Overclock.net › Forums › Intel › Intel CPUs › Suggestions Please
New Posts  All Forums:Forum Nav:

Suggestions Please

post #1 of 63
Thread Starter 
Well, I built my system earlier this year, and I am pretty happy about how it performs. But I have one of the best Motherboards and Chips out, but running at stock speeds. I have heard that overclocking the 2600k is simple, but I guess I am just a little worried because I have never done it before. This system cost me almost 2 grand to build and I dont want to ruin it. But I also want it to live up to everything it's capable of, and right now I know it isn't doing that.

I am running at the stock 3.4ghz for the CPU. I havent ran any tests on it or anything, because IDK much about overclocking.

How much more of a performance boost will I gain, going from 3.4 to say, 4.5? Also, I need some help on this voltage stuff. I am scared to death of it, because I dont want to fry my chip. I want the safest overclock I can get. I dont care about mind blowing speeds.
My Dream Machine
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600k 4.5 1.325v Asrock Z77 Pro 1155 EVGA GeForce GTX 670 4GB Corsair Vengeance 16GB (4 x 4GB) 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 256GB SSD Corsair Force Series 60GB SSD Western Digital 3TB 7200RPM Asus DVD-RW Drive 
CoolingOSMonitorPower
Corsair H80 Liquid Cooler Windows 7 Ultimate 64-bit 60 inch 1080p 120hrz 3DLED 1000W Coolermaster Silent Pro Gamer 
Case
White Corsairl 600T SE 
  hide details  
Reply
My Dream Machine
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600k 4.5 1.325v Asrock Z77 Pro 1155 EVGA GeForce GTX 670 4GB Corsair Vengeance 16GB (4 x 4GB) 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 256GB SSD Corsair Force Series 60GB SSD Western Digital 3TB 7200RPM Asus DVD-RW Drive 
CoolingOSMonitorPower
Corsair H80 Liquid Cooler Windows 7 Ultimate 64-bit 60 inch 1080p 120hrz 3DLED 1000W Coolermaster Silent Pro Gamer 
Case
White Corsairl 600T SE 
  hide details  
Reply
post #2 of 63
For that kind of overclock, you won't need to adjust that many settings. Every setting below in bold red was a "set it and forget it" setting for me. Of course, some of these will be obvious to you.


Ai Tweaker
  • Ai Overclock Tuner: Manual
  • BLCK/PCIE Frequency: 100.0
  • Turbo Ratio: By All Cores
  • By All Cores: 48
  • Internal PLL Voltage: Disabled
  • Memory Frequency: DDR3-1866MHz (except, use your memory speed if it's different)
  • DRAM Timing Control: 9-11-9-29-1T (use your timings if it's different)
  • EPU Power Saving MODE: Disabled


Ai Tweaker\\ CPU Power Management >
  • CPU Ratio: Auto
  • Enhanced Intel SpeedStep Technology: Enabled
  • Turbo Mode: Enabled
  • Long Duration Power Limit: Auto
  • Long Duration Maintained: Auto
  • Short Duration Power Limit: Auto
  • Additional Turbo Voltage: Auto
  • Primary Plane Current Limit: Auto


Ai Tweaker (in the DIGI+ VRM section)
  • Load-Line Calibration: Ultra High
  • VRM Frequency: Manual
  • VRM Fixed Frequency Mode: 350
  • Phase Control: Extreme
  • Duty Control: Extreme
  • CPU Current Capability: 140%
  • CPU Voltage: Offset Mode
  • Offset Mode Sign: +
  • CPU Offset Voltage: 0.040V
  • DRAM Voltage: 1.5000V (use your voltage if it's different. If it's 1.65V, then set your VCCIO Voltage to at least 1.15000V)
  • VCCSA Voltage: 0.92500V (you can use Auto)
  • VCCIO Voltage: 1.13125V (You can use Auto)
  • CPU PLL Voltage: Auto
  • PCH Voltage: Auto
  • CPU Spread Spectrum: Enabled


Advanced\\ CPU Configuration >
  • CPU Ratio: Auto
  • Intel Adaptive Thermal Monitor: Enabled
  • Active Processor Cores: All
  • Limit CPUID Maximum: Disabled
  • Execute Disable Bit: Enabled
  • Intel Virtualization Technology: Disabled
  • Enhanced Intel SpeedStep Technology: Enabled
  • Turbo Mode: Enabled
  • CPU C1E: Enabled
  • CPU C3 Report: Auto
  • CPU C6 Report: Auto


So yeah, I really only have 4 settings that I care about. Actually, I'm thinking about putting my VCCSA voltage back to Auto which would mean that I'd only have 3 settings to play with.

Overclocking: Simplified.



Edit: I could actually put my VCCIO Voltage on Auto if I weren't anal retentive. So that would mean that all I'd have to be concerned about is the core voltage and my multiplier.

