Overclock.net › Forums › Intel › Intel CPUs › Please help with overclocking my i7 950
New Posts  All Forums:Forum Nav:

Please help with overclocking my i7 950

post #1 of 13
Thread Starter 
So I have been trying to get to a stable oc on my core i7 950 and hit the 4ghz mark. I ran a lot of test using different settings and they all seemed to crash eventually leading me to these settings. I think it may be finally stable according to the OCCT test I ran with no errors (results below) hitting 4034mhz [CPU] / 1698mhz [RAM]. Here are my bios settings:


CPU VCore 1.3375
CPU VTT Voltage +75mV
CPU PLL VCore [Auto] 1.8v
IOH PLL VCore [Auto] 1.8v
QPI PLL VCore 1.35v
Dimm Voltage 1.6v
Dimm DQ Vref +0mV
IOH Vcore 1.2v
IOH/ICH I/O Volt [Auto] 1.5v
ICH Vore [Auto] 1.1v

CPU Clock Ratio 19x
CPU Host Freq 212

IntelSpeedstep / Turo Mode [Disabled]
CxE Function [Disabled]
HT Technology [Enabled]

Mem Freq 2:8/1067Mhz
tCL 9
tRCD 9
tRP 9
tRAS 24
tRFC 74
Command Rate 1t

My Temps Idle and Load:



Some additional info from E-Leet aka CPUID:






Please let me know if any voltages seem too high or low for the results I have produced as lower temps would make me happy.

I would also inform you that the computer and the room that all of the testing was done in got decently warm because of the pc being constantly on, running a LOT of different temps and tests.

I am still new to overclocking but have read a LOT which has aided me this far and I must say that if it was not for all of the people in the ocn community as well as the evga forums none of this would have been attainable.

Here are the screenshots of the results and temps from OCCT:



CPU RESULTS:






V Core Results:



Voltage Results:





Please if you have any additional recommendations on running programs or well...anything please let me know all feedback is appreciated. Thanks again!
Edited by zerobahamut - 8/6/11 at 10:18pm
 
HTPC
(10 items)
 
 
CPUMotherboardGraphicsRAM
i7 950 (OC'd to 4.02ghz) EVGA x58 Classified 3 (2x) EVGA GTX 670 4GB Superclocked in SLI Corsair Dominator GT 12GB DDR3 2000MHz 
Hard DriveOptical DriveOSMonitor
Crucial C300 256GB SSD / WD Caviar Black 1TB / ... Samsung Blu-Ray burner Windows 7 Ultimate 64 bit (3x) ASUS VG236HE w/ XFX Tri-Stand & amBX Lights 
KeyboardPowerCaseMouse
Logitech g510 Corsair AX 1200W Corsair Obsidian 800D Razer Deathadder 
Mouse PadAudioAudio
Razer Vespula Titanium HD  Bowers & Wilkins 686 (Pair) 
CPUMotherboardGraphicsRAM
AMD A6-3500 Llano 2.1GHz   ASRock A75M FM1 AMD A75 ASUS ENGT430 G.SKILL 4GB 240-Pin DDR3 SDRAM DDR3 160 
Hard DriveHard DriveOptical DriveOS
(4) HITACHI Deskstar 0S03230 3TB 5400 RPM   Crucial M4 64GB  SAMSUNG Black Blu-ray Combo SATA Model SH-B123L Microsoft Windows 7 Home Premium  
PowerCase
OCZ ModXStream Pro 600W  Moneual Black Aluminum MonCaso 320B  
  hide details  
Reply
 
HTPC
(10 items)
 
