Overclock.net › Forums › Cooling › Air Cooling › Hyper 212+ temps 10C increase on idle
New Posts  All Forums:Forum Nav:

Hyper 212+ temps 10C increase on idle - Page 4

post #31 of 42
Quote:
Originally Posted by blackalphabet View Post
yes my room temperature has raised. im never home until around 6:00 PM when it cools down a bit, and i turn on my tower fan to air out my room.

even at midnight, when all is cool . im still idling at 40C

i put a dime size drop on the middle of my CPU and dropped the heatsink on top of it.
I'm really surprised nobody has mentioned this yet, but HDT coolers have a slightly different application method for thermal paste than standard coolers with the heat pipes being direct contact(hence HDT).

Follow this guide when you reapply your thermal paste.

http://benchmarkreviews.com/index.ph...1&limitstart=5
Eclipse
(20 items)
 
Sager NP8652
(12 items)
 
 
CPUMotherboardGraphicsGraphics
Phenom II 980 @ 3.9ghz ASUS M2N-SLI Deluxe MSI GTX 560 Ti 448 Twin Frozr @ 850mhz EVGA GT 620 
RAMHard DriveHard DriveOptical Drive
8GB OCZ DDR2 1066 Crucial M500 480GB 2x Western Digital 640GB Sony Optiarc AD-7241S-0B 
CoolingOSMonitorMonitor
Xigmatek Dark Knight - push/pull w/ tape mod Windows 7 Pro x64 AOC i2353 23.5" Element ELEFW408 40" 
KeyboardPowerCaseMouse
Sentey Cobalt Pro Corsair 750TX Cooler Master Centurion Razer Mamba (3.5G) 
Mouse PadAudioAudioAudio
SteelSeries QCK Mini Creative X-Fi XtremeGamer Steelseries Siberia V2 Logitech X540 
CPUMotherboardGraphicsRAM
Intel Core i7 4720HQ P65_P67SG Nvidia GTX 980M 16GB DDR3 1600mhz 
Hard DriveHard DriveOSMonitor
Crucial MX100 512GB 500GB HDD Windows 7 x64 Home AOC Q3277FQE 
KeyboardMouseMouse PadAudio
Sentey Cobalt Pro Mionix Naos 7000 Steelseries QK Mini Steelseries Arctis 3 
  hide details  
Reply
Eclipse
(20 items)
 
Sager NP8652
(12 items)
 
 
CPUMotherboardGraphicsGraphics
Phenom II 980 @ 3.9ghz ASUS M2N-SLI Deluxe MSI GTX 560 Ti 448 Twin Frozr @ 850mhz EVGA GT 620 
RAMHard DriveHard DriveOptical Drive
8GB OCZ DDR2 1066 Crucial M500 480GB 2x Western Digital 640GB Sony Optiarc AD-7241S-0B 
CoolingOSMonitorMonitor
Xigmatek Dark Knight - push/pull w/ tape mod Windows 7 Pro x64 AOC i2353 23.5" Element ELEFW408 40" 
KeyboardPowerCaseMouse
Sentey Cobalt Pro Corsair 750TX Cooler Master Centurion Razer Mamba (3.5G) 
Mouse PadAudioAudioAudio
SteelSeries QCK Mini Creative X-Fi XtremeGamer Steelseries Siberia V2 Logitech X540 
CPUMotherboardGraphicsRAM
Intel Core i7 4720HQ P65_P67SG Nvidia GTX 980M 16GB DDR3 1600mhz 
Hard DriveHard DriveOSMonitor
Crucial MX100 512GB 500GB HDD Windows 7 x64 Home AOC Q3277FQE 
KeyboardMouseMouse PadAudio
Sentey Cobalt Pro Mionix Naos 7000 Steelseries QK Mini Steelseries Arctis 3 
  hide details  
Reply
post #32 of 42
Thread Starter 
Quote:
Originally Posted by Fossil View Post
I'm really surprised nobody has mentioned this yet, but HDT coolers have a slightly different application method for thermal paste than standard coolers with the heat pipes being direct contact(hence HDT).

