Overclock.net › Forums › Intel › Intel CPUs › OC intel E8600 + P5Q deluxe + corsair dominator PC6400 4gb
New Posts  All Forums:Forum Nav:

OC intel E8600 + P5Q deluxe + corsair dominator PC6400 4gb - Page 2

post #11 of 60
Thread Starter 
OK I Tried:
450FSB x10 multi
NB: 1.3 V
FSB TERMINATION around 1.35v
BIOS says 4.52Ghz!
strange my post says DD2-901Mhz but its a 1066Mhz RAM 2 x 2 GB?

all other on auto, got BSOD!
gT Computer
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700K Asus Maximus Ranger VIII MSI GTX 980 TI  Corsair Vengeance LPX XMP 16GB DDR4-3000 CL15 
Hard DriveHard DriveHard DriveHard Drive
Samsung EVO 850 500GB WD RED 2TB WD Green 2TB WD GREEN 1TB 
Optical DriveOSMonitorKeyboard
1 x DVD Double-Layer Windows 10 Pro N x64 BenQ xl2720z Steelseries Apex 350 
PowerCaseMouseMouse Pad
Corsair RM1000i Thermaltake Armor+ Logitech G502 Steelseries Qck+ Pro 
  hide details  
Reply
gT Computer
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700K Asus Maximus Ranger VIII MSI GTX 980 TI  Corsair Vengeance LPX XMP 16GB DDR4-3000 CL15 
Hard DriveHard DriveHard DriveHard Drive
Samsung EVO 850 500GB WD RED 2TB WD Green 2TB WD GREEN 1TB 
Optical DriveOSMonitorKeyboard
1 x DVD Double-Layer Windows 10 Pro N x64 BenQ xl2720z Steelseries Apex 350 
PowerCaseMouseMouse Pad
Corsair RM1000i Thermaltake Armor+ Logitech G502 Steelseries Qck+ Pro 
  hide details  
Reply
post #12 of 60
lower CPU multi to 9x... You can worry about your RAM speed later, once you get CPU dialed in a bit more..
post #13 of 60
Thread Starter 
Quote:
Originally Posted by CL3P20 View Post
pushing latency under 55ns will require more NBv than 1.3v with 4GB's RAM.. *NBv dont correspond with FSB mhz.. only with- amount of RAM and latency.

