Overclock.net › Forums › Intel › Intel Motherboards › Overclocking time
New Posts  All Forums:Forum Nav:

Overclocking time

post #1 of 38
Thread Starter 
I've decided to overclock my 2500k now. I using the stock cooler at the moment, but will change to my dark knight when I can. I want to see how high I can get without touching the voltages, that way heat wont be so much of a problem.

When i first set this board up it had problems posting (Would sometimes sit there with the VGA light on), but after I had windows all set up and went into the bios and put everything on auto, its fixed that.

I only have a basic idea of what some of these settings do, since my last overclock was on a p45. I want to know what I should set them to in order to get the best from it. I know that on sb chips you adjust the multi while not moving the BCLK (well, it can be moved slightly, but i wont bother).

Here are my current settings:

Stuff on auto: Vrm frequency, cpu offset voltage, dram volts, vccsa volts, vccio volts, cpu pll volts, pch volts, cpu spread spectrum, cpu ratio, ai overclock tuner, turbo ratio, internal pll overvoltage, mem frequency, epu setting, Load-line calibration.

disabled: VRM spread spec, virtualisation

enabled: fan control, EPU power saving mode

Standard: Phase control

Cpu voltage: Offset mode

Cpu current capabillity: 100%

The tpu and epu switches on the board are on, I dont really know what they do.

So where do I start? Do i start turning up the turbo multi and leave everything as it is, or should i change other things that will help gain more stability?

System specs are in sig. Only other things worth mentioning is my bios version (1305,need to update) and my memory, which is 1333mhz.
     
CPUMotherboardGraphicsRAM
Intel Core i5 2500k @ 4ghz Asus P8P67 pro Gigabyte GTX780 12GB Corsair RAM (2/3 vengance, 1/3 XMS3) 
Hard DriveHard DriveHard DriveOptical Drive
500gb Spinpoint f3 Samsung 840 EVO 120gb Seagate 7200.14 2tb Samsung dvd+-rw 
CoolingOSMonitorMonitor
Noctua NH-D14 Windows 7 ultimate x64 LG 24MP55 x2 LG 32LD450 
KeyboardPowerCaseMouse
Dell thing. Corsair TX650 Coolermaster cm690 Logitech G500 
Mouse PadAudioAudio
none Xonar DG and logitech X-540 Beyer DT770 PRO 
CPUMotherboardGraphicsRAM
AMD A6-4455m 2.1ghz Dual Covered in tea stains Radeon 7500G 6GB 
Hard DriveOptical DriveCoolingOS
SSD soon None Inadequate Win7 of course 
MonitorKeyboardCase
It's awful A bit meh, Bodged hinge repair (Nut and bolt through back ... 
CPUMotherboardGraphicsRAM
Celeron M 360 1.4ghz Packard bell easynote (lynx banias) Intel 855gm 768mb 
Hard DriveOptical DriveOSMonitor
50gb seagate Cd dvd combi XP sp3 15 
KeyboardPowerCaseMouse
one with buttons Brick It has one It has leds 
Mouse Pad
my lap or the chair 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel Core i5 2500k @ 4ghz Asus P8P67 pro Gigabyte GTX780 12GB Corsair RAM (2/3 vengance, 1/3 XMS3) 
Hard DriveHard DriveHard DriveOptical Drive
500gb Spinpoint f3 Samsung 840 EVO 120gb Seagate 7200.14 2tb Samsung dvd+-rw 
CoolingOSMonitorMonitor
Noctua NH-D14 Windows 7 ultimate x64 LG 24MP55 x2 LG 32LD450 
KeyboardPowerCaseMouse
Dell thing. Corsair TX650 Coolermaster cm690 Logitech G500 
Mouse PadAudioAudio
none Xonar DG and logitech X-540 Beyer DT770 PRO 
CPUMotherboardGraphicsRAM
AMD A6-4455m 2.1ghz Dual Covered in tea stains Radeon 7500G 6GB 
Hard DriveOptical DriveCoolingOS
SSD soon None Inadequate Win7 of course 
MonitorKeyboardCase
It's awful A bit meh, Bodged hinge repair (Nut and bolt through back ... 
CPUMotherboardGraphicsRAM
Celeron M 360 1.4ghz Packard bell easynote (lynx banias) Intel 855gm 768mb 
Hard DriveOptical DriveOSMonitor
50gb seagate Cd dvd combi XP sp3 15 
KeyboardPowerCaseMouse
one with buttons Brick It has one It has leds 
Mouse Pad
my lap or the chair 
  hide details  
Reply
post #2 of 38
Quote:
Originally Posted by alltoasters View Post
I've decided to overclock my 2500k now. I using the stock cooler at the moment, but will change to my dark knight when I can. I want to see how high I can get without touching the voltages, that way heat wont be so much of a problem.
Instead of the Dark Knight, I recommend getting a decent heatsink that has a flat base instead of HDT. I've noticed that flat-base heatsinks seem to work better for Sandy Bridge than HDT-base heatsinks.

