Overclock.net › Forums › Intel › Intel CPUs › [Solved]Really Hot CPU new install - Help needed
New Posts  All Forums:Forum Nav:

[Solved]Really Hot CPU new install - Help needed

post #1 of 15
Thread Starter 
So i just got my rig fired up for the first time. seems like problems already. first it seems like my gtx260 just crapped the bed. so i throw in a old x300 ati card. i manage to get to my first boot up screen.

Right away i get a cpu over heat warning. i hit the f1 for bios and about fell over. Im using a stock heat sink. and the temp said 97c/206f immediatly i shut down. i take a lot at the heat sink and its it seated firmly. i did notice the cpu was only running at like 1.0x volts. Ive never used an UEFI before so its all still new to me. Im curios. how accurate is the stock bios as far as temps is there auto shutdown feature in the bios that will kill the system at a certain temp? what are the odds the cpu could have a bad temp censor.

motherboard asus p8p65-deluxe
cpu intel 2600k
ram g-skill rip jaws 2x4 1866.

i have not pulled the heat sink and reseated it yet. id had to take that step if there is some know issue. I dont really have the resources to put the search effort into it tonight. ive got a few minutes here and there to check the internet.

Thanks in advance for any info you can shed on the situation. By the way im sure its been covered. but whats the max safe temp on these cpus ?
Edited by Trippen Out - 7/28/11 at 3:47am
    
CPUMotherboardGraphicsRAM
Intel I7 2600k Asus p8p67-Deluxe Zotac GTX780 6GB OC G-skill Ripjaws 1866 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 EVO 250 Samsung EVO 120 Western Digital 1TB Black Lite On 20x DVD RW 
CoolingOSOSOS
XSPC RayStorm + 360Extreme Rad Arch Linux Windows 8.1 x64 WindowsRE 
MonitorKeyboardPowerCase
Asus PB278Q ThermalTake Meka G1 Evga SuperNova 1000 P2 Xigmatek Elysium 
MouseMouse PadAudio
Logitec G500 Gaming Mouse Ultra Pad Fiio E-17 + ATH-M50 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel I7 2600k Asus p8p67-Deluxe Zotac GTX780 6GB OC G-skill Ripjaws 1866 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 EVO 250 Samsung EVO 120 Western Digital 1TB Black Lite On 20x DVD RW 
CoolingOSOSOS
XSPC RayStorm + 360Extreme Rad Arch Linux Windows 8.1 x64 WindowsRE 
MonitorKeyboardPowerCase
Asus PB278Q ThermalTake Meka G1 Evga SuperNova 1000 P2 Xigmatek Elysium 
MouseMouse PadAudio
Logitec G500 Gaming Mouse Ultra Pad Fiio E-17 + ATH-M50 
  hide details  
Reply
post #2 of 15
When you touched the heatsink, was it really hot? If it was, that means the CPU is actually overheating.
Did you make sure you had all the pins turned and seated in the holes?

I have the same CPU/Motherboard. Default vcore is 1.196 (well for me).
Compooter
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600k ASUS P8P67 Deluxe Sapphire HD 6970 G.Skill DDR3 16 GB 
Hard DriveHard DriveCoolingOS
Seagate 1 TB Seagate 1 TB Thermalright HR01-Plus Windows 8 Professional 
MonitorPowerCaseMouse
Acer G245HQ Antec BP550Plus CORSAIR CARBIDE 200R Logitech G400 
Audio
JVC HA-RX500 
  hide details  
Reply
Compooter
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600k ASUS P8P67 Deluxe Sapphire HD 6970 G.Skill DDR3 16 GB 
Hard DriveHard DriveCoolingOS
Seagate 1 TB Seagate 1 TB Thermalright HR01-Plus Windows 8 Professional 
MonitorPowerCaseMouse
Acer G245HQ Antec BP550Plus CORSAIR CARBIDE 200R Logitech G400 
Audio
JVC HA-RX500 
  hide details  
Reply
post #3 of 15
Reseat the cooler and reset the CMOS first. You might have an unlocked pin which has'nt been pushed properly inside the mobo hole.
:D
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 3570K [4.5ghz] Asus P8Z77 V-Pro Asus GTX 760 2X4gb Corsair XMS3 1600mhz 
Hard DriveHard DriveCoolingOS
WD Blue 1TB EZEX X 2 [RAID 0] [WD Black 640GB][2 X WD Blue 1TB EZEX] Corsair H80i Windows 7 64bit 
MonitorPowerCase
Dell Ultrasharp 23" Corsair CX430W v2 Corsair Graphite 600T 
  hide details  
Reply
:D
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 3570K [4.5ghz] Asus P8Z77 V-Pro Asus GTX 760 2X4gb Corsair XMS3 1600mhz 
Hard DriveHard DriveCoolingOS
WD Blue 1TB EZEX X 2 [RAID 0] [WD Black 640GB][2 X WD Blue 1TB EZEX] Corsair H80i Windows 7 64bit 
MonitorPowerCase
Dell Ultrasharp 23" Corsair CX430W v2 Corsair Graphite 600T 
  hide details  
Reply
post #4 of 15
I think you should reseat the heatsink. How did you apply the thermal paste? There is no way that a 2600k (a very cool chip as it is) reaches 97C at boot. Those temps can ruin the chip. Especially at 1.0x volts, it is very unusual to see temperatures that high.