Follow this guide when you reapply your thermal paste.

http://benchmarkreviews.com/index.ph...1&limitstart=5
would i need to put a drop on the CPU itself as well ?

or just apply it to the pipes and spread it with my rubber gloves?
    
CPUMotherboardGraphicsRAM
AMD Phenom II x4 955 Black Edition OC @ 3.8 Gigabyte 890FXA-UD5 EVGA GTX 560ti 4GB G.SKILL ECO Series F3-12800CL7D-4GBECO 
Hard DriveOptical DriveOSMonitor
Crucial C300 64GB | Samsung F3 1TB 7200rpm LITE-ON Black 24X DVD/CD Windows 7 Ultimate 64-bit Asus VH238H | LG W2353V 
PowerCaseMouse
Corsair HX650w Thermaltake Element G Logitech MX518 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD Phenom II x4 955 Black Edition OC @ 3.8 Gigabyte 890FXA-UD5 EVGA GTX 560ti 4GB G.SKILL ECO Series F3-12800CL7D-4GBECO 
Hard DriveOptical DriveOSMonitor
Crucial C300 64GB | Samsung F3 1TB 7200rpm LITE-ON Black 24X DVD/CD Windows 7 Ultimate 64-bit Asus VH238H | LG W2353V 
PowerCaseMouse
Corsair HX650w Thermaltake Element G Logitech MX518 
  hide details  
Reply
post #33 of 42
i put a little bit of thermal paste on each copper pipe. Then after you put the thermal paste on just put the cooler on the cpu and push down. After pushing down a little bit (30 seconds) keep pressure on the cpu and start to screw the cooler in. Check the pic below for an example how i put my thermal paste. NOT TOO MUCH! Just a tad bit
post #34 of 42
Quote:
Originally Posted by blackalphabet View Post
would i need to put a drop on the CPU itself as well ?

or just apply it to the pipes and spread it with my rubber gloves?
No, just apply it to the CPU cooler and let it spread when you mount it on the CPU. Do not spread it with your fingers.
Eclipse
(20 items)
 
Sager NP8652
(12 items)
 
 
CPUMotherboardGraphicsGraphics
Phenom II 980 @ 3.9ghz ASUS M2N-SLI Deluxe MSI GTX 560 Ti 448 Twin Frozr @ 850mhz EVGA GT 620 
RAMHard DriveHard DriveOptical Drive
8GB OCZ DDR2 1066 Crucial M500 480GB 2x Western Digital 640GB Sony Optiarc AD-7241S-0B 
CoolingOSMonitorMonitor
Xigmatek Dark Knight - push/pull w/ tape mod Windows 7 Pro x64 AOC i2353 23.5" Element ELEFW408 40" 
KeyboardPowerCaseMouse
Sentey Cobalt Pro Corsair 750TX Cooler Master Centurion Razer Mamba (3.5G) 
Mouse PadAudioAudioAudio
SteelSeries QCK Mini Creative X-Fi XtremeGamer Steelseries Siberia V2 Logitech X540 
CPUMotherboardGraphicsRAM
Intel Core i7 4720HQ P65_P67SG Nvidia GTX 980M 16GB DDR3 1600mhz 
Hard DriveHard DriveOSMonitor
Crucial MX100 512GB 500GB HDD Windows 7 x64 Home AOC Q3277FQE 
KeyboardMouseMouse PadAudio
Sentey Cobalt Pro Mionix Naos 7000 Steelseries QK Mini Steelseries Arctis 3 
  hide details  
Reply
Eclipse
(20 items)
 
Sager NP8652
(12 items)
 