Plus, it'll be easier to apply the thermal paste.


Quote:
Originally Posted by alltoasters View Post
When i first set this board up it had problems posting (Would sometimes sit there with the VGA light on), but after I had windows all set up and went into the bios and put everything on auto, its fixed that.

I only have a basic idea of what some of these settings do, since my last overclock was on a p45. I want to know what I should set them to in order to get the best from it. I know that on sb chips you adjust the multi while not moving the BCLK (well, it can be moved slightly, but i wont bother).

Here are my current settings:

Stuff on auto: Vrm frequency, cpu offset voltage, dram volts, vccsa volts, vccio volts, cpu pll volts, pch volts, cpu spread spectrum, cpu ratio, ai overclock tuner, turbo ratio, internal pll overvoltage, mem frequency, epu setting, Load-line calibration.

disabled: VRM spread spec, virtualisation

enabled: fan control, EPU power saving mode

Standard: Phase control

Cpu voltage: Offset mode

Cpu current capabillity: 100%

The tpu and epu switches on the board are on, I dont really know what they do.

So where do I start? Do i start turning up the turbo multi and leave everything as it is, or should i change other things that will help gain more stability?

System specs are in sig. Only other things worth mentioning is my bios version (1305,need to update) and my memory, which is 1333mhz.
First, turn the EPU and TPU switches to their Off positions.

After that, I recommend that you load the optimized defaults and then update to the latest BIOS. Immediately after that, load the optimized defaults again.

When you're done with this, we'll get into the fun!
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #3 of 38
Thread Starter 
Quote:
Originally Posted by TwoCables View Post
Instead of the Dark Knight, I recommend getting a decent heatsink that has a flat base instead of HDT. I've noticed that flat-base heatsinks seem to work better for Sandy Bridge than HDT-base heatsinks.

Plus, it'll be easier to apply the thermal paste.
I already have it left over from my old build, so wont get a new cooler. The reason I am on stock is because I didn't realise I had the 1156 bracket for it until after I installed the stock cooler. I am waiting for some thermal paste remover to get here. (I cant get anything like rubbing alcohol, so this will have to do.)


Quote:
First, turn the EPU and TPU switches to their Off positions.

After that, I recommend that you load the optimized defaults and then update to the latest BIOS. Immediately after that, load the optimized defaults again.

When you're done with this, we'll get into the fun!
OK, will do.
     