 
CPUMotherboardGraphicsRAM
i7 950 (OC'd to 4.02ghz) EVGA x58 Classified 3 (2x) EVGA GTX 670 4GB Superclocked in SLI Corsair Dominator GT 12GB DDR3 2000MHz 
Hard DriveOptical DriveOSMonitor
Crucial C300 256GB SSD / WD Caviar Black 1TB / ... Samsung Blu-Ray burner Windows 7 Ultimate 64 bit (3x) ASUS VG236HE w/ XFX Tri-Stand & amBX Lights 
KeyboardPowerCaseMouse
Logitech g510 Corsair AX 1200W Corsair Obsidian 800D Razer Deathadder 
Mouse PadAudioAudio
Razer Vespula Titanium HD  Bowers & Wilkins 686 (Pair) 
CPUMotherboardGraphicsRAM
AMD A6-3500 Llano 2.1GHz   ASRock A75M FM1 AMD A75 ASUS ENGT430 G.SKILL 4GB 240-Pin DDR3 SDRAM DDR3 160 
Hard DriveHard DriveOptical DriveOS
(4) HITACHI Deskstar 0S03230 3TB 5400 RPM   Crucial M4 64GB  SAMSUNG Black Blu-ray Combo SATA Model SH-B123L Microsoft Windows 7 Home Premium  
PowerCase
OCZ ModXStream Pro 600W  Moneual Black Aluminum MonCaso 320B  
  hide details  
Reply
post #2 of 13
That voltage seems a little too high there, especially for D0. I have C0 stepping and I don't need that much voltage
El Computron
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Asus P8Z77V-LK 980 ti SLI Gskill Ripjaws 16gb  
Hard DriveHard DriveOptical DriveCooling
1 TB (2X500 RAID 0) Seagate Barracuda OCZ Vector 150 120 gb 2 LG DVD drives XSPC rasa 240 
OSMonitorKeyboardPower
Windows 7 Ultimate 64 Asus VG278 144hz Razer BlackWidow Cooler Master Silent Pro M 1000w 
CaseMouseMouse PadAudio
HAF X Razer Gaming Mouse Raytheon Pad Asus Xonar DX 7.1 
  hide details  
Reply
El Computron
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Asus P8Z77V-LK 980 ti SLI Gskill Ripjaws 16gb  
Hard DriveHard DriveOptical DriveCooling
1 TB (2X500 RAID 0) Seagate Barracuda OCZ Vector 150 120 gb 2 LG DVD drives XSPC rasa 240 
OSMonitorKeyboardPower
Windows 7 Ultimate 64 Asus VG278 144hz Razer BlackWidow Cooler Master Silent Pro M 1000w 
CaseMouseMouse PadAudio
HAF X Razer Gaming Mouse Raytheon Pad Asus Xonar DX 7.1 
  hide details  
Reply
post #3 of 13
Thread Starter 
which voltages do you thing i could lower? when i was testing i got a variety of errors from
BSOD: 124, 101, 09, 50
OCCT Errors: error detected on core 0, error detected on core 1, error detected on core 3, error detected on core 5

that's what led me to these voltages, but i may have increased some too far please any suggestions are useful at this point
 
HTPC
(10 items)
 
 
CPUMotherboardGraphicsRAM
i7 950 (OC'd to 4.02ghz) EVGA x58 Classified 3 (2x) EVGA GTX 670 4GB Superclocked in SLI Corsair Dominator GT 12GB DDR3 2000MHz 
Hard DriveOptical DriveOSMonitor
Crucial C300 256GB SSD / WD Caviar Black 1TB / ... Samsung Blu-Ray burner Windows 7 Ultimate 64 bit (3x) ASUS VG236HE w/ XFX Tri-Stand & amBX Lights 
KeyboardPowerCaseMouse
Logitech g510 Corsair AX 1200W Corsair Obsidian 800D Razer Deathadder 
Mouse PadAudioAudio
Razer Vespula Titanium HD  Bowers & Wilkins 686 (Pair) 
CPUMotherboardGraphicsRAM
AMD A6-3500 Llano 2.1GHz   ASRock A75M FM1 AMD A75 ASUS ENGT430 G.SKILL 4GB 240-Pin DDR3 SDRAM DDR3 160 
Hard DriveHard DriveOptical DriveOS
(4) HITACHI Deskstar 0S03230 3TB 5400 RPM   Crucial M4 64GB  SAMSUNG Black Blu-ray Combo SATA Model SH-B123L Microsoft Windows 7 Home Premium  
PowerCase
OCZ ModXStream Pro 600W  Moneual Black Aluminum MonCaso 320B  
  hide details  
Reply
 
HTPC
(10 items)
 
