Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › CM Centurion Mod help needed -painting/speakers
New Posts  All Forums:Forum Nav:

CM Centurion Mod help needed -painting/speakers

post #1 of 3
Thread Starter 
So I have a CM Centurion 5 with the side window...

http://www.newegg.com/Product/Produc...82E16811119077

A customer so graciously donated it so now its MOD TIME!

Total current task list...

-Interior Paint - gloss black?
-Exterior Paint - Open to ideas
-Using gutted desktop speakers on the bottom of the system and cutting a slot for them
-Dremelling an exhaust hole on top. (120 MM?)

If you have any ideas, particularly about the painting, I would really love them. I don't have a rivet gun so there is NO way of me truly disassembling the case to paint the interior properly so I need a way to make this happen in the cases current dismantled state!

Thanks for the ideas in advance, as they come in I'll be posting pics!
post #2 of 3
Link dont work.

Black is always good, but gloss paint shows fingerprints pretty well just a fyi

White looks good as a interior paint as does red.

speakers would be cool

I personally would cut 2 120mm holes for dual fans. I googled it power supply is on top might not fit 2 120mm holes with it there.

Use a good quality rattle can paint, less you have a paintgun then the sky is the limit

ive painted a case or 2 before, if you have a any questions pm me happy to help.
Edited by solar0987 - 7/30/11 at 6:20pm
post #3 of 3
Thread Starter 
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mods
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › CM Centurion Mod help needed -painting/speakers