Overclock.net › Forums › Cooling › Water Cooling › H100 and Antec 1200 case
New Posts  All Forums:Forum Nav:

H100 and Antec 1200 case - Page 4

post #31 of 85
Thread Starter 
Quote:
Originally Posted by andrewmchugh;14435565 
Put it in the drive bays as close to the top as you can. edit.. looked at pics uve made a fair job there.

You need some major cable management there man, that hurts to look at.

Got any suggestions or pics? I C ur setup is almost identical...
And this was during the installation and I didn't pay attention to wire management while doing so... That will be another seperate job where I get a lot more time and tools for drilling...
Gamer
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 @ 4GHZ Asus P6X58D-E 2X EVGA GTX 970 SC w/ACX 2.0 Cooler 6GB Corsair XMS3 CAS 7 1600Mhz 
Hard DriveCoolingOSMonitor
2X OCZ Vertex 30GB RAID 0 Corsair H100 Win 7 Ultimate 64-bit S23A950D + 55" LED 240Hz 
KeyboardPowerCaseMouse
Logitech G710+ Corsair AX 1200 Corsair Carbide Series Air 540 case Razor Deathadder 3500dpi 
  hide details  
Reply
Gamer
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 @ 4GHZ Asus P6X58D-E 2X EVGA GTX 970 SC w/ACX 2.0 Cooler 6GB Corsair XMS3 CAS 7 1600Mhz 
Hard DriveCoolingOSMonitor
2X OCZ Vertex 30GB RAID 0 Corsair H100 Win 7 Ultimate 64-bit S23A950D + 55" LED 240Hz 
KeyboardPowerCaseMouse
Logitech G710+ Corsair AX 1200 Corsair Carbide Series Air 540 case Razor Deathadder 3500dpi 
  hide details  
Reply
post #32 of 85
You think that cable management looks bad, you haven't seen mine yet. xD

My H100 is still on order, should arrive soonish. I've trawled around the internet to find that the H100 doesn't fit my Antec 1200, atleast not correctly. I have been diligently reading this thread and your stuggle with your case.
Just a quick question about top mounting the H100, as its probably going to be the path that I'll take;
As I've yet to take the top off mine yet, have you drilled / created holes in the top of the case to mount the Rad, and is the 200mm fan still functional. ^^

I'm still a noob to all this stuff, I know how to build a computer, and after that it gets hazy.. I just mess around until I get a setup I like xD

Edit: If you've just looked at my Animu rig, and think the temps are high.. Its partially bad air flow, due to only have 1 place I can actually fit my Comp atm.. >_>
I'll create an album later with some pictures of my problem xD
Edited by ShadowEW - 8/2/11 at 7:19am
 
Rena [A6-4400M]
(12 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II 1090T [4.46GHz @ 1.472v] Gigabyte GA 790FXTA-UD5 [35C Ambient] Sapphire HD 6950 [Unlocked 1030/1500] Kingston HyperX [4x4GB / 1785MHz] 
Hard DriveHard DriveOptical DriveCooling
Mushkin Chronos Enhanced SSD [240GB] 9TB Storage Pioneer DVR-219L Corsair H100 [39C Idle/52C Load] 
OSMonitorKeyboardPower
Windows 8 x64 BenQ VW2420H Razer Blackwidow Antec CP850 
CaseMouseMouse PadAudio
Antec Twelve Hundred Sharkoon Fireglider Roccat Taito / Steelseries QcK C-Media CMI8738-MX - Videologic ZXR-500 
AudioAudioOtherOther
Logitech G930 Shure SRH240A Wacom Bamboo Pen and Touch Logitech Webcam Pro 9000 HD 
Other
Blue Microphones Snowflake USB Microphone 
CPUMotherboardGraphicsRAM
AMD A6-4400M Samsung NP355V5C-A05UK AMD Radeon HD 7520G Corsair Vengeance 8GB 1866MHz 
Hard DriveOptical DriveOSMonitor
Samsung 830 Series 64 GB Super Multi Dual Layer Windows 7 Home Premium 15.6” HD LED Display 
KeyboardCaseMouseAudio
Built in Samsung 355V5C Touchpad 3W Stereo Speaker (1.5W x2) 
CPUMotherboardGraphicsGraphics
Intel i7-3930k C2 Gigabyte Ga-x79-up4 XFX HD7970 3GB DD OC XFX HD7970 3GB DD OC 
RAMHard DriveCoolingOS
Kingston 4x4GB Beast Series 2400MHz Mushkin Chronos Deluxe 240GB Corsair H100i Fedora 
PowerCaseAudioOther
XFX 850W Pro Series NZXT Phantom 630 White Creative Soundblaster Recon3D Fatal1ty Professi... Bitfenix Spectre Pro (200mm | Red) x4 
OtherOtherOtherOther
Bitfenix Alchemy 6Pin PCIe Extension (Orange/Bl... Bitfenix Alchemy Braided SATA Cable (Red/Black) x6 Bitfenix Spectre Pro (140mm | Red) x1 Bitfenix Spectre Pro (140mm | Orange) x3 
OtherOtherOtherOther
Bitfenix Spectre Pro (120mm | Orange) x1 Bitfenix Hydra (Spectre Pro LED Controller) x1 Bitfenix Alchemy 24Pin ATX Extension (Orange/Bl... Bitfenix Alchemy 8Pin EPS12V Extension (Orange/... 
Other
Bitfenix Alchemy 8Pin PCIe Extension (Orange/Bl... 
  hide details  
Reply
 
