Overclock.net › Forums › Intel › Intel - General › BSOD upon reboot.
New Posts  All Forums:Forum Nav:

BSOD upon reboot. - Page 2

post #11 of 19
Try reseating everything into the board. Could be GPU related, try to move it to a different slot. Drop everything in BIOS to stock for a test and see if the problem persists.
Nehalem
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 @ 4.3GHz Evga X58 3SLI 2X SLI Evga GTX 275 FTWs 756/1620/1296 6GB Mushkin Blackline 1600MHz 78720591T 
Hard DriveMonitorPower
OCZ Vertex2 60GB Sony FW900 Corsair 850TX 
  hide details  
Reply
Nehalem
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 @ 4.3GHz Evga X58 3SLI 2X SLI Evga GTX 275 FTWs 756/1620/1296 6GB Mushkin Blackline 1600MHz 78720591T 
Hard DriveMonitorPower
OCZ Vertex2 60GB Sony FW900 Corsair 850TX 
  hide details  
Reply
post #12 of 19
Thread Starter 
Quote:
Originally Posted by djk11 View Post
Try reseating everything into the board. Could be GPU related, try to move it to a different slot. Drop everything in BIOS to stock for a test and see if the problem persists.
I know this wasn't the best thing to do but I was curious. I've been running Prime95 blend test for the past 2.5 hours and everything seems fine so far...

The Future (2012)
(14 items)
 
  
CPUMotherboardGraphicsRAM
Dual Intel Xeon E5-2690's EVGA Classified SR-X Tri 7970/Quad 7990 OR GTX 680/690 32GB G.SKILL Ripjaws Z @ 2400MHz 
Hard DriveOptical DriveMonitorPower
2x 240GB Corsair Force GT RAID 0, 1TB Samsung LG WH12LS38 Blu-Ray Burner 3x Dell U3011 Dual Corsair AX1200 
CaseAudio
CaseLabs TX10 + Extended Top/Pedestal Asus Xonar Essence STX 
  hide details  
Reply
The Future (2012)
(14 items)
 
  
CPUMotherboardGraphicsRAM
Dual Intel Xeon E5-2690's EVGA Classified SR-X Tri 7970/Quad 7990 OR GTX 680/690 32GB G.SKILL Ripjaws Z @ 2400MHz 
Hard DriveOptical DriveMonitorPower
2x 240GB Corsair Force GT RAID 0, 1TB Samsung LG WH12LS38 Blu-Ray Burner 3x Dell U3011 Dual Corsair AX1200 
CaseAudio
CaseLabs TX10 + Extended Top/Pedestal Asus Xonar Essence STX 
  hide details  
Reply
post #13 of 19
I was talking about your screen blanking problem after POST. You say the BSOD happens every couple days, so I guess you'll have to wait it out. Linpack in IBT/LinX/OCCT will stress your system much more than P95 blend.
Nehalem
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 @ 4.3GHz Evga X58 3SLI 2X SLI Evga GTX 275 FTWs 756/1620/1296 6GB Mushkin Blackline 1600MHz 78720591T 
Hard DriveMonitorPower
OCZ Vertex2 60GB Sony FW900 Corsair 850TX 
  hide details  
Reply
Nehalem
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 @ 4.3GHz Evga X58 3SLI 2X SLI Evga GTX 275 FTWs 756/1620/1296 6GB Mushkin Blackline 1600MHz 78720591T 
Hard DriveMonitorPower
OCZ Vertex2 60GB Sony FW900 Corsair 850TX 
  hide details  
Reply
post #14 of 19
Thread Starter 
Okay, I installed LinX. How should I run my test?
The Future (2012)
(14 items)
 
