Overclock.net › Forums › Intel › Intel Motherboards › i7 2600k w/ maximus iv extreme - multiplier problem
New Posts  All Forums:Forum Nav:

i7 2600k w/ maximus iv extreme - multiplier problem

post #1 of 13
Thread Starter 
Hi, I recently finished my build and went straight into OCing to 4.8 per a guide on this forum by you and after I follow the guide to the end, I reboot and went into windows itself. To confirm the OC, I used the ROG - CPUID and saw that the processor is still running at stock 3.4ghz. Another thing, hyper-threading is enabled but CPUID shows 4 instead of 8 threads and cores shows 2 instead of 4. In task manager, there's only 4 instead of 8 processors running here's the link that I used and I followed the quick OC guide

http://www.asusrog.com/forums/showth...clocking-Guide

My setup as follows

i7 2600k
Maximus IV extreme B3 revision / Bios 1409
Matrix Platinum gtx 580 OC to 925ghz / 1.150v
Corsair XMS 3 4x4gb 1600C9
H70 cooler

Thanks, Max
post #2 of 13
That's not a multiplier problem, go into your bios and find "Active Processor Cores" and make sure that it's set to "All".

I'm not familiar with the bios on the M4E so I can't help you very much with where it's at, but it should be under something along the lines of Advanced and then CPU configuration.
Meh >.<
(18 items)
 
For Sale: Two Ultra Kaze 3k RPM
$15 (USD)
For Sale: US Cellular blackberry 8530
$35 (USD) or best offer
CPUMotherboardGraphicsRAM
2500k Asus P67 Sabertooth XFX 7870 Black Edition Samsung Low profile 
Hard DriveHard DriveHard DriveHard Drive
OCZ Agility 3  Seagate ST3500410AS Seagate ST3750528AS Seagate ST3750640NS 
Hard DriveCoolingOSMonitor
Hitachi HTS545025B9A300 NZXT Havik 120 Windows 7 Home Premium X64 Samsung 27" P2770 
KeyboardPowerCaseMouse
Corsair K60 BFG 1000 Watt Open air tech bench M60 
  hide details  
Reply
Meh >.<
(18 items)
 
For Sale: Two Ultra Kaze 3k RPM
$15 (USD)
For Sale: US Cellular blackberry 8530
$35 (USD) or best offer
CPUMotherboardGraphicsRAM
2500k Asus P67 Sabertooth XFX 7870 Black Edition Samsung Low profile 
Hard DriveHard DriveHard DriveHard Drive
OCZ Agility 3  Seagate ST3500410AS Seagate ST3750528AS Seagate ST3750640NS 
Hard DriveCoolingOSMonitor
Hitachi HTS545025B9A300 NZXT Havik 120 Windows 7 Home Premium X64 Samsung 27" P2770 
KeyboardPowerCaseMouse
Corsair K60 BFG 1000 Watt Open air tech bench M60 
  hide details  
Reply
post #3 of 13
Make sure in the bios you are not disabling any cores. Inside Windows, press windows key + r and type MSCONFIG and press enter in the run prompt. Go to the boot tab, press advanced options, and make sure you are not being limited on cores there either.
Eff You Intel
(14 items)
 
FreeNAS
(9 items)
 
Beast
(14 items)
 
CPUMotherboardGraphicsRAM
AMD Ryzen 7 1700X AsRock X370 Taichi Sapphire R9 Fury Tri-X OC F4-3200C14D-32GTZR 
Hard DriveOptical DriveCoolingOS
Plextor M8Se(G) 1TB People still use these? lol Cryorig H7 Winblows 10 Professional X64 
MonitorKeyboardPowerCase
Pixio PX277 Logitech G510 Seasonic SS-860XP2 Fractal Design Define C TG 
MouseMouse Pad
Logitech G500 Xtrac Ripper 
CPUMotherboardGraphicsRAM
Intel Xeon E3-1245 v5 SuperMicro X11SSM-F-O C236 Integrated 2 x 16GB Kingston ValueRAM ECC KVR21E15D8/16 
Hard DriveCoolingOSPower
5 x 8TB Seagate IronWolf Pro in ZF2 Array CoolerMaster Hyper 212 Evo FreeNAS 11 EVGA SuperNOVA G2 550W Gold 
Case
Fractal Design Node 804 
CPUMotherboardGraphicsRAM
i7 4790k Asus Z97 Pro WIFI-AC Sapphire Nitro Radeon R9 Fury Tri-X OC+  G.Skill 4 x 8GB F3-2133C9D-16GXH 
Hard DriveOptical DriveCoolingOS
2 x Intel 730 480GB SSD in RAID 0 Asus DRW-24B1ST/BLK/B/AS Noctua NH-D15 Winblows 10 Pro x64 
MonitorKeyboardPowerCase
Pixio PX277 Logitech G510 Seasonic SS-660XP2 Fractal Design R4 Blackout 
MouseMouse Pad
Logitech G500 Xtrac Ripper 
  hide details  
Reply
Eff You Intel
(14 items)
 
