Overclock.net › Forums › AMD › AMD CPUs › 1055T Unable to get above 233MHz.. Help
New Posts  All Forums:Forum Nav:

1055T Unable to get above 233MHz.. Help - Page 5

post #41 of 58
Quote:
Originally Posted by hpflyby View Post
Coretemp and hwmonitor attached... doesnt seem good...
Turn off ACC in your BIOS. It looks like you have it turned on.
    
CPUMotherboardGraphicsRAM
INTEL ASUS XFX  SAMSUNG 
Hard DriveOptical DriveCoolingOS
WD/ST LG KUHLER WINDOWS 
MonitorKeyboardPowerCase
LG/SAMSUNG IBM MODEL M CORSAIR THERMALTAKE 
MouseMouse PadAudio
MS INTELLIMOUSE EXPLORER 3.0 REGULAR LARGE PAD ONBOARD but it USED TO BE A XONAR DG  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
INTEL ASUS XFX  SAMSUNG 
Hard DriveOptical DriveCoolingOS
WD/ST LG KUHLER WINDOWS 
MonitorKeyboardPowerCase
LG/SAMSUNG IBM MODEL M CORSAIR THERMALTAKE 
MouseMouse PadAudio
MS INTELLIMOUSE EXPLORER 3.0 REGULAR LARGE PAD ONBOARD but it USED TO BE A XONAR DG  
  hide details  
Reply
post #42 of 58
Quote:
Originally Posted by GanjaSMK View Post
Turn off ACC in your BIOS. It looks like you have it turned on.
acc? advanced cpu/clock calibrations? o_O
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3.941ghz 1.47 NB 2914 1.3V 2043HT Asus M4A89TD-PRO / CROSSHAIR IV Saphire 6950@6970 880 1375 Clocks G.Skill Trident 2x2gb @ 1554 6-7-6-7-20-1T 
Hard DriveOSMonitorKeyboard
Samsung SPINTPOINT F3 500GB Windows 7 x64 Samsung PX2370 Dell 
PowerCaseMouseMouse Pad
Ocz Fatality 750w Lian LI PC071 Razer Death Adder Razer Vespula 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3.941ghz 1.47 NB 2914 1.3V 2043HT Asus M4A89TD-PRO / CROSSHAIR IV Saphire 6950@6970 880 1375 Clocks G.Skill Trident 2x2gb @ 1554 6-7-6-7-20-1T 
Hard DriveOSMonitorKeyboard
Samsung SPINTPOINT F3 500GB Windows 7 x64 Samsung PX2370 Dell 
PowerCaseMouseMouse Pad
Ocz Fatality 750w Lian LI PC071 Razer Death Adder Razer Vespula 
  hide details  
Reply
post #43 of 58
Thread Starter 
BIOS does not list each core seperate just gives the CPU temp.

Quote:
Originally Posted by GanjaSMK View Post
Turn off ACC in your BIOS. It looks like you have it turned on.
It was set to Manual not sure why, I changed to Auto. Still can't see core temps anymore

Currently Sitting at 277 / 3878. can run Prime95 and LinX fine.

Just Crashed after reboot:

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: 0000000000000001, Address of the instruction which caused the bugcheck
Arg3: fffff88008df8900, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
+0
00000000`00000001 ?? ???

CONTEXT: fffff88008df8900 -- (.cxr 0xfffff88008df8900)
rax=0000000000000018 rbx=fffff8a0000110d8 rcx=fffff8a00001c0c8
rdx=000001e0069850ec rsi=fffff8a00160c060 rdi=0000000000000002
rip=0000000000000001 rsp=fffff88008df92e8 rbp=0000000000000004
r8=0000000000000008 r9=0000000000000001 r10=fffffa800699a120
r11=0000000000000201 r12=fffffa80069a11a0 r13=0000000000000000
r14=0000000000000001 r15=0000000000000001
iopl=0 nv up ei pl nz na pe cy
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010203
00000000`00000001 ?? ???
Resetting default scope

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x3B

PROCESS_NAME: svchost.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from 0000000000000000 to 0000000000000001