 
CPUMotherboardGraphicsRAM
i7 950 (OC'd to 4.02ghz) EVGA x58 Classified 3 (2x) EVGA GTX 670 4GB Superclocked in SLI Corsair Dominator GT 12GB DDR3 2000MHz 
Hard DriveOptical DriveOSMonitor
Crucial C300 256GB SSD / WD Caviar Black 1TB / ... Samsung Blu-Ray burner Windows 7 Ultimate 64 bit (3x) ASUS VG236HE w/ XFX Tri-Stand & amBX Lights 
KeyboardPowerCaseMouse
Logitech g510 Corsair AX 1200W Corsair Obsidian 800D Razer Deathadder 
Mouse PadAudioAudio
Razer Vespula Titanium HD  Bowers & Wilkins 686 (Pair) 
CPUMotherboardGraphicsRAM
AMD A6-3500 Llano 2.1GHz   ASRock A75M FM1 AMD A75 ASUS ENGT430 G.SKILL 4GB 240-Pin DDR3 SDRAM DDR3 160 
Hard DriveHard DriveOptical DriveOS
(4) HITACHI Deskstar 0S03230 3TB 5400 RPM   Crucial M4 64GB  SAMSUNG Black Blu-ray Combo SATA Model SH-B123L Microsoft Windows 7 Home Premium  
PowerCase
OCZ ModXStream Pro 600W  Moneual Black Aluminum MonCaso 320B  
  hide details  
Reply
post #4 of 13
Quote:
Originally Posted by zerobahamut View Post
which voltages do you thing i could lower? when i was testing i got a variety of errors from
BSOD: 124, 101, 09, 50
OCCT Errors: error detected on core 0, error detected on core 1, error detected on core 3, error detected on core 5

that's what led me to these voltages, but i may have increased some too far please any suggestions are useful at this point
The Vcore seems way too high especially for D0. Lower it to 1.24 and see what happens. I got a stable 3.8 on C0 at 1.25v, which means your Vcore needs to go waaay down, maybe even 1.23, but I don't have D0 so I can't be 100% but definitely try 1.24v

Edit: I see, u got 12 gigs of ram, that's why. Ok lower it Vcore to 1.25 and set the dram voltage to 1.65. If that fails set the vcore to 1.26
Edited by Jov4nTh3Yu9o - 8/6/11 at 10:49pm
El Computron
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Asus P8Z77V-LK 980 ti SLI Gskill Ripjaws 16gb  
Hard DriveHard DriveOptical DriveCooling
1 TB (2X500 RAID 0) Seagate Barracuda OCZ Vector 150 120 gb 2 LG DVD drives XSPC rasa 240 
OSMonitorKeyboardPower
Windows 7 Ultimate 64 Asus VG278 144hz Razer BlackWidow Cooler Master Silent Pro M 1000w 
CaseMouseMouse PadAudio
HAF X Razer Gaming Mouse Raytheon Pad Asus Xonar DX 7.1 
  hide details  
Reply
El Computron
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Asus P8Z77V-LK 980 ti SLI Gskill Ripjaws 16gb  
Hard DriveHard DriveOptical DriveCooling
1 TB (2X500 RAID 0) Seagate Barracuda OCZ Vector 150 120 gb 2 LG DVD drives XSPC rasa 240 
OSMonitorKeyboardPower
Windows 7 Ultimate 64 Asus VG278 144hz Razer BlackWidow Cooler Master Silent Pro M 1000w 
CaseMouseMouse PadAudio
HAF X Razer Gaming Mouse Raytheon Pad Asus Xonar DX 7.1 
  hide details  
Reply
post #5 of 13
I have mine set to 1.265 vcore in bios which works out out to be a solid 1.24v in reality. I keep HT off for heat because it's been really hot here lately, I don't have AC, my cooler isn't the best, and I don't want my chip going above 70C.

Good luck. BTW I'm using the same BCLK and multiplier as you, and mine is a D0.
Deathprimus
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-950 4.0Ghz @1.24v ASUS Sabertooth X58 ASUS 69502GB unlocked Corsair XMS3 6GB 
Hard DriveOptical DriveOSMonitor
WD Caviar Black 500GB LG Super multi Blue Win7 64bit ASUS 23" VH236 
PowerCase
Corsair TX850 Cooler Master HAF 932 
  hide details  
Reply
Deathprimus
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-950 4.0Ghz @1.24v ASUS Sabertooth X58 ASUS 69502GB unlocked Corsair XMS3 6GB 
Hard DriveOptical DriveOSMonitor
WD Caviar Black 500GB LG Super multi Blue Win7 64bit ASUS 23" VH236 
PowerCase
Corsair TX850 Cooler Master HAF 932 
  hide details  
Reply
post #6 of 13
I dont know much with stable OC, but with OC to the max, i had to go x23 multiplier, have you tried a x23. The 21 and 25 i tried were no good for my i7 950

