Originally Posted by Asustweaker
Well being as it is a gpu screw, i would use which ever wire has thinner strands. 3 or 4 individual strands twisted together should do it. since you need the heatsink to make good contact and pressure, mount the heatsink using the good screw holes first. Then feed the wire through the PCB, and into the screw hole. leave the excess wire ( a few inches) sticking out. Fold it down flat onto the pcb. This will assure you will force the screw next to the wire, not on top, smashing it. Once you have driven the screw in, cut the left overs off.
Thanks a ton. It worked out. Thew screw is in their is some presser but not as much as I would like.
For any one having the same problem. Just take 4 pieces of quality copper speaker wire rap to pieces together and do the same with the other 2 so that you end up with 2 pieces of wire. Put one piece of wire in the right of the hole and another one on the left side of the hole so that they are opposite then twist the screw with some presser.