STACK_TEXT:
fffff880`08df8038 fffff800`02cd22a9 : 00000000`0000003b 00000000`c0000005 00000000`00000001 fffff880`08df8900 : nt!KeBugCheckEx
fffff880`08df8040 fffff800`02cd1bfc : fffff880`08df90a8 fffff880`08df8900 00000000`00000000 fffff800`02cfea50 : nt!KiBugCheckDispatch+0x69
fffff880`08df8180 fffff800`02cfe55d : fffff800`02eec7f0 fffff800`02e11634 fffff800`02c53000 fffff880`08df90a8 : nt!KiSystemServiceHandler+0x7c
fffff880`08df81c0 fffff800`02cfd335 : fffff800`02e1a788 fffff880`08df8238 fffff880`08df90a8 fffff800`02c53000 : nt!RtlpExecuteHandlerForException+0xd
fffff880`08df81f0 fffff800`02d0e3b1 : fffff880`08df90a8 fffff880`08df8900 fffff880`00000000 00000000`00000002 : nt!RtlDispatchException+0x415
fffff880`08df88d0 fffff800`02cd2382 : fffff880`08df90a8 fffff8a0`000110d8 fffff880`08df9150 fffff8a0`0160c060 : nt!KiDispatchException+0x135
fffff880`08df8f70 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiExceptionDispatch+0xc2


STACK_COMMAND: kb

FOLLOWUP_IP:
nt!KiSystemServiceHandler+7c
fffff800`02cd1bfc b801000000 mov eax,1

SYMBOL_STACK_INDEX: 2

SYMBOL_NAME: nt!KiSystemServiceHandler+7c

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

IMAGE_NAME: ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 4d9fdd5b

FAILURE_BUCKET_ID: X64_0x3B_nt!KiSystemServiceHandler+7c

BUCKET_ID: X64_0x3B_nt!KiSystemServiceHandler+7c

Followup: MachineOwner
---------
Edited by hpflyby - 7/24/11 at 4:59pm
ULTRA
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1055T Gigabyte GA-890FXA-UD5 XFX 6950 CrossFireX G.Skill Ripjaw X Series 8GB 
Hard DriveOSPowerCase
G.Skill Phoenix Pro 120GB SSD Windows 7 64-Bit ThermalTake 700W Cooler Master Cosmos 
  hide details  
Reply
ULTRA
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1055T Gigabyte GA-890FXA-UD5 XFX 6950 CrossFireX G.Skill Ripjaw X Series 8GB 
Hard DriveOSPowerCase
G.Skill Phoenix Pro 120GB SSD Windows 7 64-Bit ThermalTake 700W Cooler Master Cosmos 
  hide details  
Reply
post #44 of 58
man but you are not giving us too much detail of what are u doing

What sys spec... i dunno you just givin us fsb x multiplier :S dont know

give me more details

ps: cpu temp on bios is ok, is what we are looking for.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3.941ghz 1.47 NB 2914 1.3V 2043HT Asus M4A89TD-PRO / CROSSHAIR IV Saphire 6950@6970 880 1375 Clocks G.Skill Trident 2x2gb @ 1554 6-7-6-7-20-1T 
Hard DriveOSMonitorKeyboard
Samsung SPINTPOINT F3 500GB Windows 7 x64 Samsung PX2370 Dell 
PowerCaseMouseMouse Pad
Ocz Fatality 750w Lian LI PC071 Razer Death Adder Razer Vespula 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3.941ghz 1.47 NB 2914 1.3V 2043HT Asus M4A89TD-PRO / CROSSHAIR IV Saphire 6950@6970 880 1375 Clocks G.Skill Trident 2x2gb @ 1554 6-7-6-7-20-1T 
Hard DriveOSMonitorKeyboard
Samsung SPINTPOINT F3 500GB Windows 7 x64 Samsung PX2370 Dell 
PowerCaseMouseMouse Pad
Ocz Fatality 750w Lian LI PC071 Razer Death Adder Razer Vespula 
  hide details  
Reply
post #45 of 58
Thread Starter 
Quote:
Originally Posted by darthmalak View Post
man but you are not giving us too much detail of what are u doing

What sys spec... i dunno you just givin us fsb x multiplier :S dont know

give me more details

ps: cpu temp on bios is ok, is what we are looking for.
OK I got the temps back by resetting the BIOS to fail safe... so its something that changed during the overclocking... back to work.

