Originally Posted by Agavehound;14574876
I've noticed that you guys are mounting the H100 in the top with a PULL fan configuration. How would your temps be in a push? I know you wouldn't get as low of a temperature for the rad, but isn't the case airflow good enough to keep the temps down?
Heat naturally rises, but.. that being said the airflow in the case is fairly good. I have the 3 fans at the front pulling in air (and a fan mid/case/bay in the second), side fan pulling in air and the 2 rear fans exhausting.
So I'm pulling in air from the top, front and side, and that air is then being pushed to the back of the case via the front fans and exhausted / pulled straight back out using the rear 2. So, I'm hoping, that's drawing any warm out of the case fairly quickly.
Oh and my GPU also exhausts out of the back of the case, not inside. So that helps :3
@Undeadllama, I haven't forgotten about you, or the images. I'll try and get them up as soon as possible xD
@Nvidia-Brownies, I haven't tried and don't really fancy doing it either. I think I'll stick with in-case mounting
P.S. Fan is dremmeled, fits much better as it now slides back into place. >^^>