Rena [A6-4400M]
(12 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II 1090T [4.46GHz @ 1.472v] Gigabyte GA 790FXTA-UD5 [35C Ambient] Sapphire HD 6950 [Unlocked 1030/1500] Kingston HyperX [4x4GB / 1785MHz] 
Hard DriveHard DriveOptical DriveCooling
Mushkin Chronos Enhanced SSD [240GB] 9TB Storage Pioneer DVR-219L Corsair H100 [39C Idle/52C Load] 
OSMonitorKeyboardPower
Windows 8 x64 BenQ VW2420H Razer Blackwidow Antec CP850 
CaseMouseMouse PadAudio
Antec Twelve Hundred Sharkoon Fireglider Roccat Taito / Steelseries QcK C-Media CMI8738-MX - Videologic ZXR-500 
AudioAudioOtherOther
Logitech G930 Shure SRH240A Wacom Bamboo Pen and Touch Logitech Webcam Pro 9000 HD 
Other
Blue Microphones Snowflake USB Microphone 
CPUMotherboardGraphicsRAM
AMD A6-4400M Samsung NP355V5C-A05UK AMD Radeon HD 7520G Corsair Vengeance 8GB 1866MHz 
Hard DriveOptical DriveOSMonitor
Samsung 830 Series 64 GB Super Multi Dual Layer Windows 7 Home Premium 15.6” HD LED Display 
KeyboardCaseMouseAudio
Built in Samsung 355V5C Touchpad 3W Stereo Speaker (1.5W x2) 
CPUMotherboardGraphicsGraphics
Intel i7-3930k C2 Gigabyte Ga-x79-up4 XFX HD7970 3GB DD OC XFX HD7970 3GB DD OC 
RAMHard DriveCoolingOS
Kingston 4x4GB Beast Series 2400MHz Mushkin Chronos Deluxe 240GB Corsair H100i Fedora 
PowerCaseAudioOther
XFX 850W Pro Series NZXT Phantom 630 White Creative Soundblaster Recon3D Fatal1ty Professi... Bitfenix Spectre Pro (200mm | Red) x4 
OtherOtherOtherOther
Bitfenix Alchemy 6Pin PCIe Extension (Orange/Bl... Bitfenix Alchemy Braided SATA Cable (Red/Black) x6 Bitfenix Spectre Pro (140mm | Red) x1 Bitfenix Spectre Pro (140mm | Orange) x3 
OtherOtherOtherOther
Bitfenix Spectre Pro (120mm | Orange) x1 Bitfenix Hydra (Spectre Pro LED Controller) x1 Bitfenix Alchemy 24Pin ATX Extension (Orange/Bl... Bitfenix Alchemy 8Pin EPS12V Extension (Orange/... 
Other
Bitfenix Alchemy 8Pin PCIe Extension (Orange/Bl... 
  hide details  
Reply
post #33 of 85
Thread Starter 
Quote:
Originally Posted by ShadowEW;14435872 
You think that cable management looks bad, you haven't seen mine yet. xD

