Overclock.net › Forums › Cooling › Water Cooling › First Loop Order
New Posts  All Forums:Forum Nav:

First Loop Order

post #1 of 3
Thread Starter 
Whatda think? Good stuff?

Ordered Today 7/22:

XSPC Rasa 750 RS360 Universal CPU / Triple Radiator Water Cooling Kit
8 FT: PrimoChill PrimoFlex PRO LRT Tubing 1/2" ID x 3/4" OD with 1/8" Wall - UV Red
QTY 2: PrimoChill Anti-Kink Coils - 1/2 OD" Tubing - Black
QTY 8: Koolance 1/2" x 3/4" (13mm x 19mm) G1/4 Threaded Compression Nozzle - Black
QTY 1: Koolance QDC (High Flow) No-Spill Shutoff Nozzle, Male G1/4 Thread
QTY 1: Koolance QDC (High Flow) No-Spill Shutoff Nozzle, Female Compression
QTY 1: Bitspower G1/4" Matte Black T Adapter
FREE IandH KillCoil - Antimicrobial Silver

Received Today 7/22:

HAF 932 Case

Received 7/21:

QTY 6: Scythe Gentle Typhoon 120mm 1850 RPM Cooling Fans
post #2 of 3
Well, since you ordered already, I guess the advice I began to type out is irrelevant. I was just going to say 1) get a real pump/res combo, 2) skip the anti-kink coils, and 3) 1/2" x 3/4" tubing sucks. Looks like a good enough setup anyway. Just out of curiosity, how are you going to set up the QDC? Also, I assume the T-adapter is for a drain line, but don't see a stop/plug fitting.
post #3 of 3
Thread Starter 
Quote:
Originally Posted by t-ramp View Post
Well, since you ordered already, I guess the advice I began to type out is irrelevant. I was just going to say 1) get a real pump/res combo, 2) skip the anti-kink coils, and 3) 1/2" x 3/4" tubing sucks. Looks like a good enough setup anyway. Just out of curiosity, how are you going to set up the QDC? Also, I assume the T-adapter is for a drain line, but don't see a stop/plug fitting.
The idea was to save money. I've done a lot of research on the Rasa kits and for the price and my needs they will perform more than fine. I don't plan to WC my GPUs right now so it's just the CPU - nothing else.

I admit the kink coils are just for looks, but not sure why you think the tube size sucks, some people like the bigger sizes and some don't - unless you've got a specific reason in mind other than personal preference?

I plan to do the T-fitting for the drain, but at the bottom outlet I use the male G1/4 threaded quick-disconnect. So when I want to drain the loop I simply connect the female end to that, which will have a run of tube attached to it's compression fitting end. That way I don't have unnecessary strain on the loop or a bunch of tube to tuck somewhere.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › First Loop Order