Here you go, final post from the other forum:
Hi guys case arrived finally on Friday and after an epic 2 day build I have some photos to share of the case as it arrived and with my bits in it. The build was epic as I have a very bizarre motherboard which necessitates having to take the cmos battery out every time I change a component on my board else the damn thing doesn't start and spent a while trying to diagnose a nic problem as the bios cannot even find my onboard.....
Anyway one thing about this case the build quality puts my last lian li to shame which compared to this feels like a tin can. The alu is seriously thick in this case feels twice as dense as the lian li.
Size wise its not as high nor as deep as my 700d obviously it;s wider but I seriously was still struggling to find room for everything as you will see. Cable management was acceptable but to be honest trying to hide 14 fan wires, fan controller, 2 pumps, 8 sata cables and molex's ain't gonna be easy in any case.
Hard drive cages are excellent no vibrations whatsoever mounting for rads as you'd expect is perfect, one thing to note about the case though is that all holes a 6/32 unc so do not take standard fan screws, fortunately I have loads of rubber screws so used those instead.
Enjoy and ask any questions about the case if you have any as this is not really a build log, more a before and after.
Front of Case:
Rear of Case:
Some of the gear which went into it:
Mobo going in on Mobo Tray
Mobo Side Complete:
PSU side Complete:
And Front Complete: