Overclock.net › Forums › Cooling › Water Cooling › Water Cooling build w/ 800D Case
New Posts  All Forums:Forum Nav:

Water Cooling build w/ 800D Case

post #1 of 14
Thread Starter 
2j2yvrm.jpg
okay i am planning on having

Dual Bay Reservoir (havent picked one out yet) > 240 Radiator > i7 2600k Cpu Cpu Block > 360 Radiator > 2x Radeon HD 6970 GPU Block >This Pump(355) or This Pump (655) > Dual Bay Reservoir

On the top of the case i will have this shroud with this grill on top. and for the bottom 240 radiator just so it doesn't get too bad with dust i would put this between the cut out bottom of the case and the radiator.

800D Case
Z68 Motherboard
Ripjaws X Series 8GB (2 x 4GB)
SeaSonic 750w Powersupply
2x F3 HD Raid 0
SSD Boot


Is 750w enough for this build?

Can anyone recommend some brand for 3 x 140mm and 8 x 120mm quite blue fans for a cheap price.
Also Tubing how much should i buy? what should i buy?
Also i need a cheap disk driver.. Hows my list look? should i add anything? change anything? please post your opinions.. (I'm shooting for a blue and black theme)
please post ur opinions and suggestions.. i will also prob add a quick release or something to clean out all the liquid down right before or after the 240 rad.

Edit: also how do i connect the tubing from one gpu to the next?
Edited by Mystxc - 8/4/11 at 6:37pm
In Progress
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600k GIGABYTE Z68 2x Radeon 6970 Ripjaws X 8GB (2 x 4GB) 
Hard DrivePowerCase
2x F3 1TB SeaSonic X750 750W Obsidian 800D 
  hide details  
Reply
In Progress
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600k GIGABYTE Z68 2x Radeon 6970 Ripjaws X 8GB (2 x 4GB) 
Hard DrivePowerCase
2x F3 1TB SeaSonic X750 750W Obsidian 800D 
  hide details  
Reply
post #2 of 14
loop order mate, D5s add heat so while you are design in it you would want a rad after pump if possible.

how i would do it in red

4PeCD.png

I therefore would go for the XSPC d5 bay res, Look at the tubing now. much neater smile.gif
Edited by andrewmchugh - 8/4/11 at 6:49pm
^3
(11 items)
 
   
CPUMotherboardGraphicsRAM
Intel Core i7 5930K  EVGA x99 Micro EVGA GTX 980 SC ACX 16GB Corsair DDR4 Vengeance LPX Black PC4-21300 
Hard DriveCoolingOSMonitor
500GB Samsung 840 EVO H105 Win 10 ASUS ROG PG279 
KeyboardPowerCase
Ducky Shine 1 MX-Red Corsair AX 860i  Fractal Design Node 804 Black 
CPUGraphicsRAMHard Drive
Core i7 @ 2.6  GT650 16GB of 1600 MHz DDR3L SDRAM 256GB SSD 
OSMonitorKeyboard
Mac OSX Lion Retina Display US layout 
  hide details  
Reply
^3
(11 items)
 
   
CPUMotherboardGraphicsRAM
Intel Core i7 5930K  EVGA x99 Micro EVGA GTX 980 SC ACX 16GB Corsair DDR4 Vengeance LPX Black PC4-21300 
Hard DriveCoolingOSMonitor
500GB Samsung 840 EVO H105 Win 10 ASUS ROG PG279 
KeyboardPowerCase
Ducky Shine 1 MX-Red Corsair AX 860i  Fractal Design Node 804 Black 
CPUGraphicsRAMHard Drive
Core i7 @ 2.6  GT650 16GB of 1600 MHz DDR3L SDRAM 256GB SSD 
OSMonitorKeyboard
Mac OSX Lion Retina Display US layout 
  hide details  
Reply
post #3 of 14
Thread Starter 
Quote:
Originally Posted by andrewmchugh;14467755 
loop order mate, D5s add heat so while you are design in it you would want a rad after pump if possible.