CPUMotherboardGraphicsRAM
Intel Core i5 2500k @ 4ghz Asus P8P67 pro Gigabyte GTX780 12GB Corsair RAM (2/3 vengance, 1/3 XMS3) 
Hard DriveHard DriveHard DriveOptical Drive
500gb Spinpoint f3 Samsung 840 EVO 120gb Seagate 7200.14 2tb Samsung dvd+-rw 
CoolingOSMonitorMonitor
Noctua NH-D14 Windows 7 ultimate x64 LG 24MP55 x2 LG 32LD450 
KeyboardPowerCaseMouse
Dell thing. Corsair TX650 Coolermaster cm690 Logitech G500 
Mouse PadAudioAudio
none Xonar DG and logitech X-540 Beyer DT770 PRO 
CPUMotherboardGraphicsRAM
AMD A6-4455m 2.1ghz Dual Covered in tea stains Radeon 7500G 6GB 
Hard DriveOptical DriveCoolingOS
SSD soon None Inadequate Win7 of course 
MonitorKeyboardCase
It's awful A bit meh, Bodged hinge repair (Nut and bolt through back ... 
CPUMotherboardGraphicsRAM
Celeron M 360 1.4ghz Packard bell easynote (lynx banias) Intel 855gm 768mb 
Hard DriveOptical DriveOSMonitor
50gb seagate Cd dvd combi XP sp3 15 
KeyboardPowerCaseMouse
one with buttons Brick It has one It has leds 
Mouse Pad
my lap or the chair 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel Core i5 2500k @ 4ghz Asus P8P67 pro Gigabyte GTX780 12GB Corsair RAM (2/3 vengance, 1/3 XMS3) 
Hard DriveHard DriveHard DriveOptical Drive
500gb Spinpoint f3 Samsung 840 EVO 120gb Seagate 7200.14 2tb Samsung dvd+-rw 
CoolingOSMonitorMonitor
Noctua NH-D14 Windows 7 ultimate x64 LG 24MP55 x2 LG 32LD450 
KeyboardPowerCaseMouse
Dell thing. Corsair TX650 Coolermaster cm690 Logitech G500 
Mouse PadAudioAudio
none Xonar DG and logitech X-540 Beyer DT770 PRO 
CPUMotherboardGraphicsRAM
AMD A6-4455m 2.1ghz Dual Covered in tea stains Radeon 7500G 6GB 
Hard DriveOptical DriveCoolingOS
SSD soon None Inadequate Win7 of course 
MonitorKeyboardCase
It's awful A bit meh, Bodged hinge repair (Nut and bolt through back ... 
CPUMotherboardGraphicsRAM
Celeron M 360 1.4ghz Packard bell easynote (lynx banias) Intel 855gm 768mb 
Hard DriveOptical DriveOSMonitor
50gb seagate Cd dvd combi XP sp3 15 
KeyboardPowerCaseMouse
one with buttons Brick It has one It has leds 
Mouse Pad
my lap or the chair 
  hide details  
Reply
post #4 of 38
Thread Starter 
Since changing to optimised defaults, It is doing the thing where it only starts about 1 time out of 5. It sits there with the vga led on and doesn't do anything during the 4 times out of 5 when it wont start. Doesn't turn the monitor on either. But on the old bios settings, it started every time without a problem.
Edited by alltoasters - 8/4/11 at 2:04pm
     