Clean the thermal paste off the CPU, apply only one small dot-- it will spread.
Make sure to check that there isn't a plastic film over the area the CPU cooler contacts the 2600k.
post #5 of 15
Thread Starter 
no i didnt touch the heatsink. its stock thermal paste. i have some tx2 i think laying around. i didnt think they were supposed to get that hot. all pits are licked and secured into the motherboard.
    
CPUMotherboardGraphicsRAM
Intel I7 2600k Asus p8p67-Deluxe Zotac GTX780 6GB OC G-skill Ripjaws 1866 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 EVO 250 Samsung EVO 120 Western Digital 1TB Black Lite On 20x DVD RW 
CoolingOSOSOS
XSPC RayStorm + 360Extreme Rad Arch Linux Windows 8.1 x64 WindowsRE 
MonitorKeyboardPowerCase
Asus PB278Q ThermalTake Meka G1 Evga SuperNova 1000 P2 Xigmatek Elysium 
MouseMouse PadAudio
Logitec G500 Gaming Mouse Ultra Pad Fiio E-17 + ATH-M50 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel I7 2600k Asus p8p67-Deluxe Zotac GTX780 6GB OC G-skill Ripjaws 1866 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 EVO 250 Samsung EVO 120 Western Digital 1TB Black Lite On 20x DVD RW 
CoolingOSOSOS
XSPC RayStorm + 360Extreme Rad Arch Linux Windows 8.1 x64 WindowsRE 
MonitorKeyboardPowerCase
Asus PB278Q ThermalTake Meka G1 Evga SuperNova 1000 P2 Xigmatek Elysium 
MouseMouse PadAudio
Logitec G500 Gaming Mouse Ultra Pad Fiio E-17 + ATH-M50 
  hide details  
Reply
post #6 of 15
Just touch the side of it... to see if its hot. If it isn't, you have a faulty sensor. (Whether or not that may be on the motherboard or on the CPU idk).
Compooter
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600k ASUS P8P67 Deluxe Sapphire HD 6970 G.Skill DDR3 16 GB 
Hard DriveHard DriveCoolingOS
Seagate 1 TB Seagate 1 TB Thermalright HR01-Plus Windows 8 Professional 
MonitorPowerCaseMouse
Acer G245HQ Antec BP550Plus CORSAIR CARBIDE 200R Logitech G400 
Audio
JVC HA-RX500 
  hide details  
Reply
Compooter
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600k ASUS P8P67 Deluxe Sapphire HD 6970 G.Skill DDR3 16 GB 
Hard DriveHard DriveCoolingOS
Seagate 1 TB Seagate 1 TB Thermalright HR01-Plus Windows 8 Professional 
MonitorPowerCaseMouse
Acer G245HQ Antec BP550Plus CORSAIR CARBIDE 200R Logitech G400 
Audio
JVC HA-RX500 
  hide details  
Reply
post #7 of 15
Thread Starter 
so i pulled the heat sink. the TIM from the cooler wasnt even melted. it didnt even smear on the cpu you. i cleaned it off put some tx2 (seams really liquid like) on replaced the cooler. i noticed it was stubborn to mount. im still not sure i got good. the temps are better now. in the "bios" it boots up at around 54c and slowly rised to 60c.

I did manage to get my old version of windows 7 to boot. while it was freaking out from all the new hardware speed fan started up. it kept reading my temps at around 30c so im not sure what to beleive. the "bios" or speedfan.

ill tell ya what. i miss my waterblock already. air cooling is such a pain in the ass. ill keep toying with it. im guessing if i stay under 70c i should be okay. that appears to be some of the temps i see people reaching. ill check back later tonight for more input or sometime in the morning. ill be sure to rep accordingly. dont think i dont appreaciate the help. i just dont have to to hit the button right this second

thanks.