My H100 is still on order, should arrive soonish. I've trawled around the internet to find that the H100 doesn't fit my Antec 1200, atleast not correctly. I have been diligently reading this thread and your stuggle with your case.
Just a quick question about top mounting the H100, as its probably going to be the path that I'll take;
As I've yet to take the top off mine yet, have you drilled / created holes in the top of the case to mount the Rad, and is the 200mm fan still functional. ^^

I'm still a noob to all this stuff, I know how to build a computer, and after that it gets hazy.. I just mess around until I get a setup I like xD

Edit: If you've just looked at my Animu rig, and think the temps are high.. Its partially bad air flow, due to only have 1 place I can actually fit my Comp atm.. >_>
I'll create an album later with some pictures of my problem xD

I didn't drill any holes on the top... I mounted this securely as I could with two diagnal screws (red circles). I did have to add a washer to the bottom left screw(not in the pic)...
Keep in mind there is a ground wire that I screwed directly into the radiator(top right) as it originally was one of the screws that you have to take off while taking the entire top assembly off (10 screws total)...

With everything I did, the 200mm fan works properly but it is a little difficult to reach the mounting screws for the top case after the radiator is on...
img2648rv.jpg
Edited by Chris13002 - 8/2/11 at 7:48am
Gamer
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 @ 4GHZ Asus P6X58D-E 2X EVGA GTX 970 SC w/ACX 2.0 Cooler 6GB Corsair XMS3 CAS 7 1600Mhz 
Hard DriveCoolingOSMonitor
2X OCZ Vertex 30GB RAID 0 Corsair H100 Win 7 Ultimate 64-bit S23A950D + 55" LED 240Hz 
KeyboardPowerCaseMouse
Logitech G710+ Corsair AX 1200 Corsair Carbide Series Air 540 case Razor Deathadder 3500dpi 
  hide details  
Reply
Gamer
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 @ 4GHZ Asus P6X58D-E 2X EVGA GTX 970 SC w/ACX 2.0 Cooler 6GB Corsair XMS3 CAS 7 1600Mhz 
Hard DriveCoolingOSMonitor
2X OCZ Vertex 30GB RAID 0 Corsair H100 Win 7 Ultimate 64-bit S23A950D + 55" LED 240Hz 
KeyboardPowerCaseMouse
Logitech G710+ Corsair AX 1200 Corsair Carbide Series Air 540 case Razor Deathadder 3500dpi 
  hide details  
Reply
post #34 of 85
Ah, that's a much better view. Thanks :3

I think I might create a few more holes, I'm unkeen on the idea of 2 screws holding up the Rad and Fans. Not that I'm doubting the stregth in it, but it'll be in the back of my mind otherwise.
At the guess the 200mm fan no longer sits flush as normal, instead it rests on the rad? (This is all still a shot in the dark for me as I haven't taken my case apart, nor am I at home to try at this present moment in time) I'm tempted to keep the 200mm fan but add some spacers and drop the rad slightly.
 