Sorry @dathmalak, so you dont have to read back through the thread I am trying to get a stable overclock as close to 4GHz as I can. Atached are where I was at when I lost my temp readings.


ULTRA
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1055T Gigabyte GA-890FXA-UD5 XFX 6950 CrossFireX G.Skill Ripjaw X Series 8GB 
Hard DriveOSPowerCase
G.Skill Phoenix Pro 120GB SSD Windows 7 64-Bit ThermalTake 700W Cooler Master Cosmos 
  hide details  
Reply
ULTRA
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1055T Gigabyte GA-890FXA-UD5 XFX 6950 CrossFireX G.Skill Ripjaw X Series 8GB 
Hard DriveOSPowerCase
G.Skill Phoenix Pro 120GB SSD Windows 7 64-Bit ThermalTake 700W Cooler Master Cosmos 
  hide details  
Reply
post #46 of 58
Thread Starter 
http://valid.canardpc.com/show_oc.php?id=1922938

I am crashing during stress test, both Prime95 and LinX.

Crash info:

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8007712028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000b6004000, High order 32-bits of the MCi_STATUS value.
Arg4: 00000000e9000135, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------
BUGCHECK_STR: 0x124_AuthenticAMD
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: prime95.exe
CURRENT_IRQL: f
STACK_COMMAND: kb
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: hardware
IMAGE_NAME: hardware
DEBUG_FLR_IMAGE_TIMESTAMP: 0
FAILURE_BUCKET_ID: X64_0x124_AuthenticAMD_PROCESSOR_CACHE
BUCKET_ID: X64_0x124_AuthenticAMD_PROCESSOR_CACHE

Any ideas of where I can go from here?.... I am only hitting about 51c full load.
Edited by hpflyby - 7/24/11 at 7:32pm
ULTRA
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1055T Gigabyte GA-890FXA-UD5 XFX 6950 CrossFireX G.Skill Ripjaw X Series 8GB 
Hard DriveOSPowerCase
G.Skill Phoenix Pro 120GB SSD Windows 7 64-Bit ThermalTake 700W Cooler Master Cosmos 
  hide details  
Reply
ULTRA
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1055T Gigabyte GA-890FXA-UD5 XFX 6950 CrossFireX G.Skill Ripjaw X Series 8GB 
Hard DriveOSPowerCase
G.Skill Phoenix Pro 120GB SSD Windows 7 64-Bit ThermalTake 700W Cooler Master Cosmos 
  hide details  
Reply
post #47 of 58
error 124 is memory i think
can you slacken the rest of the ram timings?
you done 9-9-9 and 2t,but you can you slacken the rest?
also did you up the cpu-nb to 1.32 and ram volts to 1.6/1.65?
i did mention linx would crash my pc wetheer overclocked or not,can you run some crysis loops
Edited by MightyMission - 7/25/11 at 12:37am
Lil Cutey
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500K Z77E-ITX NVIDIA GeForce GTX 680 G Skill RipJaws X  
Hard DriveHard DriveHard DriveHard Drive
OCZ Nocti 120GB mSATA SSD OCZ Agility 3 OCZ Agility 4 Intenso 256gb sata III 
Optical DriveCoolingOSMonitor
Samsung External DVD Water! Windows 8 Pro 64bit Samsung 32" HDTV 
KeyboardPowerCaseMouse
Dell Multimedia Cooler Master Elite Power 500W BitFenix Prodigy (Black) Tesco cheapy special! 
Mouse PadAudio
Sky Blue with coffee Stain! Zotac GTX 680 
  hide details  
Reply
Lil Cutey
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500K Z77E-ITX NVIDIA GeForce GTX 680 G Skill RipJaws X  
Hard DriveHard DriveHard DriveHard Drive
OCZ Nocti 120GB mSATA SSD OCZ Agility 3 OCZ Agility 4 Intenso 256gb sata III 
Optical DriveCoolingOSMonitor
Samsung External DVD Water! Windows 8 Pro 64bit Samsung 32" HDTV 
KeyboardPowerCaseMouse
Dell Multimedia Cooler Master Elite Power 500W BitFenix Prodigy (Black) Tesco cheapy special! 
Mouse PadAudio
Sky Blue with coffee Stain! Zotac GTX 680 
  hide details  
Reply
post #48 of 58
Having 4 sticks of memory isn't going to hurt your 1055T OC.
(See my sig)
Increase the CPU-NB voltage. Make sure RAM timings are set to manual and not auto.