http://valid.canardpc.com/show_oc.php?id=1936134
Slug
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 Asus Rampage III Extreme GTX 460 2GB Golden Sample - SLI G.Skill 12GB DDR3-1600 
Hard DriveOptical DriveOSMonitor
5 x 1tb Samsung HD103SJ Cheap TrueDirect burner Windows 7 Ultimate x64 Aquos 32" Wide Screen TV 
KeyboardPowerCaseMouse
Logitech Corsair AX1200 Gold Thermaltake Armor+ VH6000BWS Razor Naga 
Mouse Pad
Peice of plastic 
  hide details  
Reply
Slug
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 Asus Rampage III Extreme GTX 460 2GB Golden Sample - SLI G.Skill 12GB DDR3-1600 
Hard DriveOptical DriveOSMonitor
5 x 1tb Samsung HD103SJ Cheap TrueDirect burner Windows 7 Ultimate x64 Aquos 32" Wide Screen TV 
KeyboardPowerCaseMouse
Logitech Corsair AX1200 Gold Thermaltake Armor+ VH6000BWS Razor Naga 
Mouse Pad
Peice of plastic 
  hide details  
Reply
post #7 of 13
Thread Starter 
I will definitely try the lower voltages today and run some tests when they are done Ill post the results. Also what is the advantage of having hyper threading on? What does it even exactly do that it makes the temps go so high?

On a side note do you think its possible to push this to 4.1 or 4.2ghz? Of course i want to be stable at 4 first, but if I can get it stable with the lower voltages maybe I could get it to be stable at a higher clock? I have been trying to keep the multiplier down and the host freq high as basically everything I have read said that you want the host freq as high as possible.

I used the 23x multiplier in my original overclock to get to 3.9ghz, but it seemed that if I tried to push it any further I would get a ton of bsods and at that time prime 95 errors

*also my memory is rated to run at 2000 I put 1700 in my profile because at the time thats what they were running at ill change that now
 
HTPC
(10 items)
 
 
CPUMotherboardGraphicsRAM
i7 950 (OC'd to 4.02ghz) EVGA x58 Classified 3 (2x) EVGA GTX 670 4GB Superclocked in SLI Corsair Dominator GT 12GB DDR3 2000MHz 
Hard DriveOptical DriveOSMonitor
Crucial C300 256GB SSD / WD Caviar Black 1TB / ... Samsung Blu-Ray burner Windows 7 Ultimate 64 bit (3x) ASUS VG236HE w/ XFX Tri-Stand & amBX Lights 
KeyboardPowerCaseMouse
Logitech g510 Corsair AX 1200W Corsair Obsidian 800D Razer Deathadder 
Mouse PadAudioAudio
Razer Vespula Titanium HD  Bowers & Wilkins 686 (Pair) 
CPUMotherboardGraphicsRAM
AMD A6-3500 Llano 2.1GHz   ASRock A75M FM1 AMD A75 ASUS ENGT430 G.SKILL 4GB 240-Pin DDR3 SDRAM DDR3 160 
Hard DriveHard DriveOptical DriveOS
(4) HITACHI Deskstar 0S03230 3TB 5400 RPM   Crucial M4 64GB  SAMSUNG Black Blu-ray Combo SATA Model SH-B123L Microsoft Windows 7 Home Premium  
PowerCase
OCZ ModXStream Pro 600W  Moneual Black Aluminum MonCaso 320B  
  hide details  
Reply
 
HTPC
(10 items)
 