Edited by TwoCables - 8/6/11 at 1:09pm
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #3 of 63
Thread Starter 
So I can change my settings to what you listed above, and I should be fine?
My Dream Machine
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600k 4.5 1.325v Asrock Z77 Pro 1155 EVGA GeForce GTX 670 4GB Corsair Vengeance 16GB (4 x 4GB) 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 256GB SSD Corsair Force Series 60GB SSD Western Digital 3TB 7200RPM Asus DVD-RW Drive 
CoolingOSMonitorPower
Corsair H80 Liquid Cooler Windows 7 Ultimate 64-bit 60 inch 1080p 120hrz 3DLED 1000W Coolermaster Silent Pro Gamer 
Case
White Corsairl 600T SE 
  hide details  
Reply
My Dream Machine
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600k 4.5 1.325v Asrock Z77 Pro 1155 EVGA GeForce GTX 670 4GB Corsair Vengeance 16GB (4 x 4GB) 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 256GB SSD Corsair Force Series 60GB SSD Western Digital 3TB 7200RPM Asus DVD-RW Drive 
CoolingOSMonitorPower
Corsair H80 Liquid Cooler Windows 7 Ultimate 64-bit 60 inch 1080p 120hrz 3DLED 1000W Coolermaster Silent Pro Gamer 
Case
White Corsairl 600T SE 
  hide details  
Reply
post #4 of 63
Quote:
Originally Posted by emailjustinbyrd View Post
So I can change my settings to what you listed above, and I should be fine?
No. They are just for your reference.
There is no two systems work the same even they have exactly the same components.
You always have to find out what the best setting for YOUR system.

In general, there is no such thing as "safe OC".
But good news is for the SB in particular, there is safer OC.
(The reason why intel put out unlocked K-series is that they know it OC and stays stable.)
4.5 is good and most of SB can get there w/o a problem.

If you haven't OC before, try manual voltage first.
So you'll know exactly what voltage you need to get to 4.5.
After knowing what you need, you can try off-set later.
Also i7 with HT needs a bit more vcore than i5 which doesn't have HT.

Try stating your vcore at 1.325v. Load Line Calibration at level2 (ultra high)
I believe you have 1600mhz ram.
You shouldn't OC ram to 1866 especially this is your first step of your OC.
Just manually put the stock voltage and timings of your RAM.
You want to make sure your CPU OC is stable before OC ram.
More ram you have, it gets harder to OC CPU higher.
Edited by Tunagoblin - 8/6/11 at 1:02pm
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
post #5 of 63
Quote:
Originally Posted by emailjustinbyrd View Post
So I can change my settings to what you listed above, and I should be fine?
All of the red ones. For a basic overclock with air cooling up to about 4.8GHz, pretty much everyone should be using those red settings.

However, there are exceptions: use your memory's speed, timings and voltage. Additionally, experiment with the CPU Offset Voltage. Start off with 0.005V and make increments of 0.005 one at a time. Really though, you should be able to just figure out what you will get by adding it to the VID that you see in Core Temp as long as you have LLC at Ultra High.

You can also leave VCCSA and VCCIO voltage on Auto. I'm just being a little bit anal with them (I'm wasting my own time lol But this is a fun toy and I don't want to put it down yet).

Seriously, achieving 4.8GHz was a walk in the park for me.



Edit: Tunagoblin, it's absolutely safe for him to use all of of those red settings with the obvious exceptions I noted a few lines above.

Speaking of HT: always disable HT when overclocking unless you absolutely, positively need to use HT.
Edited by TwoCables - 8/6/11 at 1:01pm
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #6 of 63
I would be a bit hesitant with doing that because every chip is different and needs different amount of voltage, you could also have a so called "multiplier hole" at that exact multiplier, and his settings will put you to 4.8 not 4.5 GHz

Just do some playing with the multiplier and be careful with the voltages and report back to us, we'll help you out.

Oh and TwoCables: why would he disable HT? He bought a 2600k instead of a 2500k and that would basically put his $ to waste, I'd say leave it on as he will probably do SOMETHING, while maybe not often, but something that uses more than 4 threads and I think it's only a couple degrees celsius difference with and without. (And probably some small voltage) But the point being he got the 2600k instead of the 2500k so might aswell leave it on.
Edited by Recluse - 8/6/11 at 1:07pm
First build
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 950 @ 4 GHz 1.22v ASUS Rampage III Extreme Gainward GTX 580 Corsair Dominator GT 2000 MHz CL8 6GB 
Hard DriveOptical DriveOSMonitor
Intel X25 40GB SSD + WD Caviar Black 1TB Normal DVD one! Windows 7 Ultimate (64 bit) Benq T2210HD 21,5" 
KeyboardPowerCaseMouse
Razer BlackWidow Ultimate ordered! Cooler Master Silent Pro 850W Corsair Obsidian 800d Razer Mamba 
Mouse Pad
Razer Destructor 
  hide details  
Reply
First build
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 950 @ 4 GHz 1.22v ASUS Rampage III Extreme Gainward GTX 580 Corsair Dominator GT 2000 MHz CL8 6GB 
Hard DriveOptical DriveOSMonitor
Intel X25 40GB SSD + WD Caviar Black 1TB Normal DVD one! Windows 7 Ultimate (64 bit) Benq T2210HD 21,5" 
KeyboardPowerCaseMouse
Razer BlackWidow Ultimate ordered! Cooler Master Silent Pro 850W Corsair Obsidian 800d Razer Mamba 
Mouse Pad
Razer Destructor 
  hide details  
Reply
post #7 of 63
Quote:
Originally Posted by Recluse View Post
I would be a bit hesitant with doing that because every chip is different and needs different amount of voltage, you could also have a so called "multiplier hole" at that exact multiplier, and his settings will put you to 4.8 not 4.5 GHz