Rena [A6-4400M]
(12 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II 1090T [4.46GHz @ 1.472v] Gigabyte GA 790FXTA-UD5 [35C Ambient] Sapphire HD 6950 [Unlocked 1030/1500] Kingston HyperX [4x4GB / 1785MHz] 
Hard DriveHard DriveOptical DriveCooling
Mushkin Chronos Enhanced SSD [240GB] 9TB Storage Pioneer DVR-219L Corsair H100 [39C Idle/52C Load] 
OSMonitorKeyboardPower
Windows 8 x64 BenQ VW2420H Razer Blackwidow Antec CP850 
CaseMouseMouse PadAudio
Antec Twelve Hundred Sharkoon Fireglider Roccat Taito / Steelseries QcK C-Media CMI8738-MX - Videologic ZXR-500 
AudioAudioOtherOther
Logitech G930 Shure SRH240A Wacom Bamboo Pen and Touch Logitech Webcam Pro 9000 HD 
Other
Blue Microphones Snowflake USB Microphone 
CPUMotherboardGraphicsRAM
AMD A6-4400M Samsung NP355V5C-A05UK AMD Radeon HD 7520G Corsair Vengeance 8GB 1866MHz 
Hard DriveOptical DriveOSMonitor
Samsung 830 Series 64 GB Super Multi Dual Layer Windows 7 Home Premium 15.6” HD LED Display 
KeyboardCaseMouseAudio
Built in Samsung 355V5C Touchpad 3W Stereo Speaker (1.5W x2) 
CPUMotherboardGraphicsGraphics
Intel i7-3930k C2 Gigabyte Ga-x79-up4 XFX HD7970 3GB DD OC XFX HD7970 3GB DD OC 
RAMHard DriveCoolingOS
Kingston 4x4GB Beast Series 2400MHz Mushkin Chronos Deluxe 240GB Corsair H100i Fedora 
PowerCaseAudioOther
XFX 850W Pro Series NZXT Phantom 630 White Creative Soundblaster Recon3D Fatal1ty Professi... Bitfenix Spectre Pro (200mm | Red) x4 
OtherOtherOtherOther
Bitfenix Alchemy 6Pin PCIe Extension (Orange/Bl... Bitfenix Alchemy Braided SATA Cable (Red/Black) x6 Bitfenix Spectre Pro (140mm | Red) x1 Bitfenix Spectre Pro (140mm | Orange) x3 
OtherOtherOtherOther
Bitfenix Spectre Pro (120mm | Orange) x1 Bitfenix Hydra (Spectre Pro LED Controller) x1 Bitfenix Alchemy 24Pin ATX Extension (Orange/Bl... Bitfenix Alchemy 8Pin EPS12V Extension (Orange/... 
Other
Bitfenix Alchemy 8Pin PCIe Extension (Orange/Bl... 
  hide details  
Reply
 
Rena [A6-4400M]
(12 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II 1090T [4.46GHz @ 1.472v] Gigabyte GA 790FXTA-UD5 [35C Ambient] Sapphire HD 6950 [Unlocked 1030/1500] Kingston HyperX [4x4GB / 1785MHz] 
Hard DriveHard DriveOptical DriveCooling
Mushkin Chronos Enhanced SSD [240GB] 9TB Storage Pioneer DVR-219L Corsair H100 [39C Idle/52C Load] 
OSMonitorKeyboardPower
Windows 8 x64 BenQ VW2420H Razer Blackwidow Antec CP850 
CaseMouseMouse PadAudio
Antec Twelve Hundred Sharkoon Fireglider Roccat Taito / Steelseries QcK C-Media CMI8738-MX - Videologic ZXR-500 
AudioAudioOtherOther
Logitech G930 Shure SRH240A Wacom Bamboo Pen and Touch Logitech Webcam Pro 9000 HD 
Other
Blue Microphones Snowflake USB Microphone 
CPUMotherboardGraphicsRAM
AMD A6-4400M Samsung NP355V5C-A05UK AMD Radeon HD 7520G Corsair Vengeance 8GB 1866MHz 
Hard DriveOptical DriveOSMonitor
Samsung 830 Series 64 GB Super Multi Dual Layer Windows 7 Home Premium 15.6” HD LED Display 
KeyboardCaseMouseAudio
Built in Samsung 355V5C Touchpad 3W Stereo Speaker (1.5W x2) 
CPUMotherboardGraphicsGraphics
Intel i7-3930k C2 Gigabyte Ga-x79-up4 XFX HD7970 3GB DD OC XFX HD7970 3GB DD OC 
RAMHard DriveCoolingOS
Kingston 4x4GB Beast Series 2400MHz Mushkin Chronos Deluxe 240GB Corsair H100i Fedora 
PowerCaseAudioOther
XFX 850W Pro Series NZXT Phantom 630 White Creative Soundblaster Recon3D Fatal1ty Professi... Bitfenix Spectre Pro (200mm | Red) x4 
OtherOtherOtherOther
Bitfenix Alchemy 6Pin PCIe Extension (Orange/Bl... Bitfenix Alchemy Braided SATA Cable (Red/Black) x6 Bitfenix Spectre Pro (140mm | Red) x1 Bitfenix Spectre Pro (140mm | Orange) x3 
OtherOtherOtherOther
Bitfenix Spectre Pro (120mm | Orange) x1 Bitfenix Hydra (Spectre Pro LED Controller) x1 Bitfenix Alchemy 24Pin ATX Extension (Orange/Bl... Bitfenix Alchemy 8Pin EPS12V Extension (Orange/... 
Other
Bitfenix Alchemy 8Pin PCIe Extension (Orange/Bl... 
  hide details  
Reply
post #35 of 85
Thread Starter 
Quote:
Originally Posted by ShadowEW;14436172 
Ah, that's a much better view. Thanks :3