Error 124 is usually CPU instability. You may need more CPU voltage. Or perhaps a better heatsink; bad cooling is bad for OC as better cooling can push back a wall where you start to need significantly more voltage than usual for small clock increases (I can prove this from personal experience on my 1055). The A70 is not very optimal on AMD platforms due to its limitation of mounting to blow upward or downward only, and as such I do not recommend it. Check your temperatures.
post #49 of 58
i made that mistake,apparently the OP has 2x4gb not 4x2gb.
as a ram fan,would you say the rest of the ram timings after 9-9-9-27-x-x-x are as important as the first 4?
Lil Cutey
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500K Z77E-ITX NVIDIA GeForce GTX 680 G Skill RipJaws X  
Hard DriveHard DriveHard DriveHard Drive
OCZ Nocti 120GB mSATA SSD OCZ Agility 3 OCZ Agility 4 Intenso 256gb sata III 
Optical DriveCoolingOSMonitor
Samsung External DVD Water! Windows 8 Pro 64bit Samsung 32" HDTV 
KeyboardPowerCaseMouse
Dell Multimedia Cooler Master Elite Power 500W BitFenix Prodigy (Black) Tesco cheapy special! 
Mouse PadAudio
Sky Blue with coffee Stain! Zotac GTX 680 
  hide details  
Reply
Lil Cutey
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500K Z77E-ITX NVIDIA GeForce GTX 680 G Skill RipJaws X  
Hard DriveHard DriveHard DriveHard Drive
OCZ Nocti 120GB mSATA SSD OCZ Agility 3 OCZ Agility 4 Intenso 256gb sata III 
Optical DriveCoolingOSMonitor
Samsung External DVD Water! Windows 8 Pro 64bit Samsung 32" HDTV 
KeyboardPowerCaseMouse
Dell Multimedia Cooler Master Elite Power 500W BitFenix Prodigy (Black) Tesco cheapy special! 
Mouse PadAudio
Sky Blue with coffee Stain! Zotac GTX 680 
  hide details  
Reply
post #50 of 58
Thread Starter 
Quote:
Originally Posted by xd_1771 View Post
Having 4 sticks of memory isn't going to hurt your 1055T OC.
(See my sig)
Increase the CPU-NB voltage. Make sure RAM timings are set to manual and not auto.

Error 124 is usually CPU instability. You may need more CPU voltage. Or perhaps a better heatsink; bad cooling is bad for OC as better cooling can push back a wall where you start to need significantly more voltage than usual for small clock increases (I can prove this from personal experience on my 1055). The A70 is not very optimal on AMD platforms due to its limitation of mounting to blow upward or downward only, and as such I do not recommend it. Check your temperatures.
I have not seen a temp higher than 58c....Seems like I am ok there right?...

I will try to increase the voltage tonight see what that does.
Thanks
ULTRA
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1055T Gigabyte GA-890FXA-UD5 XFX 6950 CrossFireX G.Skill Ripjaw X Series 8GB 
Hard DriveOSPowerCase
G.Skill Phoenix Pro 120GB SSD Windows 7 64-Bit ThermalTake 700W Cooler Master Cosmos 
  hide details  
Reply
ULTRA
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1055T Gigabyte GA-890FXA-UD5 XFX 6950 CrossFireX G.Skill Ripjaw X Series 8GB 
Hard DriveOSPowerCase
G.Skill Phoenix Pro 120GB SSD Windows 7 64-Bit ThermalTake 700W Cooler Master Cosmos 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › 1055T Unable to get above 233MHz.. Help