 
CPUMotherboardGraphicsGraphics
Phenom II 980 @ 3.9ghz ASUS M2N-SLI Deluxe MSI GTX 560 Ti 448 Twin Frozr @ 850mhz EVGA GT 620 
RAMHard DriveHard DriveOptical Drive
8GB OCZ DDR2 1066 Crucial M500 480GB 2x Western Digital 640GB Sony Optiarc AD-7241S-0B 
CoolingOSMonitorMonitor
Xigmatek Dark Knight - push/pull w/ tape mod Windows 7 Pro x64 AOC i2353 23.5" Element ELEFW408 40" 
KeyboardPowerCaseMouse
Sentey Cobalt Pro Corsair 750TX Cooler Master Centurion Razer Mamba (3.5G) 
Mouse PadAudioAudioAudio
SteelSeries QCK Mini Creative X-Fi XtremeGamer Steelseries Siberia V2 Logitech X540 
CPUMotherboardGraphicsRAM
Intel Core i7 4720HQ P65_P67SG Nvidia GTX 980M 16GB DDR3 1600mhz 
Hard DriveHard DriveOSMonitor
Crucial MX100 512GB 500GB HDD Windows 7 x64 Home AOC Q3277FQE 
KeyboardMouseMouse PadAudio
Sentey Cobalt Pro Mionix Naos 7000 Steelseries QK Mini Steelseries Arctis 3 
  hide details  
Reply
post #35 of 42
Quote:
Originally Posted by blackalphabet View Post
yes my room temperature has raised. im never home until around 6:00 PM when it cools down a bit, and i turn on my tower fan to air out my room.

even at midnight, when all is cool . im still idling at 40C

i put a dime size drop on the middle of my CPU and dropped the heatsink on top of it.
Too much. You need only a bb sized amount. Clean with isoprop and use a smaller amount.
post #36 of 42
Quote:
Originally Posted by jach11 View Post
i put a little bit of thermal paste on each copper pipe. Then after you put the thermal paste on just put the cooler on the cpu and push down. After pushing down a little bit (30 seconds) keep pressure on the cpu and start to screw the cooler in. Check the pic below for an example how i put my thermal paste. NOT TOO MUCH! Just a tad bit
No no no. It is supposed to be applied on the metal portion of the cooler, not the pipes themselves. That would create too much spread and it would go all over the place.
Eclipse
(20 items)
 
Sager NP8652
(12 items)
 
 
CPUMotherboardGraphicsGraphics
Phenom II 980 @ 3.9ghz ASUS M2N-SLI Deluxe MSI GTX 560 Ti 448 Twin Frozr @ 850mhz EVGA GT 620 
RAMHard DriveHard DriveOptical Drive
8GB OCZ DDR2 1066 Crucial M500 480GB 2x Western Digital 640GB Sony Optiarc AD-7241S-0B 
CoolingOSMonitorMonitor
Xigmatek Dark Knight - push/pull w/ tape mod Windows 7 Pro x64 AOC i2353 23.5" Element ELEFW408 40" 
KeyboardPowerCaseMouse
Sentey Cobalt Pro Corsair 750TX Cooler Master Centurion Razer Mamba (3.5G) 
Mouse PadAudioAudioAudio
SteelSeries QCK Mini Creative X-Fi XtremeGamer Steelseries Siberia V2 Logitech X540 
CPUMotherboardGraphicsRAM
Intel Core i7 4720HQ P65_P67SG Nvidia GTX 980M 16GB DDR3 1600mhz 
Hard DriveHard DriveOSMonitor
Crucial MX100 512GB 500GB HDD Windows 7 x64 Home AOC Q3277FQE 
KeyboardMouseMouse PadAudio
Sentey Cobalt Pro Mionix Naos 7000 Steelseries QK Mini Steelseries Arctis 3 
  hide details  
Reply
Eclipse
(20 items)
 
Sager NP8652
(12 items)
 