CPUMotherboardGraphicsRAM
Intel Core i5 2500k @ 4ghz Asus P8P67 pro Gigabyte GTX780 12GB Corsair RAM (2/3 vengance, 1/3 XMS3) 
Hard DriveHard DriveHard DriveOptical Drive
500gb Spinpoint f3 Samsung 840 EVO 120gb Seagate 7200.14 2tb Samsung dvd+-rw 
CoolingOSMonitorMonitor
Noctua NH-D14 Windows 7 ultimate x64 LG 24MP55 x2 LG 32LD450 
KeyboardPowerCaseMouse
Dell thing. Corsair TX650 Coolermaster cm690 Logitech G500 
Mouse PadAudioAudio
none Xonar DG and logitech X-540 Beyer DT770 PRO 
CPUMotherboardGraphicsRAM
AMD A6-4455m 2.1ghz Dual Covered in tea stains Radeon 7500G 6GB 
Hard DriveOptical DriveCoolingOS
SSD soon None Inadequate Win7 of course 
MonitorKeyboardCase
It's awful A bit meh, Bodged hinge repair (Nut and bolt through back ... 
CPUMotherboardGraphicsRAM
Celeron M 360 1.4ghz Packard bell easynote (lynx banias) Intel 855gm 768mb 
Hard DriveOptical DriveOSMonitor
50gb seagate Cd dvd combi XP sp3 15 
KeyboardPowerCaseMouse
one with buttons Brick It has one It has leds 
Mouse Pad
my lap or the chair 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel Core i5 2500k @ 4ghz Asus P8P67 pro Gigabyte GTX780 12GB Corsair RAM (2/3 vengance, 1/3 XMS3) 
Hard DriveHard DriveHard DriveOptical Drive
500gb Spinpoint f3 Samsung 840 EVO 120gb Seagate 7200.14 2tb Samsung dvd+-rw 
CoolingOSMonitorMonitor
Noctua NH-D14 Windows 7 ultimate x64 LG 24MP55 x2 LG 32LD450 
KeyboardPowerCaseMouse
Dell thing. Corsair TX650 Coolermaster cm690 Logitech G500 
Mouse PadAudioAudio
none Xonar DG and logitech X-540 Beyer DT770 PRO 
CPUMotherboardGraphicsRAM
AMD A6-4455m 2.1ghz Dual Covered in tea stains Radeon 7500G 6GB 
Hard DriveOptical DriveCoolingOS
SSD soon None Inadequate Win7 of course 
MonitorKeyboardCase
It's awful A bit meh, Bodged hinge repair (Nut and bolt through back ... 
CPUMotherboardGraphicsRAM
Celeron M 360 1.4ghz Packard bell easynote (lynx banias) Intel 855gm 768mb 
Hard DriveOptical DriveOSMonitor
50gb seagate Cd dvd combi XP sp3 15 
KeyboardPowerCaseMouse
one with buttons Brick It has one It has leds 
Mouse Pad
my lap or the chair 
  hide details  
Reply
post #5 of 38
Now that you have loaded the optimized defaults, flash to the latest BIOS.

Immediately following that, load the optimized defaults again.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #6 of 38
Thread Starter 
I've updated bios and loaded defaults, but am not sure if starting issue is there or not. It seems to be related either to the onboard controllers (none of which I need), settings for the oc tuner, or how it is started.
Edited by alltoasters - 8/4/11 at 2:30pm
     
CPUMotherboardGraphicsRAM
Intel Core i5 2500k @ 4ghz Asus P8P67 pro Gigabyte GTX780 12GB Corsair RAM (2/3 vengance, 1/3 XMS3) 
Hard DriveHard DriveHard DriveOptical Drive
500gb Spinpoint f3 Samsung 840 EVO 120gb Seagate 7200.14 2tb Samsung dvd+-rw 
CoolingOSMonitorMonitor
Noctua NH-D14 Windows 7 ultimate x64 LG 24MP55 x2 LG 32LD450 
KeyboardPowerCaseMouse
Dell thing. Corsair TX650 Coolermaster cm690 Logitech G500 
Mouse PadAudioAudio
none Xonar DG and logitech X-540 Beyer DT770 PRO 
CPUMotherboardGraphicsRAM
AMD A6-4455m 2.1ghz Dual Covered in tea stains Radeon 7500G 6GB 
Hard DriveOptical DriveCoolingOS
SSD soon None Inadequate Win7 of course 
MonitorKeyboardCase
It's awful A bit meh, Bodged hinge repair (Nut and bolt through back ... 
CPUMotherboardGraphicsRAM
Celeron M 360 1.4ghz Packard bell easynote (lynx banias) Intel 855gm 768mb 
Hard DriveOptical DriveOSMonitor
50gb seagate Cd dvd combi XP sp3 15 
KeyboardPowerCaseMouse
one with buttons Brick It has one It has leds 
Mouse Pad
my lap or the chair 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel Core i5 2500k @ 4ghz Asus P8P67 pro Gigabyte GTX780 12GB Corsair RAM (2/3 vengance, 1/3 XMS3) 
Hard DriveHard DriveHard DriveOptical Drive
500gb Spinpoint f3 Samsung 840 EVO 120gb Seagate 7200.14 2tb Samsung dvd+-rw 
CoolingOSMonitorMonitor
Noctua NH-D14 Windows 7 ultimate x64 LG 24MP55 x2 LG 32LD450 
KeyboardPowerCaseMouse
Dell thing. Corsair TX650 Coolermaster cm690 Logitech G500 
Mouse PadAudioAudio
none Xonar DG and logitech X-540 Beyer DT770 PRO 
CPUMotherboardGraphicsRAM
AMD A6-4455m 2.1ghz Dual Covered in tea stains Radeon 7500G 6GB 
Hard DriveOptical DriveCoolingOS
SSD soon None Inadequate Win7 of course 
MonitorKeyboardCase
It's awful A bit meh, Bodged hinge repair (Nut and bolt through back ... 
CPUMotherboardGraphicsRAM
Celeron M 360 1.4ghz Packard bell easynote (lynx banias) Intel 855gm 768mb 
Hard DriveOptical DriveOSMonitor
50gb seagate Cd dvd combi XP sp3 15 
KeyboardPowerCaseMouse
one with buttons Brick It has one It has leds 
Mouse Pad
my lap or the chair 
  hide details  
Reply
post #7 of 38
Quote:
Originally Posted by alltoasters View Post
I've updated bios and loaded defaults, but am not sure if starting issue is there or not.
Then it's probably not (the newer BIOS version probably fixed it).