  
CPUMotherboardGraphicsRAM
Dual Intel Xeon E5-2690's EVGA Classified SR-X Tri 7970/Quad 7990 OR GTX 680/690 32GB G.SKILL Ripjaws Z @ 2400MHz 
Hard DriveOptical DriveMonitorPower
2x 240GB Corsair Force GT RAID 0, 1TB Samsung LG WH12LS38 Blu-Ray Burner 3x Dell U3011 Dual Corsair AX1200 
CaseAudio
CaseLabs TX10 + Extended Top/Pedestal Asus Xonar Essence STX 
  hide details  
Reply
The Future (2012)
(14 items)
 
  
CPUMotherboardGraphicsRAM
Dual Intel Xeon E5-2690's EVGA Classified SR-X Tri 7970/Quad 7990 OR GTX 680/690 32GB G.SKILL Ripjaws Z @ 2400MHz 
Hard DriveOptical DriveMonitorPower
2x 240GB Corsair Force GT RAID 0, 1TB Samsung LG WH12LS38 Blu-Ray Burner 3x Dell U3011 Dual Corsair AX1200 
CaseAudio
CaseLabs TX10 + Extended Top/Pedestal Asus Xonar Essence STX 
  hide details  
Reply
post #15 of 19
Click the All button for RAM and set it to run loops. Usually passing 20 runs is pretty stable, some people go to 50. Just watch temps, it will get your CPU hotter than Prime. You don't want to see much higher than 80C or so, I'd halt testing at 85C, though its still safe into the 90s and will thermal throttle by itself when it really gets too hot.
Nehalem
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 @ 4.3GHz Evga X58 3SLI 2X SLI Evga GTX 275 FTWs 756/1620/1296 6GB Mushkin Blackline 1600MHz 78720591T 
Hard DriveMonitorPower
OCZ Vertex2 60GB Sony FW900 Corsair 850TX 
  hide details  
Reply
Nehalem
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 @ 4.3GHz Evga X58 3SLI 2X SLI Evga GTX 275 FTWs 756/1620/1296 6GB Mushkin Blackline 1600MHz 78720591T 
Hard DriveMonitorPower
OCZ Vertex2 60GB Sony FW900 Corsair 850TX 
  hide details  
Reply
post #16 of 19
Thread Starter 
Quote:
Originally Posted by djk11 View Post
Click the All button for RAM and set it to run loops. Usually passing 20 runs is pretty stable, some people go to 50. Just watch temps, it will get your CPU hotter than Prime. You don't want to see much higher than 80C or so, I'd halt testing at 85C, though its still safe into the 90s and will thermal throttle by itself when it really gets too hot.
Okay, in a tutorial I read It says to use 200-300 less than what's "free" in task manager, but I'll go ahead and press all.

I'm going to run 50 overnight and let you know how it goes.
The Future (2012)
(14 items)
 
  
CPUMotherboardGraphicsRAM
Dual Intel Xeon E5-2690's EVGA Classified SR-X Tri 7970/Quad 7990 OR GTX 680/690 32GB G.SKILL Ripjaws Z @ 2400MHz 
Hard DriveOptical DriveMonitorPower
2x 240GB Corsair Force GT RAID 0, 1TB Samsung LG WH12LS38 Blu-Ray Burner 3x Dell U3011 Dual Corsair AX1200 
CaseAudio
CaseLabs TX10 + Extended Top/Pedestal Asus Xonar Essence STX 
  hide details  
Reply
The Future (2012)
(14 items)
 