*with everything on Auto.. your PL# [static tRead] is very loose..which is accounting for most of the latency in your systems RAM now. I would guess you are near 70ns with PL set to 10-12. For 450-500FSB you should be using PL# 8 or 9... which WILL need more NBv, as it should drop your latency down into the high 50ns range, assuming your running RAM at or above default speed..and not 1:1
dont get it at all, sorry (A) but where can is set it and what settings could i try? im now getting a BSOD read post above
gT Computer
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700K Asus Maximus Ranger VIII MSI GTX 980 TI  Corsair Vengeance LPX XMP 16GB DDR4-3000 CL15 
Hard DriveHard DriveHard DriveHard Drive
Samsung EVO 850 500GB WD RED 2TB WD Green 2TB WD GREEN 1TB 
Optical DriveOSMonitorKeyboard
1 x DVD Double-Layer Windows 10 Pro N x64 BenQ xl2720z Steelseries Apex 350 
PowerCaseMouseMouse Pad
Corsair RM1000i Thermaltake Armor+ Logitech G502 Steelseries Qck+ Pro 
  hide details  
Reply
gT Computer
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700K Asus Maximus Ranger VIII MSI GTX 980 TI  Corsair Vengeance LPX XMP 16GB DDR4-3000 CL15 
Hard DriveHard DriveHard DriveHard Drive
Samsung EVO 850 500GB WD RED 2TB WD Green 2TB WD GREEN 1TB 
Optical DriveOSMonitorKeyboard
1 x DVD Double-Layer Windows 10 Pro N x64 BenQ xl2720z Steelseries Apex 350 
PowerCaseMouseMouse Pad
Corsair RM1000i Thermaltake Armor+ Logitech G502 Steelseries Qck+ Pro 
  hide details  
Reply
post #14 of 60
Thread Starter 
dont ii have to change cpu (vcore voltage?) and what about the FSB Strap to North bridge ? i can choose between 200/266/333/400Mhz
Edited by IIIdefconIII - 7/23/11 at 11:26am
gT Computer
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700K Asus Maximus Ranger VIII MSI GTX 980 TI  Corsair Vengeance LPX XMP 16GB DDR4-3000 CL15 
Hard DriveHard DriveHard DriveHard Drive
Samsung EVO 850 500GB WD RED 2TB WD Green 2TB WD GREEN 1TB 
Optical DriveOSMonitorKeyboard
1 x DVD Double-Layer Windows 10 Pro N x64 BenQ xl2720z Steelseries Apex 350 
PowerCaseMouseMouse Pad
Corsair RM1000i Thermaltake Armor+ Logitech G502 Steelseries Qck+ Pro 
  hide details  
Reply
gT Computer
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700K Asus Maximus Ranger VIII MSI GTX 980 TI  Corsair Vengeance LPX XMP 16GB DDR4-3000 CL15 
Hard DriveHard DriveHard DriveHard Drive
Samsung EVO 850 500GB WD RED 2TB WD Green 2TB WD GREEN 1TB 
Optical DriveOSMonitorKeyboard
1 x DVD Double-Layer Windows 10 Pro N x64 BenQ xl2720z Steelseries Apex 350 
PowerCaseMouseMouse Pad
Corsair RM1000i Thermaltake Armor+ Logitech G502 Steelseries Qck+ Pro 
  hide details  
Reply
post #15 of 60
Thread Starter 
does anyone have msn? or other chat service
gT Computer
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700K Asus Maximus Ranger VIII MSI GTX 980 TI  Corsair Vengeance LPX XMP 16GB DDR4-3000 CL15 
Hard DriveHard DriveHard DriveHard Drive
Samsung EVO 850 500GB WD RED 2TB WD Green 2TB WD GREEN 1TB 
Optical DriveOSMonitorKeyboard
1 x DVD Double-Layer Windows 10 Pro N x64 BenQ xl2720z Steelseries Apex 350 
PowerCaseMouseMouse Pad
Corsair RM1000i Thermaltake Armor+ Logitech G502 Steelseries Qck+ Pro 
  hide details  
Reply
gT Computer
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700K Asus Maximus Ranger VIII MSI GTX 980 TI  Corsair Vengeance LPX XMP 16GB DDR4-3000 CL15 
Hard DriveHard DriveHard DriveHard Drive
Samsung EVO 850 500GB WD RED 2TB WD Green 2TB WD GREEN 1TB 
Optical DriveOSMonitorKeyboard
1 x DVD Double-Layer Windows 10 Pro N x64 BenQ xl2720z Steelseries Apex 350 
PowerCaseMouseMouse Pad
Corsair RM1000i Thermaltake Armor+ Logitech G502 Steelseries Qck+ Pro 
  hide details  
Reply
post #16 of 60
On P5Q Pro I ran 533MHz FSB x 7 on E6750 G0 24/7 stable with just 1.36V for NB and FSB..

A E8600 would need even less vFSB for 500MHz+ FSB..


Set strap to 333 and run RAM 1:1 with FSB and set Performance Level to 10..