I think I might create a few more holes, I'm unkeen on the idea of 2 screws holding up the Rad and Fans. Not that I'm doubting the stregth in it, but it'll be in the back of my mind otherwise.
At the guess the 200mm fan no longer sits flush as normal, instead it rests on the rad? (This is all still a shot in the dark for me as I haven't taken my case apart, nor am I at home to try at this present moment in time) I'm tempted to keep the 200mm fan but add some spacers and drop the rad slightly.

Yeah 2 screws worried me a little and drilling holes would probably be the best idea, but with this, the 200mm fan surprisingly sits perfectly down...

Keep in mind that bottom left screw is not even a hole, I used a washer to get a better grip so it's definitely not made for a perfect fit (better than zip ties)...
Also keep in mind if you plan on drilling like I did on the top right is a bit raised, so I used a torque screw driver to not damage/bent the casing...

But so far, no rattling, no space problems, very firm and nice cooling... wink.gif
Gamer
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 @ 4GHZ Asus P6X58D-E 2X EVGA GTX 970 SC w/ACX 2.0 Cooler 6GB Corsair XMS3 CAS 7 1600Mhz 
Hard DriveCoolingOSMonitor
2X OCZ Vertex 30GB RAID 0 Corsair H100 Win 7 Ultimate 64-bit S23A950D + 55" LED 240Hz 
KeyboardPowerCaseMouse
Logitech G710+ Corsair AX 1200 Corsair Carbide Series Air 540 case Razor Deathadder 3500dpi 
  hide details  
Reply
Gamer
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 @ 4GHZ Asus P6X58D-E 2X EVGA GTX 970 SC w/ACX 2.0 Cooler 6GB Corsair XMS3 CAS 7 1600Mhz 
Hard DriveCoolingOSMonitor
2X OCZ Vertex 30GB RAID 0 Corsair H100 Win 7 Ultimate 64-bit S23A950D + 55" LED 240Hz 
KeyboardPowerCaseMouse
Logitech G710+ Corsair AX 1200 Corsair Carbide Series Air 540 case Razor Deathadder 3500dpi 
  hide details  
Reply
post #36 of 85
Amazed on the 200mm fan still fitting flush. Thanks for the replies and sorry I can't offer you much advice. tongue.gif
I think I'll take the 2 fans off my A70 if that'll work. tongue.gif
I'll finally be able to fit a standard size fan into the window panel. Hurrah. The A70's fans, just, cover the window pannel mounting clips.

Any noticable noise from the fans? I used to have 2 fans near each other and because one was a few RPM higher I had a weird whistling / sucking sound.
 
