Overclock.net › Forums › Intel › Intel CPUs › Help me to overclock my i7 2600k to 5.0ghz
New Posts  All Forums:Forum Nav:

Help me to overclock my i7 2600k to 5.0ghz

post #1 of 36
Thread Starter 
hey guys.
i overclocked my i7 2600k to 4.5ghz with 1.3V and i want to overclock it more so if you can help me i will really appreciate that.
my goal is 5.0ghz

thats the bios settings that i currectly using for 4.5ghz:
Code:
Ai Tweaker:
-Ai Overclock Tuner: Manual
-BCLK/PEG Frequency: 100.0
-Turbo Ratio: By All Cores (Can Adjust in OS)
-By All Cores (Can Adjust in OS): 45
-Internal PLL Overvoltage: Enabled
-Memory Frequency: DDR3-1600MHz
-Memory bandwidth booster: Disabled
-EPU Power Saving Mode: Disabled
-DRAM Timing Control: Auto.
-CPU Power Management:
--CPU Ratio: 45
--Enhanced Intel SpeedStep Technology: Disabled
--Turbo Mode: Enabled

-Vcore pwm mode: extreme
vcore mos volt control: auto
-Load-line Calibration: Auto
-VRM Frequency: Manual
-Vrm fixed frequency mode: 350
-Vcore over current protection: 100
-Vrm Over temperature protection: Enabled
-Vdram switching frequency: Auto
-Vdram Full phase control: Auto
-Vdram over Current protection: Disabled
-Vccsa switching frequency: Auto
-Vccsa Full phase control: Auto
-Vccsa over Current protection: Disabled
-Vccio switching frequency: Auto
-Vccio Full phase control: Auto
-Vccio over Current protection: Disabled

-CPU Voltage: Manual Mode
-CPU Manual Voltage: 1.3V
Dram Voltage: 1.5
-Dram data ref voltage on cha: Auto
-Dram ctrl ref voltage on cha: Auto
-Dram data ref voltage on chb: Auto
-Dram ctrl ref voltage on chb: Auto
-VCCSA Voltage: Auto
-CPU PLL Voltage: Auto
-Pch voltage: Auto
-Pch rcc voltae: Auto
-Cpu spread spectrum-disabled



CPU Configuration:
-Intel Adaptive Thermal Monitor: Enabled
-Hyper-threading: Enabled
-Active Processor Cores: All
-Limit CPUID Maximum: Disabled
-Execute Disable Bit: Enabled
-Intel Virtualization Technology: Disabled
-Turbo Mode: Enabled
-CPU C1E: Disabled
-CPU C3 Report: Disabled
-CPU C6 Report: Disabled
-Package c state limit: No limit.

so what i gotta change for 5.0 ghz?
Edited by someonewhy - 7/22/11 at 8:39am
Beast
(16 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3930k Rampage IV Extreme GTX 980 4gb gigabyte g1 windforce SOC GTX 980 4gb gigabyte g1 windforce SOC 
RAMHard DriveHard DriveCooling
G.skill 4x8GB 32gb 2400mhz Samsung 840 Pro Series 256GB 2TB Samsung HD322HJ Swiftech H220X 
OSMonitorPowerCase
Windows 7 64 bit samsung s23a950d Seasonic 1250W Gold X-Series Corsair 900D 
  hide details  
Reply
Beast
(16 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3930k Rampage IV Extreme GTX 980 4gb gigabyte g1 windforce SOC GTX 980 4gb gigabyte g1 windforce SOC 
RAMHard DriveHard DriveCooling
G.skill 4x8GB 32gb 2400mhz Samsung 840 Pro Series 256GB 2TB Samsung HD322HJ Swiftech H220X 
OSMonitorPowerCase
Windows 7 64 bit samsung s23a950d Seasonic 1250W Gold X-Series Corsair 900D 
  hide details  
Reply
post #2 of 36
For one .. 1.3 might not be enough for 5 ghz.

Secondly, put load line calibration on extreme. (Leave your voltage alone first to see if it helps)
Stacker 810 V3 :)
(14 items)
 
  
CPUMotherboardGraphicsRAM
2600k 4.5 GHZ ASUS P8P67 WS REVOLUTION EVGA GTX 980  16gb G.skill Ripjaws 2400mhz 
Hard DriveOptical DriveCoolingOS
2x 64gb ADATA SSD RAID0 + 2x 4 TB spinners 2x Asus DVD+RW Swiftech Watercooling 360 rad mcp655 win 7 x64 Ubuntu x64 
MonitorKeyboardPowerCase
3x DELL S2740L 27'' IPS screens  Logitech G15 Corsair 1000 Watt Modular CM Stacker 810 
MouseMouse Pad
Logitech G9 OCZ Behemoth 
  hide details  
Reply
Stacker 810 V3 :)
(14 items)
 
  
CPUMotherboardGraphicsRAM
2600k 4.5 GHZ ASUS P8P67 WS REVOLUTION EVGA GTX 980  16gb G.skill Ripjaws 2400mhz 
Hard DriveOptical DriveCoolingOS
2x 64gb ADATA SSD RAID0 + 2x 4 TB spinners 2x Asus DVD+RW Swiftech Watercooling 360 rad mcp655 win 7 x64 Ubuntu x64 
MonitorKeyboardPowerCase
3x DELL S2740L 27'' IPS screens  Logitech G15 Corsair 1000 Watt Modular CM Stacker 810 
MouseMouse Pad
Logitech G9 OCZ Behemoth 
  hide details  
Reply
post #3 of 36
Thread Starter 
thats the bios settings that i currectly using for 4.5ghz.....
secondly by leaving the voltage you meant put it on auto and then change LLC to extreme?
Edited by someonewhy - 7/22/11 at 8:36am
Beast
(16 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3930k Rampage IV Extreme GTX 980 4gb gigabyte g1 windforce SOC GTX 980 4gb gigabyte g1 windforce SOC 
RAMHard DriveHard DriveCooling
G.skill 4x8GB 32gb 2400mhz Samsung 840 Pro Series 256GB 2TB Samsung HD322HJ Swiftech H220X 
OSMonitorPowerCase
Windows 7 64 bit samsung s23a950d Seasonic 1250W Gold X-Series Corsair 900D 
  hide details  
Reply
Beast
(16 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3930k Rampage IV Extreme GTX 980 4gb gigabyte g1 windforce SOC GTX 980 4gb gigabyte g1 windforce SOC 
RAMHard DriveHard DriveCooling
G.skill 4x8GB 32gb 2400mhz Samsung 840 Pro Series 256GB 2TB Samsung HD322HJ Swiftech H220X 
OSMonitorPowerCase
Windows 7 64 bit samsung s23a950d Seasonic 1250W Gold X-Series Corsair 900D 
  hide details  
Reply
post #4 of 36
For 5 GHz 1.3V is very low. If you have a good chip then you might need 1.4V.
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
post #5 of 36
Thread Starter 
Quote:
Originally Posted by Kentan900;14306836 
For 5 GHz 1.3V is very low. If you have a good chip then you might need 1.4V.

huh?are you guys serious?thats the bios settings that i use for 4.5ghz i asked what settings i gotta change for 5.0ghz.....
Beast
(16 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3930k Rampage IV Extreme GTX 980 4gb gigabyte g1 windforce SOC GTX 980 4gb gigabyte g1 windforce SOC 
RAMHard DriveHard DriveCooling
G.skill 4x8GB 32gb 2400mhz Samsung 840 Pro Series 256GB 2TB Samsung HD322HJ Swiftech H220X 
OSMonitorPowerCase
Windows 7 64 bit samsung s23a950d Seasonic 1250W Gold X-Series Corsair 900D 
  hide details  
Reply
Beast
(16 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3930k Rampage IV Extreme GTX 980 4gb gigabyte g1 windforce SOC GTX 980 4gb gigabyte g1 windforce SOC 
RAMHard DriveHard DriveCooling
G.skill 4x8GB 32gb 2400mhz Samsung 840 Pro Series 256GB 2TB Samsung HD322HJ Swiftech H220X 
OSMonitorPowerCase
Windows 7 64 bit samsung s23a950d Seasonic 1250W Gold X-Series Corsair 900D 
  hide details  
Reply
post #6 of 36
He's using 1,3 volts for 4,5 GHz, not 5 GHz. Sorry but I'm not a master overclocker. Basically, raise multi by 1 then raise voltage until it's stable and repeat :/
My Gaming Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500K @ 4,5GHz - 1.296 volts MSI P67A-GD55 Asus Strix Geforce GTX 970 4GB Mushkin Enhanced Silverline Stiletto 2x4GB 1333... 
Hard DriveHard DriveHard DriveHard Drive
Seagate Barracuda 7200.12 1TB Seagate Barracuda 7200.12 500GB Toshiba HDKPC08 3TB Samsung 840 Evo 120GB 
CoolingOSMonitorKeyboard
Corsair Hydro Series H60 Windows 8.1 Professional x64 BenQ G2420HD 24" 1920x1080 IBM Model M2 French Canadian Layout '93 
PowerCaseMouseMouse Pad
Mushkin Enhanced Joule 1000W Modular Antec DF-35 (Modded) Razer Deathadder 3500 DPI Mionix Sargas 900 
  hide details  
Reply
My Gaming Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500K @ 4,5GHz - 1.296 volts MSI P67A-GD55 Asus Strix Geforce GTX 970 4GB Mushkin Enhanced Silverline Stiletto 2x4GB 1333... 
Hard DriveHard DriveHard DriveHard Drive
Seagate Barracuda 7200.12 1TB Seagate Barracuda 7200.12 500GB Toshiba HDKPC08 3TB Samsung 840 Evo 120GB 
CoolingOSMonitorKeyboard
Corsair Hydro Series H60 Windows 8.1 Professional x64 BenQ G2420HD 24" 1920x1080 IBM Model M2 French Canadian Layout '93 
PowerCaseMouseMouse Pad
Mushkin Enhanced Joule 1000W Modular Antec DF-35 (Modded) Razer Deathadder 3500 DPI Mionix Sargas 900 
  hide details  
Reply
post #7 of 36
Quote:
Originally Posted by someonewhy;14306868 
huh?are you guys serious?thats the bios settings that i use for 4.5ghz i asked what settings i gotta change for 5.0ghz.....

