post #1 of 1
Thread Starter 
Hi guys, I just bought a new PC and want advice on bios settings I have chosen for my overclock.


My hardware consists of:
Motherboard - Gigabyte Z68UD4-B3
RAM - 8gb Corsair Vengeance 8-8-8-24 1600MHz (CMZ8GX3M2A1600C8)



I'm currently using the following settings:

[1] ADVANCED FREQUENCY SETTINGS

- CPU Clock Ratio45x
- PWM Frequency ControlAuto
- CPU Over-current ProtectionAuto
- Internal CPU PLL Overvoltage Enabled
- Real-Time Ratio Changes in OSEnabled
- CPU Cores EnabledAll
- CPU Enhanced Halt (C1E)Disabled
- C3/C6 State SupportDisabled
- CPU Thermal MonitorDisabled
- CPU EIST FunctionDisabled
- Bi-Directional PROCHOTDisabled

- BCLK/DMI/PEG Clock ControlDisabled


[2] ADVANCED MEMORY SETTINGS
- Extreme Memory Profile (XMP)Disabled
- System Memory Multiplier (SPD)16.00
- Performance EnhanceTurbo
- DRAM Timing SelectableQuick
- Channel InterleavingAuto
- Rank InterleavingAuto

- Channel A Timing Settings
**STANDARD SETTINGS**
- CAS Latency Time8
- tRCD8
- tRP 8
- tRAS24
**ADVANCED TIMING CONTROL**
- All options Auto
**MISC TIMING CONTROL**
- All options Auto


[3] ADVANCED VOLTAGE CONTROL
- Multi-Steps Load-LineLevel 4
- CPU Vcore1.350v
- QPI/Vtt Voltage1.100v
- All other optionsAuto



I've been hammering my CPU with Prime95 using these settings with coretemp registering a maximum temperature of 65deg C. I'm relatively new to the overclocking game so if any of you connoisseurs have any advice on any of these settings I'd really appreciate the help!


Cheers!
Edited by t3k - 7/22/11 at 4:07am