FreeNAS
(9 items)
 
Beast
(14 items)
 
CPUMotherboardGraphicsRAM
AMD Ryzen 7 1700X AsRock X370 Taichi Sapphire R9 Fury Tri-X OC F4-3200C14D-32GTZR 
Hard DriveOptical DriveCoolingOS
Plextor M8Se(G) 1TB People still use these? lol Cryorig H7 Winblows 10 Professional X64 
MonitorKeyboardPowerCase
Pixio PX277 Logitech G510 Seasonic SS-860XP2 Fractal Design Define C TG 
MouseMouse Pad
Logitech G500 Xtrac Ripper 
CPUMotherboardGraphicsRAM
Intel Xeon E3-1245 v5 SuperMicro X11SSM-F-O C236 Integrated 2 x 16GB Kingston ValueRAM ECC KVR21E15D8/16 
Hard DriveCoolingOSPower
5 x 8TB Seagate IronWolf Pro in ZF2 Array CoolerMaster Hyper 212 Evo FreeNAS 11 EVGA SuperNOVA G2 550W Gold 
Case
Fractal Design Node 804 
CPUMotherboardGraphicsRAM
i7 4790k Asus Z97 Pro WIFI-AC Sapphire Nitro Radeon R9 Fury Tri-X OC+  G.Skill 4 x 8GB F3-2133C9D-16GXH 
Hard DriveOptical DriveCoolingOS
2 x Intel 730 480GB SSD in RAID 0 Asus DRW-24B1ST/BLK/B/AS Noctua NH-D15 Winblows 10 Pro x64 
MonitorKeyboardPowerCase
Pixio PX277 Logitech G510 Seasonic SS-660XP2 Fractal Design R4 Blackout 
MouseMouse Pad
Logitech G500 Xtrac Ripper 
  hide details  
Reply
post #4 of 13
your CPu will run at 3.4ghz idle and then if you apply load it should goto 4.8ghz, try disabling C1E, EIST, and C3/C6 states and try it then.
    
CPUMotherboardGraphicsRAM
Intel Core i9 7980XE X299E-ITX/ac GTX 1080 Ti FE G.Skill 3800MHz 4x8GB Quad Channel SO-DIMM Kit 
Hard DriveCoolingOSMonitor
512GB 960 Pro Bitspower AIO/ITX Full Cover Block Win 10 4K 37" 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i9 7980XE X299E-ITX/ac GTX 1080 Ti FE G.Skill 3800MHz 4x8GB Quad Channel SO-DIMM Kit 
Hard DriveCoolingOSMonitor
512GB 960 Pro Bitspower AIO/ITX Full Cover Block Win 10 4K 37" 
  hide details  
Reply
post #5 of 13
Thread Starter 
Quote:
Originally Posted by Crystal_Castles View Post
That's not a multiplier problem, go into your bios and find "Active Processor Cores" and make sure that it's set to "All".

I'm not familiar with the bios on the M4E so I can't help you very much with where it's at, but it should be under something along the lines of Advanced and then CPU configuration.
It is set to "All"
post #6 of 13
Thread Starter 
Quote:
Originally Posted by Dopamin3 View Post
Make sure in the bios you are not disabling any cores. Inside Windows, press windows key + r and type MSCONFIG and press enter in the run prompt. Go to the boot tab, press advanced options, and make sure you are not being limited on cores there either.
Under msconfig I already have it set to 4 processors.
post #7 of 13
Thread Starter 
Quote:
Originally Posted by Sin0822 View Post
your CPu will run at 3.4ghz idle and then if you apply load it should goto 4.8ghz, try disabling C1E, EIST, and C3/C6 states and try it then.
So you're saying that in at idle it will be at stock but will ramp up to the oc speed that I set it at with load right. And will cpu-z reflect the speed.
post #8 of 13
Thread Starter 
Quote:
Originally Posted by Crystal_Castles View Post
That's not a multiplier problem, go into your bios and find "Active Processor Cores" and make sure that it's set to "All".