Just do some playing with the multiplier and be careful with the voltages and report back to us, we'll help you out.
Like I said to him, he can use all of the settings in bold red, not the black ones. My multiplier there is black.

However, I did tell him that there are exceptions because my reason for putting all those settings in red was to show him which settings are Set It And Forget It type of settings for me (and which could be for him too). So he will use his memory speed, timings and voltage.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #8 of 63
Quote:
Originally Posted by TwoCables View Post
Edit: Tunagoblin, it's absolutely safe for him to use all of of those red settings with the obvious exceptions I noted a few lines above.

Speaking of HT: always disable HT when overclocking unless you absolutely, positively need to use HT.
Yes, I know it's safe but that isn't my point.
I just want him to find out what the best settings for his system.
That's what we are here for.
Or otherwise your red settings should be a sticky and everyone should copy that and be happy, right?
But don't get me wrong, there is nothing wrong with what you are doing.
You know what I mean...
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
i5 2500K GTX570HD
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.8GHz 1.384V AsRock P67 Extreme4 (B3) UEFI3.19 EVGA GTX 570HD SC 930/1950 G.Skill RipjawsX DDR3 PC12800 2x4GB@1866 9-10-9-28 
Hard DriveOptical DriveCoolingOS
Crucial M4 SSD 128GB, 1x 500GB WD, 2x1TB WD Samsung DL DVD Writer Noctua NH-D14 Windows 7 Ultimate 64Bit SP1 
MonitorKeyboardPowerCase
Asus VG248QE Steelseries 6GV2 Rosewill Capstone 650W Corsair 600T White 
MouseMouse Pad
Steelseries Sensei Steelseries Qck Mini 
  hide details  
Reply
post #9 of 63
There. I updated it.

Now I can say that he can use all of the settings in red while using his own settings for whatever it is in black. I can also say to make note of the exceptions I added.


Quote:
Originally Posted by Tunagoblin View Post
Yes, I know it's safe but that isn't my point.
I just want him to find out what the best settings for his system.
That's what we are here for.
Or otherwise your red settings should be a sticky and everyone should copy that and be happy, right?
But don't get me wrong, there is nothing wrong with what you are doing.
You know what I mean...
Look at each red setting. With the exception of the memory speed, timings and voltage, what settings do you think would end up being different for him if he wanted 4.8GHz? He can even use Auto for VCCSA and VCCIO.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #10 of 63
Thread Starter 
If I didn't live in such a Country, wooded area I would find someone here to help me. But sadly, I live in a small town in Louisiana. No one anywhere around here has a computer like this. Around here, a great computer is one you buy from wal-mart. LOL
My Dream Machine
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600k 4.5 1.325v Asrock Z77 Pro 1155 EVGA GeForce GTX 670 4GB Corsair Vengeance 16GB (4 x 4GB) 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 256GB SSD Corsair Force Series 60GB SSD Western Digital 3TB 7200RPM Asus DVD-RW Drive 
CoolingOSMonitorPower
Corsair H80 Liquid Cooler Windows 7 Ultimate 64-bit 60 inch 1080p 120hrz 3DLED 1000W Coolermaster Silent Pro Gamer 
Case
White Corsairl 600T SE 
  hide details  
Reply
My Dream Machine
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 2600k 4.5 1.325v Asrock Z77 Pro 1155 EVGA GeForce GTX 670 4GB Corsair Vengeance 16GB (4 x 4GB) 
Hard DriveHard DriveHard DriveOptical Drive
Crucial M4 256GB SSD Corsair Force Series 60GB SSD Western Digital 3TB 7200RPM Asus DVD-RW Drive 
CoolingOSMonitorPower
Corsair H80 Liquid Cooler Windows 7 Ultimate 64-bit 60 inch 1080p 120hrz 3DLED 1000W Coolermaster Silent Pro Gamer 
Case
White Corsairl 600T SE 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Suggestions Please