 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
5960x @ 4.4ghz (1.19v) evga x99 micro2 (2) evga gtx 980 ti hybrid 32gb hyperx 2666mhz 
Hard DriveCoolingOSMonitor
samsung 950 pro 512gb NVMe M.2 ssd ek everything win 10 xl2430t / u2515h (x2) / u2913wm 
KeyboardPowerCaseMouse
cm novatouch w/ pbt caps. evga 1200 p2 lian li pc-9f nixeus revel 
Mouse PadAudioOther
steelseries qck heavy gustard U12/X12 -> H10/Lyr presonus 22vsl > mxl770 (mic) 
  hide details  
Reply
post #5 of 53
Thread Starter 
Im going to run Memtest86 for a while to see if it's the memory thats cousing it.
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
post #6 of 53
How many hours of prime blend did you run to test for stability??
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #7 of 53
Might need a little extra voltage on the I/O and/or System Agent. Core voltage isn't the only thing to allow a stable overclock.
    
CPUMotherboardGraphicsRAM
Intel Core i5 4690K MSI Z97 Mpower MSI GTX 770 Lightning Mushkin Blackline 2x8GB DDR3-2400 
Hard DriveOptical DriveCoolingOS
840 Pro 128GB + WD 640GB Black + WD 1TB Black +... Samsung SH-S203N DVD-RW Phanteks PH-TC14PE_BK w/ 2x SP120's Windows 7 Professional x64 
MonitorKeyboardPowerCase
ASUS VE258Q 25" LED Corsair K70 RGB (Cherry MX Red's) Corsair HX750 Silverstone TJ04-E w/ Window 
MouseMouse PadAudioAudio
Logitech G5 v1 X-ray Thunder 9 smooth ASUS Xonar Essence STX Numark NPM5's + Dayton SUB-1200 12" sub 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i5 4690K MSI Z97 Mpower MSI GTX 770 Lightning Mushkin Blackline 2x8GB DDR3-2400 
Hard DriveOptical DriveCoolingOS
840 Pro 128GB + WD 640GB Black + WD 1TB Black +... Samsung SH-S203N DVD-RW Phanteks PH-TC14PE_BK w/ 2x SP120's Windows 7 Professional x64 
MonitorKeyboardPowerCase
ASUS VE258Q 25" LED Corsair K70 RGB (Cherry MX Red's) Corsair HX750 Silverstone TJ04-E w/ Window 
MouseMouse PadAudioAudio
Logitech G5 v1 X-ray Thunder 9 smooth ASUS Xonar Essence STX Numark NPM5's + Dayton SUB-1200 12" sub 
  hide details  
Reply
post #8 of 53
Thread Starter 
Alright after trying Memtest86 for a very long time it didnt come up with any errors at all.

I have even tried bumping up the vcore alot more and it still gives me random BSOD's.
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
post #9 of 53
Thread Starter 
I added some pictures aswell! I hope it helps!
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
post #10 of 53
Thread Starter 
No one?
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Intel Core I7 2600K - BSOD after 1 month of stability