Overclock.net › Forums › Intel › Intel CPUs › Getting my 2600k to 5GHz stable
New Posts  All Forums:Forum Nav:

Getting my 2600k to 5GHz stable - Page 3

post #21 of 56
Safe VCCIO max to run 24/7 is 1.2.
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 4.5GHZ 1.33Vcore Asus P8P67 Deluxe B3 GIGABYTE 570 GTX 13I Rev2 G Skill 1600 2x2 set 
Hard DriveCoolingOSMonitor
kingston hyperx 3k  xspc rs 240 kit windows 7 64bit 22" viewsomic hd led 
Power
Seasonic x750 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k 4.5GHZ 1.33Vcore Asus P8P67 Deluxe B3 GIGABYTE 570 GTX 13I Rev2 G Skill 1600 2x2 set 
Hard DriveCoolingOSMonitor
kingston hyperx 3k  xspc rs 240 kit windows 7 64bit 22" viewsomic hd led 
Power
Seasonic x750 
  hide details  
Reply
post #22 of 56
Lowering CPU PLL voltage at higher clocks didn't help me in my case.
It was fine with 1.709 at 4.6 but I needed 1.832 for 5.0.
Anything below will gives me BSOD.
Also it all depends of what you have but my RAM needed a bit more DRAM voltage even though it is set at stock.
VTT(VCCIO) needed to be up also. (This gives me so much heat...)
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
post #23 of 56
Thread Starter 
Upped DRAM voltage a notch and the freezes are now BSOD's (101) again. P95 failed at the 29 minute mark.

@Tuna: you say you had to set CPU PLL voltage to 1.832 for 5GHz? What kind of vcore were you running for that?

Looking more and more like it's impossible for this chip to hit 5GHz at 1.5v or below. The only other options I see for me right now (apart from maybe the PLL mentioned above) is trying Extreme LLC and raising vcore phase control.

Anyone messed with VRM frequency properly? Currently at 350 as per a few recommendations found elsewhere. Would dropping or raising it effect anything?
post #24 of 56
Try with these settings and tweak it accordingly. Main tweak will be around vcore, vccio and pll voltage.

Ai Tweaker
Ai Overclock Tuner: Manual
BLCK/PCIE Frequency: 100.0
Turbo Ratio: By All Cores
By All Cores: 50
Internal PLL Voltage: Enabled
Memory Frequency: use the rated speed for your memory
DRAM Timing Control: use the rated timings for your memory
EPU Power Saving MODE: Disabled

Ai Tweaker (in the DIGI+ VRM section)
Load-Line Calibration: Ultra High
VRM Frequency: Manual
VRM Fixed Frequency Mode: 350
Phase Control: Extreme
Duty Control: Extreme
CPU Current Capability: 140%
CPU Voltage: Manual
CPU Voltage: 1.5V
DRAM Voltage: 1.5
VCCSA Voltage: Auto
VCCIO Voltage: 1.15V
CPU PLL Voltage: First try around the 1.7 region then try around the 1.8 region
PCH Voltage: Auto
CPU Spread Spectrum: Enabled

Advanced\\ CPU Configuration
CPU Ratio: Auto
Active Processor Cores: All
Enhanced Intel SpeedStep Technology: Enabled
Turbo Mode: Enabled
CPU C1E: Enabled
CPU C3 Report: Auto
CPU C6 Report: Auto



Leave the ones at the bottom to what ever was default, if you have forgotton clear CMOS and check.

Intel Adaptive Thermal Monitor
Limit CPUID Maximum
Execute Disable Bit
Intel Virtualization Technology

Work your way down from 1.5v with those settings, if that doesn't work and you recieve a 101 error try working your way down from 1.53v.


EDIT:

You could try using extreme LLC, but I don't recommend it, it causes voltage spikes and can be quite dangerous around those votlages but only way to check is for you to try it. I personally would leave it at Ultra high.
Edited by munaim1 - 7/28/11 at 8:50am
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
it looks alive
(17 items)
 
Sandy Transformed
(69 photos)
 