  
CPUMotherboardGraphicsRAM
Dual Intel Xeon E5-2690's EVGA Classified SR-X Tri 7970/Quad 7990 OR GTX 680/690 32GB G.SKILL Ripjaws Z @ 2400MHz 
Hard DriveOptical DriveMonitorPower
2x 240GB Corsair Force GT RAID 0, 1TB Samsung LG WH12LS38 Blu-Ray Burner 3x Dell U3011 Dual Corsair AX1200 
CaseAudio
CaseLabs TX10 + Extended Top/Pedestal Asus Xonar Essence STX 
  hide details  
Reply
post #17 of 19
Sounds good, but if your cooling is really stock I wouldn't let it run unsupervised. If you've got a water loop or something you should be fine running Linpack overnight.
Nehalem
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 @ 4.3GHz Evga X58 3SLI 2X SLI Evga GTX 275 FTWs 756/1620/1296 6GB Mushkin Blackline 1600MHz 78720591T 
Hard DriveMonitorPower
OCZ Vertex2 60GB Sony FW900 Corsair 850TX 
  hide details  
Reply
Nehalem
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 @ 4.3GHz Evga X58 3SLI 2X SLI Evga GTX 275 FTWs 756/1620/1296 6GB Mushkin Blackline 1600MHz 78720591T 
Hard DriveMonitorPower
OCZ Vertex2 60GB Sony FW900 Corsair 850TX 
  hide details  
Reply
post #18 of 19
Thread Starter 
Quote:
Originally Posted by djk11 View Post
Sounds good, but if your cooling is really stock I wouldn't let it run unsupervised. If you've got a water loop or something you should be fine running Linpack overnight.
Yeah I probably shouldn't... I'll supervise it through my iPhone.
The Future (2012)
(14 items)
 
  
CPUMotherboardGraphicsRAM
Dual Intel Xeon E5-2690's EVGA Classified SR-X Tri 7970/Quad 7990 OR GTX 680/690 32GB G.SKILL Ripjaws Z @ 2400MHz 
Hard DriveOptical DriveMonitorPower
2x 240GB Corsair Force GT RAID 0, 1TB Samsung LG WH12LS38 Blu-Ray Burner 3x Dell U3011 Dual Corsair AX1200 
CaseAudio
CaseLabs TX10 + Extended Top/Pedestal Asus Xonar Essence STX 
  hide details  
Reply
The Future (2012)
(14 items)
 
  
CPUMotherboardGraphicsRAM
Dual Intel Xeon E5-2690's EVGA Classified SR-X Tri 7970/Quad 7990 OR GTX 680/690 32GB G.SKILL Ripjaws Z @ 2400MHz 
Hard DriveOptical DriveMonitorPower
2x 240GB Corsair Force GT RAID 0, 1TB Samsung LG WH12LS38 Blu-Ray Burner 3x Dell U3011 Dual Corsair AX1200 
CaseAudio
CaseLabs TX10 + Extended Top/Pedestal Asus Xonar Essence STX 
  hide details  
Reply
post #19 of 19
Thread Starter 
Well, I have good news. LinX passed with no errors after 50 runs, and my CPU temps never passed 70C, which is also really nice. I am going to see if reinstalling my AMD Cataylst drivers would help, and I have another monitor laying around that I can test if it has the same POST issue. As far as the BSOD, I'm still not sure. I'm leaning towards it being more of a software issue considering how I've passed all the stability tests thoroughly.

The Future (2012)
(14 items)
 
  
CPUMotherboardGraphicsRAM
Dual Intel Xeon E5-2690's EVGA Classified SR-X Tri 7970/Quad 7990 OR GTX 680/690 32GB G.SKILL Ripjaws Z @ 2400MHz 
Hard DriveOptical DriveMonitorPower
2x 240GB Corsair Force GT RAID 0, 1TB Samsung LG WH12LS38 Blu-Ray Burner 3x Dell U3011 Dual Corsair AX1200 
CaseAudio
CaseLabs TX10 + Extended Top/Pedestal Asus Xonar Essence STX 
  hide details  
Reply
The Future (2012)
(14 items)
 
  
CPUMotherboardGraphicsRAM
Dual Intel Xeon E5-2690's EVGA Classified SR-X Tri 7970/Quad 7990 OR GTX 680/690 32GB G.SKILL Ripjaws Z @ 2400MHz 
Hard DriveOptical DriveMonitorPower
2x 240GB Corsair Force GT RAID 0, 1TB Samsung LG WH12LS38 Blu-Ray Burner 3x Dell U3011 Dual Corsair AX1200 
CaseAudio
CaseLabs TX10 + Extended Top/Pedestal Asus Xonar Essence STX 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › BSOD upon reboot.