Okay so after tweaking a bit i managed to get the PC to boot normally and not get the 3 beeps problem , What i did was lowering the HT Link Freq , However as soon as windows boot the PC automatically restarts .. So something must be wrong, I am gonna explain exactly my settings but here is the link for the bios again in case some of the stuff i am going to say makes no sense : http://imageshack.us/photo/my-images...082011001.jpg/
K, I set the :
CPU Frequency to 220 .. As 220 X 15 = 3.3Ghz
HT Link Frequency to 1.8Ghz .. While there are options that go from 200 Mhz to 2.0 Ghz , I really did not know what to set this to so i just tried 1.8Ghz , Which managed to get me past the 3 beeps problem that i used to get when leaving this to AUTO. But what should this be set to?
Memory Clock to x3.33 .. as 4.00 x 220 = 880 Mhz which was over the default 800 Mhz.
CPU Northbridge Freq. to x9 .. I Dont exactly know what this should be set it , Is the default NB freq = CPU FREQ x 10 or is it what PunkX explained as = 3 times the non multiplied ram clock ? the default Ram Clock for me is 800 Mhz , So what should this exactly be set to? Elaborate Please.
( And i have left the voltage to AUTO. )
So exactly what should i change to stop the PC from restarting itself and can someone elaborate a bit to me the HT link Freq and what it is supposed to be set to? Or maybe i need to change the voltage ? or the NB multiplier is the problem? or maybe some of the stuff that i did not touch should be changed? Help Please
-Thanks.Edited by Hitman47222 - 10/29/11 at 11:08am