My chip needs 1.38V for 4.6 GHz wich means it's one of the "normal" ones.

If you are using 1.3V for 4.5 GHz that's already a really good chip.

Bump up the multi and if it BSOD's then you need more vcore.
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
post #8 of 36
Quote:
Originally Posted by Snowmen;14306883 
He's using 1,3 volts for 4,5 GHz, not 5 GHz. Sorry but I'm not a master overclocker. Basically, raise multi by 1 then raise voltage until it's stable and repeat :/

I said that 1.3V won't work for 5 GHz.
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core I7 2600K 4.0 GHz 1.216V MSI P67A-GD65 (B3) Gigabyte GeForce GTX 580 1536MB 900/1800/2004 1.05 G.Skill Ripjaws 8GB (2 x 4GB) 1600MHz DDR3 CL9 
Hard DriveOptical DriveOSMonitor
WD 500 GB 7200RPM 32 Mbit Samsung I think. Windows 7 Ultimate 64 Bit BenQ 27" LCD M2700HD (1920 x 1080) 
KeyboardPowerCaseMouse
Tgt BenQ Standard PS/2 Corsair HX850W (80+ Silver Certified) Cooler Master HAF 932 Cyborg R.A.T. 3 
Mouse Pad
SteelSeries 
  hide details  
Reply
post #9 of 36
Just go for it. No one knows what will be your voltage to get to 5.0 until you try it.
BSOD is on your side. Just watch for the temp.
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
post #10 of 36
Thread Starter 
If i change the multi to 50 its automaticly goes to 5.0ghz...but how much voltage do i need and any other settings i gotta change besides cpu voltage?
Beast
(16 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3930k Rampage IV Extreme GTX 980 4gb gigabyte g1 windforce SOC GTX 980 4gb gigabyte g1 windforce SOC 
RAMHard DriveHard DriveCooling
G.skill 4x8GB 32gb 2400mhz Samsung 840 Pro Series 256GB 2TB Samsung HD322HJ Swiftech H220X 
OSMonitorPowerCase
Windows 7 64 bit samsung s23a950d Seasonic 1250W Gold X-Series Corsair 900D 
  hide details  
Reply
Beast
(16 items)
 
  
CPUMotherboardGraphicsGraphics
i7 3930k Rampage IV Extreme GTX 980 4gb gigabyte g1 windforce SOC GTX 980 4gb gigabyte g1 windforce SOC 
RAMHard DriveHard DriveCooling
G.skill 4x8GB 32gb 2400mhz Samsung 840 Pro Series 256GB 2TB Samsung HD322HJ Swiftech H220X 
OSMonitorPowerCase
Windows 7 64 bit samsung s23a950d Seasonic 1250W Gold X-Series Corsair 900D 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Help me to overclock my i7 2600k to 5.0ghz