So I think we can get started. However, I have just one more question: what voltage is your memory rated for?
Edited by TwoCables - 8/4/11 at 2:32pm
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #8 of 38
Thread Starter 
It is CMX4GX3M1A1333C9.

Corsair's site says it is 1.5v.
     
CPUMotherboardGraphicsRAM
Intel Core i5 2500k @ 4ghz Asus P8P67 pro Gigabyte GTX780 12GB Corsair RAM (2/3 vengance, 1/3 XMS3) 
Hard DriveHard DriveHard DriveOptical Drive
500gb Spinpoint f3 Samsung 840 EVO 120gb Seagate 7200.14 2tb Samsung dvd+-rw 
CoolingOSMonitorMonitor
Noctua NH-D14 Windows 7 ultimate x64 LG 24MP55 x2 LG 32LD450 
KeyboardPowerCaseMouse
Dell thing. Corsair TX650 Coolermaster cm690 Logitech G500 
Mouse PadAudioAudio
none Xonar DG and logitech X-540 Beyer DT770 PRO 
CPUMotherboardGraphicsRAM
AMD A6-4455m 2.1ghz Dual Covered in tea stains Radeon 7500G 6GB 
Hard DriveOptical DriveCoolingOS
SSD soon None Inadequate Win7 of course 
MonitorKeyboardCase
It's awful A bit meh, Bodged hinge repair (Nut and bolt through back ... 
CPUMotherboardGraphicsRAM
Celeron M 360 1.4ghz Packard bell easynote (lynx banias) Intel 855gm 768mb 
Hard DriveOptical DriveOSMonitor
50gb seagate Cd dvd combi XP sp3 15 
KeyboardPowerCaseMouse
one with buttons Brick It has one It has leds 
Mouse Pad
my lap or the chair 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel Core i5 2500k @ 4ghz Asus P8P67 pro Gigabyte GTX780 12GB Corsair RAM (2/3 vengance, 1/3 XMS3) 
Hard DriveHard DriveHard DriveOptical Drive
500gb Spinpoint f3 Samsung 840 EVO 120gb Seagate 7200.14 2tb Samsung dvd+-rw 
CoolingOSMonitorMonitor
Noctua NH-D14 Windows 7 ultimate x64 LG 24MP55 x2 LG 32LD450 
KeyboardPowerCaseMouse
Dell thing. Corsair TX650 Coolermaster cm690 Logitech G500 
Mouse PadAudioAudio
none Xonar DG and logitech X-540 Beyer DT770 PRO 
CPUMotherboardGraphicsRAM
AMD A6-4455m 2.1ghz Dual Covered in tea stains Radeon 7500G 6GB 
Hard DriveOptical DriveCoolingOS
SSD soon None Inadequate Win7 of course 
MonitorKeyboardCase
It's awful A bit meh, Bodged hinge repair (Nut and bolt through back ... 
CPUMotherboardGraphicsRAM
Celeron M 360 1.4ghz Packard bell easynote (lynx banias) Intel 855gm 768mb 
Hard DriveOptical DriveOSMonitor
50gb seagate Cd dvd combi XP sp3 15 
KeyboardPowerCaseMouse
one with buttons Brick It has one It has leds 
Mouse Pad
my lap or the chair 
  hide details  
Reply
post #9 of 38
Quote:
Originally Posted by alltoasters View Post
It is CMX4GX3M1A1333C9.