how i would do it in red

4PeCD.png

I therefore would go for the XSPC d5 bay res, Look at the tubing now. much neater smile.gif

so u would advise going with this http://www.frozencpu.com/products/11219/ex-res-232/XSPC_Dual_525_Bay_Reservoir_-_Laing_D5_MCP655_w_Blue_LED_Light_-_Clear_Silver_Black.html#blank and going with the loop on the right?
In Progress
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600k GIGABYTE Z68 2x Radeon 6970 Ripjaws X 8GB (2 x 4GB) 
Hard DrivePowerCase
2x F3 1TB SeaSonic X750 750W Obsidian 800D 
  hide details  
Reply
In Progress
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600k GIGABYTE Z68 2x Radeon 6970 Ripjaws X 8GB (2 x 4GB) 
Hard DrivePowerCase
2x F3 1TB SeaSonic X750 750W Obsidian 800D 
  hide details  
Reply
post #4 of 14
I would advise to use the 360 before the gpu's and the 240 before the CPU. Those gpus will put out 2 or 3x more heat than a 2600k at 4.5ghz under load
post #5 of 14
The way I had it the gpus are cooled by 360 and cpu by 240.

240 rad is first in loop.
Quote:
Originally Posted by Mystxc;14468013 
so u would advise going with this http://www.frozencpu.com/products/11219/ex-res-232/XSPC_Dual_525_Bay_Reservoir_-_Laing_D5_MCP655_w_Blue_LED_Light_-_Clear_Silver_Black.html#blank and going with the loop on the right?

YES
^3
(11 items)
 
   
CPUMotherboardGraphicsRAM
Intel Core i7 5930K  EVGA x99 Micro EVGA GTX 980 SC ACX 16GB Corsair DDR4 Vengeance LPX Black PC4-21300 
Hard DriveCoolingOSMonitor
500GB Samsung 840 EVO H105 Win 10 ASUS ROG PG279 
KeyboardPowerCase
Ducky Shine 1 MX-Red Corsair AX 860i  Fractal Design Node 804 Black 
CPUGraphicsRAMHard Drive
Core i7 @ 2.6  GT650 16GB of 1600 MHz DDR3L SDRAM 256GB SSD 
OSMonitorKeyboard
Mac OSX Lion Retina Display US layout 
  hide details  
Reply
^3
(11 items)
 
   
CPUMotherboardGraphicsRAM
Intel Core i7 5930K  EVGA x99 Micro EVGA GTX 980 SC ACX 16GB Corsair DDR4 Vengeance LPX Black PC4-21300 
Hard DriveCoolingOSMonitor
500GB Samsung 840 EVO H105 Win 10 ASUS ROG PG279 
KeyboardPowerCase
Ducky Shine 1 MX-Red Corsair AX 860i  Fractal Design Node 804 Black 
CPUGraphicsRAMHard Drive
Core i7 @ 2.6  GT650 16GB of 1600 MHz DDR3L SDRAM 256GB SSD 
OSMonitorKeyboard
Mac OSX Lion Retina Display US layout 
  hide details  
Reply
post #6 of 14
Thread Starter 
Quote:
Originally Posted by noak;14468053 
I would advise to use the 360 before the gpu's and the 240 before the CPU. Those gpus will put out 2 or 3x more heat than a 2600k at 4.5ghz under load
they are water goes through the 240 then the cpu then the 360 then the gpu
240 Radiator > i7 2600k Cpu Cpu Block > 360 Radiator > 2x Radeon HD 6970 GPU Block >
In Progress
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600k GIGABYTE Z68 2x Radeon 6970 Ripjaws X 8GB (2 x 4GB) 
Hard DrivePowerCase
2x F3 1TB SeaSonic X750 750W Obsidian 800D 
  hide details  
Reply
In Progress
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600k GIGABYTE Z68 2x Radeon 6970 Ripjaws X 8GB (2 x 4GB) 
Hard DrivePowerCase
2x F3 1TB SeaSonic X750 750W Obsidian 800D 
  hide details  
Reply
post #7 of 14
RES/pump > 240 > gpu > gpu > 360 > cpu > res/pump


Xfire 6970 with the d5 pump is a big load mate, I would up that.
Edited by andrewmchugh - 8/4/11 at 7:21pm
^3
(11 items)
 
   
CPUMotherboardGraphicsRAM
Intel Core i7 5930K  EVGA x99 Micro EVGA GTX 980 SC ACX 16GB Corsair DDR4 Vengeance LPX Black PC4-21300 
Hard DriveCoolingOSMonitor
500GB Samsung 840 EVO H105 Win 10 ASUS ROG PG279 
KeyboardPowerCase
Ducky Shine 1 MX-Red Corsair AX 860i  Fractal Design Node 804 Black 
CPUGraphicsRAMHard Drive
Core i7 @ 2.6  GT650 16GB of 1600 MHz DDR3L SDRAM 256GB SSD 
OSMonitorKeyboard
Mac OSX Lion Retina Display US layout 
  hide details  
Reply
^3
(11 items)
 