 
CPUMotherboardGraphicsRAM
i7 950 (OC'd to 4.02ghz) EVGA x58 Classified 3 (2x) EVGA GTX 670 4GB Superclocked in SLI Corsair Dominator GT 12GB DDR3 2000MHz 
Hard DriveOptical DriveOSMonitor
Crucial C300 256GB SSD / WD Caviar Black 1TB / ... Samsung Blu-Ray burner Windows 7 Ultimate 64 bit (3x) ASUS VG236HE w/ XFX Tri-Stand & amBX Lights 
KeyboardPowerCaseMouse
Logitech g510 Corsair AX 1200W Corsair Obsidian 800D Razer Deathadder 
Mouse PadAudioAudio
Razer Vespula Titanium HD  Bowers & Wilkins 686 (Pair) 
CPUMotherboardGraphicsRAM
AMD A6-3500 Llano 2.1GHz   ASRock A75M FM1 AMD A75 ASUS ENGT430 G.SKILL 4GB 240-Pin DDR3 SDRAM DDR3 160 
Hard DriveHard DriveOptical DriveOS
(4) HITACHI Deskstar 0S03230 3TB 5400 RPM   Crucial M4 64GB  SAMSUNG Black Blu-ray Combo SATA Model SH-B123L Microsoft Windows 7 Home Premium  
PowerCase
OCZ ModXStream Pro 600W  Moneual Black Aluminum MonCaso 320B  
  hide details  
Reply
post #8 of 13
Slug
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 Asus Rampage III Extreme GTX 460 2GB Golden Sample - SLI G.Skill 12GB DDR3-1600 
Hard DriveOptical DriveOSMonitor
5 x 1tb Samsung HD103SJ Cheap TrueDirect burner Windows 7 Ultimate x64 Aquos 32" Wide Screen TV 
KeyboardPowerCaseMouse
Logitech Corsair AX1200 Gold Thermaltake Armor+ VH6000BWS Razor Naga 
Mouse Pad
Peice of plastic 
  hide details  
Reply
Slug
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 Asus Rampage III Extreme GTX 460 2GB Golden Sample - SLI G.Skill 12GB DDR3-1600 
Hard DriveOptical DriveOSMonitor
5 x 1tb Samsung HD103SJ Cheap TrueDirect burner Windows 7 Ultimate x64 Aquos 32" Wide Screen TV 
KeyboardPowerCaseMouse
Logitech Corsair AX1200 Gold Thermaltake Armor+ VH6000BWS Razor Naga 
Mouse Pad
Peice of plastic 
  hide details  
Reply
post #9 of 13
for 4.0 you should be using ratio = 21 vclk = 191 .. ratio 19 isn't going to get you anywhere.

voltage should be around 1.23. Make sure load line calibration is enabled, 800mhz cpu differential amplitude, and 300ps CPU & IOH delays. All other voltages should be auto, except dram which will probably work at 1.52-1.56. You probably want to re-enable speedstep and the other thing too. I wish there was a way to export all the bios settings...

anything above 4.0 is going to be tough on air. I could never get it stable.

Also there's a whole thread where a large group of much more knowledgeable people than me lurk http://www.overclock.net/intel-cpus/...club-read.html
Edited by lloyd mcclendon - 8/7/11 at 10:40am
stable again
(25 items)
 
  
CPUCPUMotherboardGraphics
E5-2687W E5-2687W ASUS Z9PED8-WS EVGA GTX 570 (Linux host) 
GraphicsRAMHard DriveHard Drive
EVGA GTX 970 FTW (win7 guest) 64GB G.SKILL 2133 2x Crucial M4 256GB raid1 4x 3TB raid 10 
CoolingCoolingCoolingCooling
2x Apogee HD  2x RX 480 2x MCP 655 RP-452x2 rev2 (new) 
CoolingCoolingOSOS
16x Cougar Turbine CFT12SB4 (new) EK FC 580 Gentoo (host) Gentoo (x23 guests) 
OSMonitorMonitorPower
windows 7 (guest w/ vfio-pci) Viewsonic 23" 1080P Viewsonic 19" Antec HCP Platinum 1000 (new) 
CaseOtherOther
Case Labs TH10 (still the best ever) 2x Lamptron FC-5 IOGEAR 2 way DVI KVM Switch 
  hide details  
Reply
stable again
(25 items)
 