Rena [A6-4400M]
(12 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II 1090T [4.46GHz @ 1.472v] Gigabyte GA 790FXTA-UD5 [35C Ambient] Sapphire HD 6950 [Unlocked 1030/1500] Kingston HyperX [4x4GB / 1785MHz] 
Hard DriveHard DriveOptical DriveCooling
Mushkin Chronos Enhanced SSD [240GB] 9TB Storage Pioneer DVR-219L Corsair H100 [39C Idle/52C Load] 
OSMonitorKeyboardPower
Windows 8 x64 BenQ VW2420H Razer Blackwidow Antec CP850 
CaseMouseMouse PadAudio
Antec Twelve Hundred Sharkoon Fireglider Roccat Taito / Steelseries QcK C-Media CMI8738-MX - Videologic ZXR-500 
AudioAudioOtherOther
Logitech G930 Shure SRH240A Wacom Bamboo Pen and Touch Logitech Webcam Pro 9000 HD 
Other
Blue Microphones Snowflake USB Microphone 
CPUMotherboardGraphicsRAM
AMD A6-4400M Samsung NP355V5C-A05UK AMD Radeon HD 7520G Corsair Vengeance 8GB 1866MHz 
Hard DriveOptical DriveOSMonitor
Samsung 830 Series 64 GB Super Multi Dual Layer Windows 7 Home Premium 15.6” HD LED Display 
KeyboardCaseMouseAudio
Built in Samsung 355V5C Touchpad 3W Stereo Speaker (1.5W x2) 
CPUMotherboardGraphicsGraphics
Intel i7-3930k C2 Gigabyte Ga-x79-up4 XFX HD7970 3GB DD OC XFX HD7970 3GB DD OC 
RAMHard DriveCoolingOS
Kingston 4x4GB Beast Series 2400MHz Mushkin Chronos Deluxe 240GB Corsair H100i Fedora 
PowerCaseAudioOther
XFX 850W Pro Series NZXT Phantom 630 White Creative Soundblaster Recon3D Fatal1ty Professi... Bitfenix Spectre Pro (200mm | Red) x4 
OtherOtherOtherOther
Bitfenix Alchemy 6Pin PCIe Extension (Orange/Bl... Bitfenix Alchemy Braided SATA Cable (Red/Black) x6 Bitfenix Spectre Pro (140mm | Red) x1 Bitfenix Spectre Pro (140mm | Orange) x3 
OtherOtherOtherOther
Bitfenix Spectre Pro (120mm | Orange) x1 Bitfenix Hydra (Spectre Pro LED Controller) x1 Bitfenix Alchemy 24Pin ATX Extension (Orange/Bl... Bitfenix Alchemy 8Pin EPS12V Extension (Orange/... 
Other
Bitfenix Alchemy 8Pin PCIe Extension (Orange/Bl... 
  hide details  
Reply
 
Rena [A6-4400M]
(12 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II 1090T [4.46GHz @ 1.472v] Gigabyte GA 790FXTA-UD5 [35C Ambient] Sapphire HD 6950 [Unlocked 1030/1500] Kingston HyperX [4x4GB / 1785MHz] 
Hard DriveHard DriveOptical DriveCooling
Mushkin Chronos Enhanced SSD [240GB] 9TB Storage Pioneer DVR-219L Corsair H100 [39C Idle/52C Load] 
OSMonitorKeyboardPower
Windows 8 x64 BenQ VW2420H Razer Blackwidow Antec CP850 
CaseMouseMouse PadAudio
Antec Twelve Hundred Sharkoon Fireglider Roccat Taito / Steelseries QcK C-Media CMI8738-MX - Videologic ZXR-500 
AudioAudioOtherOther
Logitech G930 Shure SRH240A Wacom Bamboo Pen and Touch Logitech Webcam Pro 9000 HD 
Other
Blue Microphones Snowflake USB Microphone 
CPUMotherboardGraphicsRAM
AMD A6-4400M Samsung NP355V5C-A05UK AMD Radeon HD 7520G Corsair Vengeance 8GB 1866MHz 
Hard DriveOptical DriveOSMonitor
Samsung 830 Series 64 GB Super Multi Dual Layer Windows 7 Home Premium 15.6” HD LED Display 
KeyboardCaseMouseAudio
Built in Samsung 355V5C Touchpad 3W Stereo Speaker (1.5W x2) 
CPUMotherboardGraphicsGraphics
Intel i7-3930k C2 Gigabyte Ga-x79-up4 XFX HD7970 3GB DD OC XFX HD7970 3GB DD OC 
RAMHard DriveCoolingOS
Kingston 4x4GB Beast Series 2400MHz Mushkin Chronos Deluxe 240GB Corsair H100i Fedora 
PowerCaseAudioOther
XFX 850W Pro Series NZXT Phantom 630 White Creative Soundblaster Recon3D Fatal1ty Professi... Bitfenix Spectre Pro (200mm | Red) x4 
OtherOtherOtherOther
Bitfenix Alchemy 6Pin PCIe Extension (Orange/Bl... Bitfenix Alchemy Braided SATA Cable (Red/Black) x6 Bitfenix Spectre Pro (140mm | Red) x1 Bitfenix Spectre Pro (140mm | Orange) x3 
OtherOtherOtherOther
Bitfenix Spectre Pro (120mm | Orange) x1 Bitfenix Hydra (Spectre Pro LED Controller) x1 Bitfenix Alchemy 24Pin ATX Extension (Orange/Bl... Bitfenix Alchemy 8Pin EPS12V Extension (Orange/... 
Other
Bitfenix Alchemy 8Pin PCIe Extension (Orange/Bl... 
  hide details  
Reply
post #37 of 85
Thread Starter 
Quote:
Originally Posted by ShadowEW;14436406 
Amazed on the 200mm fan still fitting flush. Thanks for the replies and sorry I can't offer you much advice. tongue.gif
I think I'll take the 2 fans off my A70 if that'll work. tongue.gif
I'll finally be able to fit a standard size fan into the window panel. Hurrah. The A70's fans, just, cover the window pannel mounting clips.

