post #1 of 1
Thread Starter 
Recently the ATI 4670 I was using died on me, so I had to resort to an 8800GTS I had lying around. I'm connected through DVI from the card to the HDMI ports on my Sanyo LCD. As such, I get no video signal on any of the HDMI ports until windows loads. Upon loading, The native resolution under PC is detected at 1024x768. The maximum resolution I can get under HD/SD is 1080i @ 59Hz. My TV runs a native resolution of 1080p 1920x1080 @ 60Hz. In addition, when I turn off the TV I get the windows hardware disconnect notice, and the same when I turn the TV back on (Detected new hardware). I've never had a problem like this from a video card. I do get video during bios through VGA.

I'll be ordering 3x EVGA SuperClocked GTX 580's next month. As for now, this is driving me crazy.


Current driver version: 275.33

Setup:

Asus Maximus IV Extreme
Intel Core i7 2600k
16gb Corsair Vengeance DDR3
Antec HCP-1200 PSU
4x WD Black 2TB Drives
Sanyo 42" 1080p LCD (DP42840)

Thanks in advance for any help.
Malice
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600K @ 4.6GHz Asus Maximus IV Extreme MSI Lightning Xtreme SLI 16gb Corsair Vengeance LP 
Hard DriveOSKeyboardPower
2x Crucual M4 128gb, 4x WD Black 2tb Windows 7 Ultimate x64 Saitek Cyborg Antec HCP-1200 
CaseMouse
CoolerMaster HAF-X Razer Lachesis Banshee Red 
  hide details  
Reply
Malice
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600K @ 4.6GHz Asus Maximus IV Extreme MSI Lightning Xtreme SLI 16gb Corsair Vengeance LP 
Hard DriveOSKeyboardPower
2x Crucual M4 128gb, 4x WD Black 2tb Windows 7 Ultimate x64 Saitek Cyborg Antec HCP-1200 
CaseMouse
CoolerMaster HAF-X Razer Lachesis Banshee Red 
  hide details  
Reply