CHEERS..
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
post #17 of 60
Thread Starter 
Quote:
Originally Posted by CL3P20 View Post
lower CPU multi to 9x... You can worry about your RAM speed later, once you get CPU dialed in a bit more..
450FSB x9 multi
NB: 1.3 V
FSB TERMINATION around 1.35v
BIOS says 4.07Ghz!
Computer boots, but 4.07 is very low for this type of proccesor
gT Computer
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700K Asus Maximus Ranger VIII MSI GTX 980 TI  Corsair Vengeance LPX XMP 16GB DDR4-3000 CL15 
Hard DriveHard DriveHard DriveHard Drive
Samsung EVO 850 500GB WD RED 2TB WD Green 2TB WD GREEN 1TB 
Optical DriveOSMonitorKeyboard
1 x DVD Double-Layer Windows 10 Pro N x64 BenQ xl2720z Steelseries Apex 350 
PowerCaseMouseMouse Pad
Corsair RM1000i Thermaltake Armor+ Logitech G502 Steelseries Qck+ Pro 
  hide details  
Reply
gT Computer
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700K Asus Maximus Ranger VIII MSI GTX 980 TI  Corsair Vengeance LPX XMP 16GB DDR4-3000 CL15 
Hard DriveHard DriveHard DriveHard Drive
Samsung EVO 850 500GB WD RED 2TB WD Green 2TB WD GREEN 1TB 
Optical DriveOSMonitorKeyboard
1 x DVD Double-Layer Windows 10 Pro N x64 BenQ xl2720z Steelseries Apex 350 
PowerCaseMouseMouse Pad
Corsair RM1000i Thermaltake Armor+ Logitech G502 Steelseries Qck+ Pro 
  hide details  
Reply
post #18 of 60
Thread Starter 
Quote:
Originally Posted by KingT View Post
On P5Q Pro I ran 533MHz FSB x 7 on E6750 G0 24/7 stable with just 1.36V for NB and FSB..

A E8600 would need even less vFSB for 500MHz+ FSB..


Set strap to 333 and run RAM 1:1 with FSB and set Performance Level to 10..


CHEERS..
Dont now how to get the 1:1 and what is means
gT Computer
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700K Asus Maximus Ranger VIII MSI GTX 980 TI  Corsair Vengeance LPX XMP 16GB DDR4-3000 CL15 
Hard DriveHard DriveHard DriveHard Drive
Samsung EVO 850 500GB WD RED 2TB WD Green 2TB WD GREEN 1TB 
Optical DriveOSMonitorKeyboard
1 x DVD Double-Layer Windows 10 Pro N x64 BenQ xl2720z Steelseries Apex 350 
PowerCaseMouseMouse Pad
Corsair RM1000i Thermaltake Armor+ Logitech G502 Steelseries Qck+ Pro 
  hide details  
Reply
gT Computer
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7-6700K Asus Maximus Ranger VIII MSI GTX 980 TI  Corsair Vengeance LPX XMP 16GB DDR4-3000 CL15 
Hard DriveHard DriveHard DriveHard Drive
Samsung EVO 850 500GB WD RED 2TB WD Green 2TB WD GREEN 1TB 
Optical DriveOSMonitorKeyboard
1 x DVD Double-Layer Windows 10 Pro N x64 BenQ xl2720z Steelseries Apex 350 
PowerCaseMouseMouse Pad
Corsair RM1000i Thermaltake Armor+ Logitech G502 Steelseries Qck+ Pro 
  hide details  
Reply
post #19 of 60
Use these 500MHz+ FSB settings and only play with Vcore, vNB, vFSB and CPU GTL, the rest use from the template:

FSB freq = 500MHz
DRAM TIMINGS=5-5-5-15 or by memory spec
STRAP=AUTO
DRAM freq= 1000MHz
DRAM STATIC READ CONTROL = DISABLED
DRAM READ TRAINING = DISABLED
OC charger=Enabled
AI Transaction booster=MANUAL
Performance Level = 10
CPU multiplier = 9x

Vcore=1.xxV (what Chip needs to hit 4.5GHz,add a bit if you crash,do not go over 1.40V and do not use AUTO setting)

CPU GTL = 0.63x on both lines
PLL=1.54V
FSB voltage=1.30V (and work from there but do not go over 1.40V)
DRAM voltage=2.1V (by memory specs)
NBv=1.36V (do not go over 1.40V)
SBv=1.2V
PCIE/SATA voltage=1.60V
NB GTL = AUTO
CPU & PCIE Spread spectrum=Disable
CPU & NB skew=AUTO
Load Line Calibration=ENABLED

All options in CPU Configuration set @ DISABLE and CPU MULTI @ 9x..

It seems that you need to tune your vFSB, vNB and CPU GTL voltages in order to make such high FSB Prime95 stable..