CPUMotherboardGraphicsRAM
i5 2500K [5ghz 1.44v 24/7] Asus Maximus IV Extreme SLI GTX 460 @ 920/1840/4100 [1.11v] 4GB Dominator GT @ 2133mhz CL8 [1.65v] 
Hard DriveHard DriveCoolingOS
Intel X25-M G2 80GB 3x Samsung F3 500GB RAID 0 EK Supreme HF Full Copper Windows 7 Ultimate 64bit 
MonitorPowerCaseAudio
LG42SL9500 42" 1080p [Surround Soon] XFX XXX Edition 650w Xigmatec Elysium JVC HA-RX700 [foam mod] 
  hide details  
Reply
post #25 of 56
Yeah max VCCIO for 24/7 is 1.2V.
Turbulence
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5-2500k 4.4GHz Asus P8P67 Pro 3.1 HIS HD 7870 2GB G.SKILL Ripjaws X 16GB 1600MHz 
Hard DriveHard DriveOptical DriveCooling
Crucial m4 128GB Samsung Spinpoint F3 1TB Asus DRW-24B1ST Noctua NH-D14 
CoolingOSMonitorKeyboard
Accelero Twin Turbo II Windows 7 Professional N Dell U2311H Realforce 87U White 55cN 
PowerCaseMouseMouse Pad
Corsair TX650V2 Fractal Design R3 Black Pearl Razer DeathAdder SteelSeries 4HD 
AudioAudioAudio
Audinst HUD-mx1 Beyerdynamic DT990 Premium 600 Ω Recabled M-Audio AV40 
  hide details  
Reply
Turbulence
(19 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5-2500k 4.4GHz Asus P8P67 Pro 3.1 HIS HD 7870 2GB G.SKILL Ripjaws X 16GB 1600MHz 
Hard DriveHard DriveOptical DriveCooling
Crucial m4 128GB Samsung Spinpoint F3 1TB Asus DRW-24B1ST Noctua NH-D14 
CoolingOSMonitorKeyboard
Accelero Twin Turbo II Windows 7 Professional N Dell U2311H Realforce 87U White 55cN 
PowerCaseMouseMouse Pad
Corsair TX650V2 Fractal Design R3 Black Pearl Razer DeathAdder SteelSeries 4HD 
AudioAudioAudio
Audinst HUD-mx1 Beyerdynamic DT990 Premium 600 Ω Recabled M-Audio AV40 
  hide details  
Reply
post #26 of 56
For 5ghz i ran 1.5v and PLL at 1.8 also set it to level 1 or 2
    
CPUMotherboardGraphicsRAM
Intel Corei5 2500k @ 5ghz - 1.52v ASRock Fatal1ty P67 Professional 2x XFX 6970 2GB XFire and 1x Nvidia EVGA GT430 G.Skill Ripjaw 8gb (2x4gb) 1600mhz DDR3 
Hard DriveOptical DriveOSMonitor
Samsung 840 Pro 512GB Lite-On DVD /CD Burner & Lite-On Blu-Ray Windows 7 Home Premium - 64 Bit 27" 3D Samsung S27A950D + 24" Samsung 2493HM 
KeyboardPowerCaseMouse
Ducky 1087 (w/ WASD blank white keycaps) PC Power and Cooling Silencer Mk II 950W Silverstone Raven-02 Razer Mamba 
Mouse PadAudioAudio
Ratpadz GS HiFiMan HE-300 Headphones HiFiMan HE-300 Headphones 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Corei5 2500k @ 5ghz - 1.52v ASRock Fatal1ty P67 Professional 2x XFX 6970 2GB XFire and 1x Nvidia EVGA GT430 G.Skill Ripjaw 8gb (2x4gb) 1600mhz DDR3 
Hard DriveOptical DriveOSMonitor
Samsung 840 Pro 512GB Lite-On DVD /CD Burner & Lite-On Blu-Ray Windows 7 Home Premium - 64 Bit 27" 3D Samsung S27A950D + 24" Samsung 2493HM 
KeyboardPowerCaseMouse
Ducky 1087 (w/ WASD blank white keycaps) PC Power and Cooling Silencer Mk II 950W Silverstone Raven-02 Razer Mamba 
Mouse PadAudioAudio
Ratpadz GS HiFiMan HE-300 Headphones HiFiMan HE-300 Headphones 
  hide details  
Reply
post #27 of 56
BSOD Codes for SandyBridge
0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT)
0x101 = add more vcore
0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT
0x1E = add more vcore
0x3B = add more vcore
0xD1 = add QPI/VTT voltage
“0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances”
0X109 = add DDR3 voltage
0x0A = add QPI/VTT voltage

http://www.overclock.net/general-pro...hen-ocing.html
    
CPUMotherboardGraphicsRAM
Intel I7 2600k Asus p8p67-Deluxe Zotac GTX780 6GB OC G-skill Ripjaws 1866 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 EVO 250 Samsung EVO 120 Western Digital 1TB Black Lite On 20x DVD RW 
CoolingOSOSOS
XSPC RayStorm + 360Extreme Rad Arch Linux Windows 8.1 x64 WindowsRE 
MonitorKeyboardPowerCase
Asus PB278Q ThermalTake Meka G1 Evga SuperNova 1000 P2 Xigmatek Elysium 
MouseMouse PadAudio
Logitec G500 Gaming Mouse Ultra Pad Fiio E-17 + ATH-M50 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel I7 2600k Asus p8p67-Deluxe Zotac GTX780 6GB OC G-skill Ripjaws 1866 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 EVO 250 Samsung EVO 120 Western Digital 1TB Black Lite On 20x DVD RW 
CoolingOSOSOS
XSPC RayStorm + 360Extreme Rad Arch Linux Windows 8.1 x64 WindowsRE 
MonitorKeyboardPowerCase
Asus PB278Q ThermalTake Meka G1 Evga SuperNova 1000 P2 Xigmatek Elysium 
MouseMouse PadAudio
Logitec G500 Gaming Mouse Ultra Pad Fiio E-17 + ATH-M50 
  hide details  
Reply
post #28 of 56
Thread Starter 
Quote:
Originally Posted by munaim1 View Post
Ai Tweaker
Ai Overclock Tuner: Manual
BLCK/PCIE Frequency: 100.0
Turbo Ratio: By All Cores
By All Cores: 50
Internal PLL Voltage: Enabled
Memory Frequency: use the rated speed for your memory
DRAM Timing Control: use the rated timings for your memory
EPU Power Saving MODE: Disabled