  
CPUCPUMotherboardGraphics
E5-2687W E5-2687W ASUS Z9PED8-WS EVGA GTX 570 (Linux host) 
GraphicsRAMHard DriveHard Drive
EVGA GTX 970 FTW (win7 guest) 64GB G.SKILL 2133 2x Crucial M4 256GB raid1 4x 3TB raid 10 
CoolingCoolingCoolingCooling
2x Apogee HD  2x RX 480 2x MCP 655 RP-452x2 rev2 (new) 
CoolingCoolingOSOS
16x Cougar Turbine CFT12SB4 (new) EK FC 580 Gentoo (host) Gentoo (x23 guests) 
OSMonitorMonitorPower
windows 7 (guest w/ vfio-pci) Viewsonic 23" 1080P Viewsonic 19" Antec HCP Platinum 1000 (new) 
CaseOtherOther
Case Labs TH10 (still the best ever) 2x Lamptron FC-5 IOGEAR 2 way DVI KVM Switch 
  hide details  
Reply
post #10 of 13
Thread Starter 
so ive been trying to work with the voltages and for 4.0 i am having a lot of trouble with higher multipliers it seems i can get 23x with 170 bringing me to 3.9ghz stable, lowering my voltages a bit, but the 1.23v range just almost instantly fails in occt testing thats their standard and or their linpack test. If one fails I try the other... Please any suggestions. I feel stuck here. Do i just have a power hungry chip?

Also as far as cooling I am using a corsair h70 with push pull ( scythe ap-15s), I have another 3 ap-15's pulling hot air out of the case as well while they are controlled on a lamptron fc5v2 fan controller. all other fans are the standard ones in the corsair 800d case
Edited by zerobahamut - 8/7/11 at 9:54pm
 
HTPC
(10 items)
 
 
CPUMotherboardGraphicsRAM
i7 950 (OC'd to 4.02ghz) EVGA x58 Classified 3 (2x) EVGA GTX 670 4GB Superclocked in SLI Corsair Dominator GT 12GB DDR3 2000MHz 
Hard DriveOptical DriveOSMonitor
Crucial C300 256GB SSD / WD Caviar Black 1TB / ... Samsung Blu-Ray burner Windows 7 Ultimate 64 bit (3x) ASUS VG236HE w/ XFX Tri-Stand & amBX Lights 
KeyboardPowerCaseMouse
Logitech g510 Corsair AX 1200W Corsair Obsidian 800D Razer Deathadder 
Mouse PadAudioAudio
Razer Vespula Titanium HD  Bowers & Wilkins 686 (Pair) 
CPUMotherboardGraphicsRAM
AMD A6-3500 Llano 2.1GHz   ASRock A75M FM1 AMD A75 ASUS ENGT430 G.SKILL 4GB 240-Pin DDR3 SDRAM DDR3 160 
Hard DriveHard DriveOptical DriveOS
(4) HITACHI Deskstar 0S03230 3TB 5400 RPM   Crucial M4 64GB  SAMSUNG Black Blu-ray Combo SATA Model SH-B123L Microsoft Windows 7 Home Premium  
PowerCase
OCZ ModXStream Pro 600W  Moneual Black Aluminum MonCaso 320B  
  hide details  
Reply
 
HTPC
(10 items)
 
 
CPUMotherboardGraphicsRAM
i7 950 (OC'd to 4.02ghz) EVGA x58 Classified 3 (2x) EVGA GTX 670 4GB Superclocked in SLI Corsair Dominator GT 12GB DDR3 2000MHz 
Hard DriveOptical DriveOSMonitor
Crucial C300 256GB SSD / WD Caviar Black 1TB / ... Samsung Blu-Ray burner Windows 7 Ultimate 64 bit (3x) ASUS VG236HE w/ XFX Tri-Stand & amBX Lights 
KeyboardPowerCaseMouse
Logitech g510 Corsair AX 1200W Corsair Obsidian 800D Razer Deathadder 
Mouse PadAudioAudio
Razer Vespula Titanium HD  Bowers & Wilkins 686 (Pair) 
CPUMotherboardGraphicsRAM
AMD A6-3500 Llano 2.1GHz   ASRock A75M FM1 AMD A75 ASUS ENGT430 G.SKILL 4GB 240-Pin DDR3 SDRAM DDR3 160 
Hard DriveHard DriveOptical DriveOS
(4) HITACHI Deskstar 0S03230 3TB 5400 RPM   Crucial M4 64GB  SAMSUNG Black Blu-ray Combo SATA Model SH-B123L Microsoft Windows 7 Home Premium  
PowerCase
OCZ ModXStream Pro 600W  Moneual Black Aluminum MonCaso 320B  
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Please help with overclocking my i7 950