 
CPUMotherboardGraphicsGraphics
Phenom II 980 @ 3.9ghz ASUS M2N-SLI Deluxe MSI GTX 560 Ti 448 Twin Frozr @ 850mhz EVGA GT 620 
RAMHard DriveHard DriveOptical Drive
8GB OCZ DDR2 1066 Crucial M500 480GB 2x Western Digital 640GB Sony Optiarc AD-7241S-0B 
CoolingOSMonitorMonitor
Xigmatek Dark Knight - push/pull w/ tape mod Windows 7 Pro x64 AOC i2353 23.5" Element ELEFW408 40" 
KeyboardPowerCaseMouse
Sentey Cobalt Pro Corsair 750TX Cooler Master Centurion Razer Mamba (3.5G) 
Mouse PadAudioAudioAudio
SteelSeries QCK Mini Creative X-Fi XtremeGamer Steelseries Siberia V2 Logitech X540 
CPUMotherboardGraphicsRAM
Intel Core i7 4720HQ P65_P67SG Nvidia GTX 980M 16GB DDR3 1600mhz 
Hard DriveHard DriveOSMonitor
Crucial MX100 512GB 500GB HDD Windows 7 x64 Home AOC Q3277FQE 
KeyboardMouseMouse PadAudio
Sentey Cobalt Pro Mionix Naos 7000 Steelseries QK Mini Steelseries Arctis 3 
  hide details  
Reply
post #37 of 42
Quote:
Originally Posted by Fossil View Post
No no no. It is supposed to be applied on the metal portion of the cooler, not the pipes themselves. That would create too much spread and it would go all over the place.
It could work if you put it on each pipe. Obviously put less paste for each pipe.
post #38 of 42
Quote:
Originally Posted by Riou View Post
It could work if you put it on each pipe. Obviously put less paste for each pipe.
i put a little bit more on the picture just so that op could see it. In real life you put very little. I stated that in my post.
post #39 of 42
Idling at 50C, couldn't give a **** sense I dont go over 80 on load.
justmypc
(14 items)
 
  
CPUMotherboardGraphicsRAM
7700K @ 5.0 1.35V Asus Z170-A Gigabyte G1 1080 2x8GB Kingston 3000Mhz 15-17-17 
Hard DriveOptical DriveOSMonitor
Samsung 850 500GB Samsung Spinpoint F3 1TB Win 10 x64 Pro BenQ XL2411T 
KeyboardPowerCaseMouse
Blackstorm Mech Brown Corsair AX850 HAF 932 Mionix Naos 7000 
Mouse PadAudio
SteelSeries Qck+ Xonar DG 
  hide details  
Reply
justmypc
(14 items)
 
  
CPUMotherboardGraphicsRAM
7700K @ 5.0 1.35V Asus Z170-A Gigabyte G1 1080 2x8GB Kingston 3000Mhz 15-17-17 
Hard DriveOptical DriveOSMonitor
Samsung 850 500GB Samsung Spinpoint F3 1TB Win 10 x64 Pro BenQ XL2411T 
KeyboardPowerCaseMouse
Blackstorm Mech Brown Corsair AX850 HAF 932 Mionix Naos 7000 
Mouse PadAudio
SteelSeries Qck+ Xonar DG 
  hide details  
Reply
post #40 of 42
Thread Starter 
Quote:
Originally Posted by Antsu View Post
Idling at 50C, couldn't give a **** sense I dont go over 80 on load.
you with the Intel chip , built for that kind of temperature
dont get your panties up in a wad with your **** sense you dont go over 80 on load.

AMD chip shouldnt go past 55-60 on load .
i'd say you drop them panties and grab that bottle of lube next to you .



i'll apply BB size TIM onto the pipes and push down with all my might onto the cpu and then tighten the thing, from there, i'll see if my temperatures changes, if it does then whooopee. if it doesnt. H80 here i come =]
    
CPUMotherboardGraphicsRAM
AMD Phenom II x4 955 Black Edition OC @ 3.8 Gigabyte 890FXA-UD5 EVGA GTX 560ti 4GB G.SKILL ECO Series F3-12800CL7D-4GBECO 
Hard DriveOptical DriveOSMonitor
Crucial C300 64GB | Samsung F3 1TB 7200rpm LITE-ON Black 24X DVD/CD Windows 7 Ultimate 64-bit Asus VH238H | LG W2353V 
PowerCaseMouse
Corsair HX650w Thermaltake Element G Logitech MX518 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD Phenom II x4 955 Black Edition OC @ 3.8 Gigabyte 890FXA-UD5 EVGA GTX 560ti 4GB G.SKILL ECO Series F3-12800CL7D-4GBECO 
Hard DriveOptical DriveOSMonitor
Crucial C300 64GB | Samsung F3 1TB 7200rpm LITE-ON Black 24X DVD/CD Windows 7 Ultimate 64-bit Asus VH238H | LG W2353V 
PowerCaseMouse
Corsair HX650w Thermaltake Element G Logitech MX518 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Air Cooling
Overclock.net › Forums › Cooling › Air Cooling › Hyper 212+ temps 10C increase on idle