Ai Tweaker (in the DIGI+ VRM section)
Load-Line Calibration: Ultra High
VRM Frequency: Manual
VRM Fixed Frequency Mode: 350
Phase Control: Extreme
Duty Control: Extreme
CPU Current Capability: 150%
CPU Voltage: Manual
CPU Voltage: 1.5V
DRAM Voltage: 1.50625
VCCSA Voltage: Auto
VCCIO Voltage: 1.175V
CPU PLL Voltage: 1.8V
PCH Voltage: Auto
CPU Spread Spectrum: Enabled

Advanced\\ CPU Configuration
CPU Ratio: Auto
Active Processor Cores: All
Enhanced Intel SpeedStep Technology: Enabled
Turbo Mode: Enabled
CPU C1E: Enabled
CPU C3 Report: Auto
CPU C6 Report: Auto
Trying your settings with the bolded small tweaks. BSOD code 101 after 4 minutes. The main difference between these settings and my previous settings (BSOD after 29 minutes) is PLL 1.8v (up from 1.7) and C1E enabled (from auto).

I appreciate your help munaim (and everyone with a valid contribution ). Don't think I'll even bother going above 1.5. Really this thread was to get some help trying to stabalize without increasing vcore. I won't be running above 1.5v 24/7 so there isn't much point for me in bothering to try.

Going to give Extreme LLC a quick try keeping a close eye on voltage. Is there any reason to increase/decrease vcore over-current protection from 150%?

With how fast it BSOD'd I have a feeling it's too far from stable to be fixed by these small tweaks. It's gonna need some vcore.. continue to test I shall though!
post #29 of 56
Quote:
Originally Posted by Tunagoblin View Post
Lowering CPU PLL voltage at higher clocks didn't help me in my case.
It was fine with 1.709 at 4.6 but I needed 1.832 for 5.0.
Anything below will gives me BSOD.
Also it all depends of what you have but my RAM needed a bit more DRAM voltage even though it is set at stock.
VTT(VCCIO) needed to be up also. (This gives me so much heat...)
I agree.

Increasing my cpu pll voltage to 1.8v+ helped alot when stability testing at 5ghz
Chewy's Chomper
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel I7 6700k Asis Z170 Deluxe MSI GTX 1080 Gaming x 16GB Corsair vengence DDR4 3200 
Hard DriveCoolingOSMonitor
Samsung M2 256gb nvme Custom loop, 360+120 rads Windows 10 64bit Asus 28" MG28UQ 4K 
PowerCase
Seasonic X series 750w gold Corsair 400c 
  hide details  
Reply
Chewy's Chomper
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel I7 6700k Asis Z170 Deluxe MSI GTX 1080 Gaming x 16GB Corsair vengence DDR4 3200 
Hard DriveCoolingOSMonitor
Samsung M2 256gb nvme Custom loop, 360+120 rads Windows 10 64bit Asus 28" MG28UQ 4K 
PowerCase
Seasonic X series 750w gold Corsair 400c 
  hide details  
Reply
post #30 of 56
Quote:
Originally Posted by Glancey View Post
Trying your settings with the bolded small tweaks. BSOD code 101 after 4 minutes. The main difference between these settings and my previous settings (BSOD after 29 minutes) is PLL 1.8v (up from 1.7) and C1E enabled (from auto).

I appreciate your help munaim (and everyone with a valid contribution ). Don't think I'll even bother going above 1.5. Really this thread was to get some help trying to stabalize without increasing vcore. I won't be running above 1.5v 24/7 so there isn't much point for me in bothering to try.

Going to give Extreme LLC a quick try keeping a close eye on voltage. Is there any reason to increase/decrease vcore over-current protection from 150%?

With how fast it BSOD'd I have a feeling it's too far from stable to be fixed by these small tweaks. It's gonna need some vcore.. continue to test I shall though!
The settings you are using are fine although vcore looks to be the culprit increase a notch and re test, If your temps are ok then going above 1.5v is fine
Chewy's Chomper
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel I7 6700k Asis Z170 Deluxe MSI GTX 1080 Gaming x 16GB Corsair vengence DDR4 3200 
Hard DriveCoolingOSMonitor
Samsung M2 256gb nvme Custom loop, 360+120 rads Windows 10 64bit Asus 28" MG28UQ 4K 
PowerCase
Seasonic X series 750w gold Corsair 400c 
  hide details  
Reply
Chewy's Chomper
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel I7 6700k Asis Z170 Deluxe MSI GTX 1080 Gaming x 16GB Corsair vengence DDR4 3200 
Hard DriveCoolingOSMonitor
Samsung M2 256gb nvme Custom loop, 360+120 rads Windows 10 64bit Asus 28" MG28UQ 4K 
PowerCase
Seasonic X series 750w gold Corsair 400c 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Getting my 2600k to 5GHz stable