post #11 of 11
yes
AMD MUST conform to the intel spec

Anyway .
Here.. I 'll fish up something for you

The first question that may come to mind is why droop voltage at all. Truthfully, in most cases the designer may determine that a more cost-effective solution can be achieved by adding droop. Droop can help to reduce the output-voltage spike that results from fast load/current demand changes. The magnitude of the spike is proportional to the magnitude of the load swing and the ESR/ESL of the output capacitor(s) selected. By positioning the no-load voltage (VNL) level near the upper specification limit (bound by the Vccmin load line), a larger negative spike can be sustained without crossing the lower limit. By adding a well controlled output impedance (RLL), the output voltage under load can be effectively 'level shifted' down so that a larger positive spike can be sustained without crossing the upper specification limit (such as when the system suddenly leaves a heavy load condition). This makes sense as the heavier the CPU loading the smaller the potential negative spike and vice versa for lower CPU loading/positive spikes. The resulting system is one in which the system operation point is bound by Vccmin and Vccmax at all times (although short excursions above Vccmax are allowed by design).

HERE is the original article

From Anandtech :
If you've ever overclocked a system, chances are that at some point or another you've had opportunity to become upset with your Vdroop "problem." Some users, confused as to why their system refuses to exactly match actual processor supply voltage to the value specified in BIOS, are quick to blame the quality their motherboard; still others find fault with the difference noted between their board's idle and full-load processor supply voltages. Actually, load line droop (Vdroop) is an inherent part of any Intel power delivery design specification and serves an important role in maintaining system stability. In most cases, comments regarding unacceptable power delivery performance are completely unfounded. To make matters worse, unjustified negative consumer perception surrounding this often misunderstood design feature eventually forced a few motherboard manufacturers to respond to enthusiasts' demands for action by adding an option in their BIOS that effectively disables this important function.

Based on the currently running tasks, processor load can vary significantly during system operation. ....