Any noticable noise from the fans? I used to have 2 fans near each other and because one was a few RPM higher I had a weird whistling / sucking sound.

NP, I learn something new from the site everyday...

The noise is just as it was without this cooler installed at low fan speeds...
When the computer first starts now, there is a very loud fan speed burst and these corsair fans do get loud (1300rpm to 2500rpm) compared to the much quieter tri-cools (1200-2000rpm)...

I even turn the 200mm fan all the way up and barely notice a difference... I prefer a quieter system and did purchase tri cools for the side and an extra one for my GPU's...
Gamer
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 @ 4GHZ Asus P6X58D-E 2X EVGA GTX 970 SC w/ACX 2.0 Cooler 6GB Corsair XMS3 CAS 7 1600Mhz 
Hard DriveCoolingOSMonitor
2X OCZ Vertex 30GB RAID 0 Corsair H100 Win 7 Ultimate 64-bit S23A950D + 55" LED 240Hz 
KeyboardPowerCaseMouse
Logitech G710+ Corsair AX 1200 Corsair Carbide Series Air 540 case Razor Deathadder 3500dpi 
  hide details  
Reply
Gamer
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 @ 4GHZ Asus P6X58D-E 2X EVGA GTX 970 SC w/ACX 2.0 Cooler 6GB Corsair XMS3 CAS 7 1600Mhz 
Hard DriveCoolingOSMonitor
2X OCZ Vertex 30GB RAID 0 Corsair H100 Win 7 Ultimate 64-bit S23A950D + 55" LED 240Hz 
KeyboardPowerCaseMouse
Logitech G710+ Corsair AX 1200 Corsair Carbide Series Air 540 case Razor Deathadder 3500dpi 
  hide details  
Reply
post #38 of 85
I am almost absolutly posotive that if you switched that h100 around so the tubes were on the bottom it would of screwed on properly .

I had that problem with my h50 in my 1200 on the top fan slot it would only fit with the tubes down the bottom because that part of the chamber is thicker than the other side .. it just wouldnt screw on properly , but turn it around and it does .

did u even try it ? i have the same case , im pretty sure you can screw that radiator there .. only with the tubes at the bottom .

Id make it fit , thats the spot for it .. 2 vertical fan slots in the rear for exhaust , perfect for a 240 rad .

squeeze it in .
Edited by Xristo - 8/2/11 at 8:49am
    
CPUMotherboardGraphicsRAM
Intel i5 7600k @ 5Ghz, 1.312v Asus Prime Z270-AR msi GTX 1080 32GB Corsair Vengeance DDR4 3Ghz 
Hard DriveCoolingOSMonitor
Transcend SSD220S 120GB  Corsair H80i V2 Windows 10 Pro 64bit AOC AG322FCX 32" Curved LED 144hz 1920x1080 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Antec Quattro 1000w Thermaltake Versa N27 msi Gaming series 
Mouse PadAudio
Razer Goliathus Steelseries Siberia V2  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i5 7600k @ 5Ghz, 1.312v Asus Prime Z270-AR msi GTX 1080 32GB Corsair Vengeance DDR4 3Ghz 
Hard DriveCoolingOSMonitor
Transcend SSD220S 120GB  Corsair H80i V2 Windows 10 Pro 64bit AOC AG322FCX 32" Curved LED 144hz 1920x1080 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Antec Quattro 1000w Thermaltake Versa N27 msi Gaming series 
Mouse PadAudio
Razer Goliathus Steelseries Siberia V2  
  hide details  
Reply
post #39 of 85
Thread Starter 
Quote:
Originally Posted by Xristo;14436593 
I am almost absolutly posotive that if you switched that h100 around so the tubes were on the bottom it would of screwed on properly .