noticed the voltage was 1.15 this time
    
CPUMotherboardGraphicsRAM
Intel I7 2600k Asus p8p67-Deluxe Zotac GTX780 6GB OC G-skill Ripjaws 1866 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 EVO 250 Samsung EVO 120 Western Digital 1TB Black Lite On 20x DVD RW 
CoolingOSOSOS
XSPC RayStorm + 360Extreme Rad Arch Linux Windows 8.1 x64 WindowsRE 
MonitorKeyboardPowerCase
Asus PB278Q ThermalTake Meka G1 Evga SuperNova 1000 P2 Xigmatek Elysium 
MouseMouse PadAudio
Logitec G500 Gaming Mouse Ultra Pad Fiio E-17 + ATH-M50 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel I7 2600k Asus p8p67-Deluxe Zotac GTX780 6GB OC G-skill Ripjaws 1866 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 EVO 250 Samsung EVO 120 Western Digital 1TB Black Lite On 20x DVD RW 
CoolingOSOSOS
XSPC RayStorm + 360Extreme Rad Arch Linux Windows 8.1 x64 WindowsRE 
MonitorKeyboardPowerCase
Asus PB278Q ThermalTake Meka G1 Evga SuperNova 1000 P2 Xigmatek Elysium 
MouseMouse PadAudio
Logitec G500 Gaming Mouse Ultra Pad Fiio E-17 + ATH-M50 
  hide details  
Reply
post #8 of 15
Thread Starter 
so i managed to make it to my desktop with out my windows panicking after a complete platform change. here is a screen shot of what is essential idle status and speed fan temps.

i opened an old version of coretemp and it tried to shut down my pc right away saying i exceeded the tjmax. im sure the program is just dated. hell i had to get get a new version of cpuz just to se the cpu
    
CPUMotherboardGraphicsRAM
Intel I7 2600k Asus p8p67-Deluxe Zotac GTX780 6GB OC G-skill Ripjaws 1866 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 EVO 250 Samsung EVO 120 Western Digital 1TB Black Lite On 20x DVD RW 
CoolingOSOSOS
XSPC RayStorm + 360Extreme Rad Arch Linux Windows 8.1 x64 WindowsRE 
MonitorKeyboardPowerCase
Asus PB278Q ThermalTake Meka G1 Evga SuperNova 1000 P2 Xigmatek Elysium 
MouseMouse PadAudio
Logitec G500 Gaming Mouse Ultra Pad Fiio E-17 + ATH-M50 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel I7 2600k Asus p8p67-Deluxe Zotac GTX780 6GB OC G-skill Ripjaws 1866 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 EVO 250 Samsung EVO 120 Western Digital 1TB Black Lite On 20x DVD RW 
CoolingOSOSOS
XSPC RayStorm + 360Extreme Rad Arch Linux Windows 8.1 x64 WindowsRE 
MonitorKeyboardPowerCase
Asus PB278Q ThermalTake Meka G1 Evga SuperNova 1000 P2 Xigmatek Elysium 
MouseMouse PadAudio
Logitec G500 Gaming Mouse Ultra Pad Fiio E-17 + ATH-M50 
  hide details  
Reply
post #9 of 15
I still suspect that the heatsink must have not fit snugly at the first time. You reseated it and now the temps are better. And the paste will not spread over the CPU so fast if its a new build. It takes time
:D
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 3570K [4.5ghz] Asus P8Z77 V-Pro Asus GTX 760 2X4gb Corsair XMS3 1600mhz 
Hard DriveHard DriveCoolingOS
WD Blue 1TB EZEX X 2 [RAID 0] [WD Black 640GB][2 X WD Blue 1TB EZEX] Corsair H80i Windows 7 64bit 
MonitorPowerCase
Dell Ultrasharp 23" Corsair CX430W v2 Corsair Graphite 600T 
  hide details  
Reply
:D
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 3570K [4.5ghz] Asus P8Z77 V-Pro Asus GTX 760 2X4gb Corsair XMS3 1600mhz 
Hard DriveHard DriveCoolingOS
WD Blue 1TB EZEX X 2 [RAID 0] [WD Black 640GB][2 X WD Blue 1TB EZEX] Corsair H80i Windows 7 64bit 
MonitorPowerCase
Dell Ultrasharp 23" Corsair CX430W v2 Corsair Graphite 600T 
  hide details  
Reply
post #10 of 15
Just wondering... what are your ambient temperatures? (noticed that 81 °F)

Intel stock cooler is pretty terrible.
Compooter
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600k ASUS P8P67 Deluxe Sapphire HD 6970 G.Skill DDR3 16 GB 
Hard DriveHard DriveCoolingOS
Seagate 1 TB Seagate 1 TB Thermalright HR01-Plus Windows 8 Professional 
MonitorPowerCaseMouse
Acer G245HQ Antec BP550Plus CORSAIR CARBIDE 200R Logitech G400 
Audio
JVC HA-RX500 
  hide details  
Reply
Compooter
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600k ASUS P8P67 Deluxe Sapphire HD 6970 G.Skill DDR3 16 GB 
Hard DriveHard DriveCoolingOS
Seagate 1 TB Seagate 1 TB Thermalright HR01-Plus Windows 8 Professional 
MonitorPowerCaseMouse
Acer G245HQ Antec BP550Plus CORSAIR CARBIDE 200R Logitech G400 
Audio
JVC HA-RX500 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Solved]Really Hot CPU new install - Help needed