I'm not familiar with the bios on the M4E so I can't help you very much with where it's at, but it should be under something along the lines of Advanced and then CPU configuration.
it is set to ALL.
post #9 of 13
Quote:
Originally Posted by foxone64 View Post
Under msconfig I already have it set to 4 processors.
There is your problem right there. Just leave the Number of processors unchecked.
Eff You Intel
(14 items)
 
FreeNAS
(9 items)
 
Beast
(14 items)
 
CPUMotherboardGraphicsRAM
AMD Ryzen 7 1700X AsRock X370 Taichi Sapphire R9 Fury Tri-X OC F4-3200C14D-32GTZR 
Hard DriveOptical DriveCoolingOS
Plextor M8Se(G) 1TB People still use these? lol Cryorig H7 Winblows 10 Professional X64 
MonitorKeyboardPowerCase
Pixio PX277 Logitech G510 Seasonic SS-860XP2 Fractal Design Define C TG 
MouseMouse Pad
Logitech G500 Xtrac Ripper 
CPUMotherboardGraphicsRAM
Intel Xeon E3-1245 v5 SuperMicro X11SSM-F-O C236 Integrated 2 x 16GB Kingston ValueRAM ECC KVR21E15D8/16 
Hard DriveCoolingOSPower
5 x 8TB Seagate IronWolf Pro in ZF2 Array CoolerMaster Hyper 212 Evo FreeNAS 11 EVGA SuperNOVA G2 550W Gold 
Case
Fractal Design Node 804 
CPUMotherboardGraphicsRAM
i7 4790k Asus Z97 Pro WIFI-AC Sapphire Nitro Radeon R9 Fury Tri-X OC+  G.Skill 4 x 8GB F3-2133C9D-16GXH 
Hard DriveOptical DriveCoolingOS
2 x Intel 730 480GB SSD in RAID 0 Asus DRW-24B1ST/BLK/B/AS Noctua NH-D15 Winblows 10 Pro x64 
MonitorKeyboardPowerCase
Pixio PX277 Logitech G510 Seasonic SS-660XP2 Fractal Design R4 Blackout 
MouseMouse Pad
Logitech G500 Xtrac Ripper 
  hide details  
Reply
Eff You Intel
(14 items)
 
FreeNAS
(9 items)
 
Beast
(14 items)
 
CPUMotherboardGraphicsRAM
AMD Ryzen 7 1700X AsRock X370 Taichi Sapphire R9 Fury Tri-X OC F4-3200C14D-32GTZR 
Hard DriveOptical DriveCoolingOS
Plextor M8Se(G) 1TB People still use these? lol Cryorig H7 Winblows 10 Professional X64 
MonitorKeyboardPowerCase
Pixio PX277 Logitech G510 Seasonic SS-860XP2 Fractal Design Define C TG 
MouseMouse Pad
Logitech G500 Xtrac Ripper 
CPUMotherboardGraphicsRAM
Intel Xeon E3-1245 v5 SuperMicro X11SSM-F-O C236 Integrated 2 x 16GB Kingston ValueRAM ECC KVR21E15D8/16 
Hard DriveCoolingOSPower
5 x 8TB Seagate IronWolf Pro in ZF2 Array CoolerMaster Hyper 212 Evo FreeNAS 11 EVGA SuperNOVA G2 550W Gold 
Case
Fractal Design Node 804 
CPUMotherboardGraphicsRAM
i7 4790k Asus Z97 Pro WIFI-AC Sapphire Nitro Radeon R9 Fury Tri-X OC+  G.Skill 4 x 8GB F3-2133C9D-16GXH 
Hard DriveOptical DriveCoolingOS
2 x Intel 730 480GB SSD in RAID 0 Asus DRW-24B1ST/BLK/B/AS Noctua NH-D15 Winblows 10 Pro x64 
MonitorKeyboardPowerCase
Pixio PX277 Logitech G510 Seasonic SS-660XP2 Fractal Design R4 Blackout 
MouseMouse Pad
Logitech G500 Xtrac Ripper 
  hide details  
Reply
post #10 of 13
Thread Starter 
Quote:
Originally Posted by Dopamin3 View Post
There is your problem right there. Just leave the Number of processors unchecked.
so leave it unchecked but select "4" in the drop down menu right..... Disabling C1E, EIST, and C3/C6 allowed the cpu to oc to my desired speed.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › i7 2600k w/ maximus iv extreme - multiplier problem