I had that problem with my h50 in my 1200 on the top fan slot it would only fit with the tubes down the bottom because that part of the chamber is thicker than the other side .. it just wouldnt screw on properly , but turn it around and it does .

did u even try it ? i have the same case , im pretty sure you can screw that radiator there .. only with the tubes at the bottom .

Yes I definitely tried it... The ends without the tubes are a little shorter but I confirmed that it still DOES NOT fit correctly because there still is not enough clearance...

and it's about 1.5mm offset...

I even thought of bashing the top part of the case... but decided not to do any drilling/bending/damaging the case yet..... smile.gif

Also keep in mind, the radiator will not go flush against the case as it goes down to the PCI slots so you would either need spacers or extra push/pull fans...

I wish I took pics while I tried it, and bought this cooler thinking it would fit there, but yeah... doesn't fit, you can try or confirm with others... but i am not taking this thing apart again...
Edited by Chris13002 - 8/2/11 at 8:53am
Gamer
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 @ 4GHZ Asus P6X58D-E 2X EVGA GTX 970 SC w/ACX 2.0 Cooler 6GB Corsair XMS3 CAS 7 1600Mhz 
Hard DriveCoolingOSMonitor
2X OCZ Vertex 30GB RAID 0 Corsair H100 Win 7 Ultimate 64-bit S23A950D + 55" LED 240Hz 
KeyboardPowerCaseMouse
Logitech G710+ Corsair AX 1200 Corsair Carbide Series Air 540 case Razor Deathadder 3500dpi 
  hide details  
Reply
Gamer
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 970 @ 4GHZ Asus P6X58D-E 2X EVGA GTX 970 SC w/ACX 2.0 Cooler 6GB Corsair XMS3 CAS 7 1600Mhz 
Hard DriveCoolingOSMonitor
2X OCZ Vertex 30GB RAID 0 Corsair H100 Win 7 Ultimate 64-bit S23A950D + 55" LED 240Hz 
KeyboardPowerCaseMouse
Logitech G710+ Corsair AX 1200 Corsair Carbide Series Air 540 case Razor Deathadder 3500dpi 
  hide details  
Reply
post #40 of 85
Yeah you did good with mounting it uptop , i honestly always wanted a h100 so i can screw it there , it would look soo good !! lol but i guess i wont be getting one now .

Ill go 360 rad and throw it up front , take out the bays lol .

Keep in mind the antec 1200 was designed way before the h100 , we have the rev2 case .. maybe there will be a 3 for updates like this .

rev1 had problems mounting the h70 etc , fixed that with rev2 i think .. atleast thats what i heard . My h50 mounts perfectly in either of the fan bays .. thats why i thought u might of had a chance since it is pretty much the same rad just with more fins .. same chambers



Good luck man .
Edited by Xristo - 8/2/11 at 9:02am
    
CPUMotherboardGraphicsRAM
Intel i5 7600k @ 5Ghz, 1.312v Asus Prime Z270-AR msi GTX 1080 32GB Corsair Vengeance DDR4 3Ghz 
Hard DriveCoolingOSMonitor
Transcend SSD220S 120GB  Corsair H80i V2 Windows 10 Pro 64bit AOC AG322FCX 32" Curved LED 144hz 1920x1080 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Antec Quattro 1000w Thermaltake Versa N27 msi Gaming series 
Mouse PadAudio
Razer Goliathus Steelseries Siberia V2  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i5 7600k @ 5Ghz, 1.312v Asus Prime Z270-AR msi GTX 1080 32GB Corsair Vengeance DDR4 3Ghz 
Hard DriveCoolingOSMonitor
Transcend SSD220S 120GB  Corsair H80i V2 Windows 10 Pro 64bit AOC AG322FCX 32" Curved LED 144hz 1920x1080 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Antec Quattro 1000w Thermaltake Versa N27 msi Gaming series 
Mouse PadAudio
Razer Goliathus Steelseries Siberia V2  
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › H100 and Antec 1200 case