   
CPUMotherboardGraphicsRAM
Intel Core i7 5930K  EVGA x99 Micro EVGA GTX 980 SC ACX 16GB Corsair DDR4 Vengeance LPX Black PC4-21300 
Hard DriveCoolingOSMonitor
500GB Samsung 840 EVO H105 Win 10 ASUS ROG PG279 
KeyboardPowerCase
Ducky Shine 1 MX-Red Corsair AX 860i  Fractal Design Node 804 Black 
CPUGraphicsRAMHard Drive
Core i7 @ 2.6  GT650 16GB of 1600 MHz DDR3L SDRAM 256GB SSD 
OSMonitorKeyboard
Mac OSX Lion Retina Display US layout 
  hide details  
Reply
post #8 of 14
Thread Starter 
Quote:
Originally Posted by andrewmchugh;14468150 
RES/pump > 240 > gpu > gpu > 360 > cpu > res/pump


Xfire 6970 with the d5 pump is a big load mate, I would up that.

to what?
In Progress
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600k GIGABYTE Z68 2x Radeon 6970 Ripjaws X 8GB (2 x 4GB) 
Hard DrivePowerCase
2x F3 1TB SeaSonic X750 750W Obsidian 800D 
  hide details  
Reply
In Progress
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2600k GIGABYTE Z68 2x Radeon 6970 Ripjaws X 8GB (2 x 4GB) 
Hard DrivePowerCase
2x F3 1TB SeaSonic X750 750W Obsidian 800D 
  hide details  
Reply
post #9 of 14
never go pump to cpu, the radiator should always go after pump, for restriction reasons, and pump adds a fraction of the heat also so its better to go pump to rad
Sexy Red Got Wet
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 4.2GHZ evga FTW3 x58(nb/sb cooled by stacked 120mm rads) SLI Zotac gtx580 3gb (WC EK)  Corsair Dominator 6gb 1600mhz 
Hard DriveOSMonitorKeyboard
2x Raptor 150gb, 1 300gb raptor, 1 tb black caviar Win7 Ultimate (64bit) 3x Viewsonic x2268 3dVision Surround!! g-15 Logitech 
PowerCaseMouse
antec 1000w Quattro antec 1200(all fans are coolermaster r4) g-500 Logitech 
  hide details  
Reply
Sexy Red Got Wet
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 4.2GHZ evga FTW3 x58(nb/sb cooled by stacked 120mm rads) SLI Zotac gtx580 3gb (WC EK)  Corsair Dominator 6gb 1600mhz 
Hard DriveOSMonitorKeyboard
2x Raptor 150gb, 1 300gb raptor, 1 tb black caviar Win7 Ultimate (64bit) 3x Viewsonic x2268 3dVision Surround!! g-15 Logitech 
PowerCaseMouse
antec 1000w Quattro antec 1200(all fans are coolermaster r4) g-500 Logitech 
  hide details  
Reply
post #10 of 14
Okay check this out: Koolance RP452X2 for the 655 (or two) then up to the 360, down to the CPU, to the GPUs and then down to the 240 and back up to the RP452X2 Its my setup right now modified slightly. Its sweet! Also for the 6970's you could use EK serial blocks or something. You can add quick disconnects before and after the pump/res to help drain the loop. As for fittings its bitspower all the way smile.gif (you get what you pay for)
Edited by The Cheev - 8/4/11 at 8:45pm
Blue Baby
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 EVGA X58 SLI3 EVGA 580 GTX Corsair Dominator 12GB (2GBx6) 
Hard DriveOSMonitorPower
OCZ Vertex 2 100GB SSD Win 7 64bit Hannspree 23" Antec TruePower Quattro 850W 
Case
Corsair 800D 
  hide details  
Reply
Blue Baby
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 EVGA X58 SLI3 EVGA 580 GTX Corsair Dominator 12GB (2GBx6) 
Hard DriveOSMonitorPower
OCZ Vertex 2 100GB SSD Win 7 64bit Hannspree 23" Antec TruePower Quattro 850W 
Case
Corsair 800D 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Water Cooling build w/ 800D Case