Do not just crank up those voltages,start from 1.3V for vFSB and 1.36V for vNB and go from there..

Also set CPU GTL at 0.63x..

If you fail in P95 just upp vFSB by 0.02V and test again..

If upping vFSB for a couple of times (up to 1.40V) doesn't help try with other settings for CPU GTL (0.61x and 0.65x)

If that doesn't help then try to upp vNB to 1.40V..

Also make sure that you have AI Transaction Booster @ MANUAL and Performance Level @ 10

The best is to use P95 Large FFT test as it stresses FSB really hard..

Also test your RAM for stability with memtest Windows version 4.0 until it reaches at least 100% on both instances (lounch two of them)..

Testing methodology:

1. First test OC with 6x multi with P95 LARGE FFT for at least 3h (12h is ideal) and stock Vcore as your CPU would be running @ 500MHz FSB x6=3GHz..

If you pass 12hrs P95 Large FFT then:

2. Reboot to BIOS upp your Vcore and set MULTI to 9x (or whatever you want)..

3. If it doesn't boot keep adding Vcore untill it does..

Then when it boots up:

4. Go in Windows test 500MHz FSB x9 multi =4.5GHz with 20 runs of IBT w/ max RAM and if you crash then just upp Vcore and test it again..

5. If you pass 12hrs of P95 LARGE FFT & IBT for 20 runs then you're ROCK SOLID..

KEEP YOUR CORE TEMPS UNDER 75C IN ANY STRESS TEST..

CHEERS..
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
post #20 of 60
*E8600 and same mobo... these settings were 100% stable..if you have issues applying them.. leave the RAM timings on 'Auto'

Quote:
JumperFree Configuration Settings
AI Overclock tuner: manual
CPU Ratio Setting: 9
FSB Strap to North Bridge: AUTO
FSB Frequency: 450
PCI-E Frequency: 101
DRAM Frequency:1081
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: AUTO

1st Information :

CAS# Latency: 5
DRAM RAS# to CAS# Delay: 5
DRAM RAS# Precharge: 5
DRAM RAS# Activate to Precharge: 15
RAS# to RAS# Delay : 4
Row Refresh Cycle Time: 55
Write Recovery Time: 6
Read to Precharge Time: 5

2nd Information :

READ to WRITE Delay (S/D): 10
Write to Read Delay (S): 5
WRITE to READ Delay (D): 6
READ to READ Delay (S): 7
READ to READ Delay (D): 7
WRITE to WRITE Delay (S): 6
WRITE to WRITE Delay (D): 6

3rd Information :

WRITE to PRE Delay: 14
READ to PRE Delay: 6
PRE to PRE Delay: 1
ALL PRE to ACT Delay: 6
ALL PRE to REF Delay: 6
DRAM Static Read Control: Disabled
DRAM Read Training: Disabled
MEM. OC Charger: Enabled
AI Clock Twister: Light
AI Transaction Booster: Manual
Common Performance Level [8]
Pull-In of CHA PH1: Enabled
Pull-In of CHA PH2: Enabled
Pull-In of CHA PH3: Enabled
Pull-In of CHA PH4: Enabled
Pull-In of CHB PH1: Enabled
Pull-In of CHB PH2: Enabled
Pull-In of CHB PH3: Enabled
Pull-In of CHB PH4: Enabled

CPU Voltage: 1.3
CPU GTL Voltage Reference (0/2): AUTO
CPU GTL Voltage Reference (1/3): AUTO
CPU PLL Voltage: 1.54
FSB Termination Voltage: 1.28
DRAM Voltage: 2.00
NB Voltage: 1.26
NB GTL Reference: AUTO
SBridge Voltage: AUTO
PCIE SATA Voltage: AUTO

Load Line Calibration: Disabled
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew : Normal
NB Clock Skew : Normal

Advance CPU Settings
CPU Ratio Setting: Manual
CPU VID: Default
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Intel® Virtualization Tech: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › OC intel E8600 + P5Q deluxe + corsair dominator PC6400 4gb