Corsair's site says it is 1.5v.
Ok good. If it were 1.65V, then I would have recommended a special voltage tweak.

Anyway, let's get started!

For now, let's prepare for increasing the multiplier with these settings:


Ai Tweaker
  • Ai Overclock Tuner: Manual
  • BLCK/PCIE Frequency: 100.0
  • Turbo Ratio: By All Cores
  • By All Cores: 33
  • Internal PLL Voltage: Disabled
  • Memory Frequency: DDR3-1333MHz
  • DRAM Timing Control: 9-9-9-24-2T
  • EPU Power Saving MODE: Disabled


Ai Tweaker\\ CPU Power Management >
  • CPU Ratio: Auto
  • Enhanced Intel SpeedStep Technology: Enabled
  • Turbo Mode: Enabled
  • Long Duration Power Limit: Auto
  • Long Duration Maintained: Auto
  • Short Duration Power Limit: Auto
  • Additional Turbo Voltage: Auto
  • Primary Plane Current Limit: Auto


Ai Tweaker (in the DIGI+ VRM section)
  • Load-Line Calibration: Ultra High
  • VRM Frequency: Manual
  • VRM Fixed Frequency Mode: 350
  • Phase Control: Extreme
  • Duty Control: Extreme
  • CPU Current Capability: 140% (it's supposed to be red)
  • CPU Voltage: Manual Mode (we will use Offset Mode when you install the Dark Knight)
  • CPU Manual Voltage: Auto (for now)
  • DRAM Voltage: 1.5000V
  • VCCSA Voltage: Auto
  • VCCIO Voltage: Auto
  • CPU PLL Voltage: Auto
  • PCH Voltage: Auto
  • CPU Spread Spectrum: Enabled


Advanced\\ CPU Configuration >
  • CPU Ratio: Auto
  • Intel Adaptive Thermal Monitor: Enabled
  • Active Processor Cores: All
  • Limit CPUID Maximum: Disabled
  • Execute Disable Bit: Enabled
  • Intel Virtualization Technology: Disabled
  • Enhanced Intel SpeedStep Technology: Enabled
  • Turbo Mode: Enabled
  • CPU C1E: Enabled
  • CPU C3 Report: Auto
  • CPU C6 Report: Auto


Once these settings are applied, then I think you can begin increasing the multiplier in increments of 1 until it's obvious that it's not stable.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #10 of 38
increase PWm frequency to 350khz as well like twocables said.
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
X99 Main Rig
(10 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5960X Extreme Edition @ 4.5GHz Always Changing VisonTek R9 290 G.Skill Ripjaws 4 16GB (4x4GB) DDR4 @ 3200MHz 
Hard DriveHard DriveHard DriveCooling
Samsung 128GB M.2 PCI-E 4x SSD Apotop 256GB SSD 1.82TB NAS Noctua NH-D15 with both fans 
OSPower
Win7 Pro Enermax 1000W 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Overclocking time