Overclock.net › Forums › AMD › AMD CPUs › Phenom II 965 OC Help (Again)
New Posts  All Forums:Forum Nav:

Phenom II 965 OC Help (Again)

post #1 of 18
Thread Starter 
Alright this sounds stupid but i'll put it up,

Why the CRAP am I having to use more voltage (1.5326v) 64bit OS then saya bout 4months ago when i was running 32bit os and I only had to use around 1.46 or 1.49.
CPU Multi @ 20
FSB @ 20
PCI @ 101
CPU Voltage = 1.5326
CPU/NB Voltage = 1.35000
NB @ 2800
HT @ 2000
NB Voltage = 1.35000
HT Voltage = 1.32000
Dram @ 1333 (I have 1600Mhz Ram) @ 1.8v
CPU-Load Line Enabled
CPU/NB Load Line Enabled

61c max temp underload.

Explain how I can keep this stable, with a lower voltage. as it seems it may pass 40 Intel Burn Tests right now and this is the first time it's passed all day. I just increased the voltage about 30mins ago.

Regards,

**EDIT**
I would just like to add it did complete 40/40 tests on Intel Burn Test.
Also my "stats" down below are wrong, no way was I using 1.57v. I believe CPUz shows 1.52v when VDroop enables else it sits around 1.51
Edited by trenth - 8/7/11 at 6:27pm
Stupid Computer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 965 4.0GHz/1.57v M4A89GTD-Pro 5850 Toxic 4GB OCZ Reaper HPC 
Hard DriveOSMonitorKeyboard
320Gb Windows 7 32bit 22" Samsung 2232BW Microsoft Erganomics 4000 
PowerCaseMouseMouse Pad
800w Rosewill CM-690 II Advanced MX-518 X-Trac Ripper XL 
  hide details  
Reply
Stupid Computer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 965 4.0GHz/1.57v M4A89GTD-Pro 5850 Toxic 4GB OCZ Reaper HPC 
Hard DriveOSMonitorKeyboard
320Gb Windows 7 32bit 22" Samsung 2232BW Microsoft Erganomics 4000 
PowerCaseMouseMouse Pad
800w Rosewill CM-690 II Advanced MX-518 X-Trac Ripper XL 
  hide details  
Reply
post #2 of 18
250x16 = 4.0
It wont use as much voltage.

Youll have to set the ram at 1333 to start and make sure you up the NB volts when it gets to 2600ish.

Do you have a C2 or C3?
New
(11 items)
 
  
CPUMotherboardGraphicsRAM
2500k @5ghz Asus P8P67 Evo 6970 @ 1000/1450 8GB Ripjaws DDR31600 Cas8 
Hard DriveCoolingOSMonitor
Samsung 850 Pro 128GB + WD 1TB XSPC Rasa,RX360,D5 w/EK top,Ek150 res,AP-15's 7 Pro Asus VW266H 
KeyboardPowerCase
G11 AX850 Corsair 800D 
  hide details  
Reply
New
(11 items)
 
  
CPUMotherboardGraphicsRAM
2500k @5ghz Asus P8P67 Evo 6970 @ 1000/1450 8GB Ripjaws DDR31600 Cas8 
Hard DriveCoolingOSMonitor
Samsung 850 Pro 128GB + WD 1TB XSPC Rasa,RX360,D5 w/EK top,Ek150 res,AP-15's 7 Pro Asus VW266H 
KeyboardPowerCase
G11 AX850 Corsair 800D 
  hide details  
Reply
post #3 of 18
Thread Starter 
C3, Ram is at 1333 7-7-7-24 1.8V NB is at 1.35V

Do I change the CPU/NB Voltage or just the NB voltage?

Regards,
Stupid Computer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 965 4.0GHz/1.57v M4A89GTD-Pro 5850 Toxic 4GB OCZ Reaper HPC 
Hard DriveOSMonitorKeyboard
320Gb Windows 7 32bit 22" Samsung 2232BW Microsoft Erganomics 4000 
PowerCaseMouseMouse Pad
800w Rosewill CM-690 II Advanced MX-518 X-Trac Ripper XL 
  hide details  
Reply
Stupid Computer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 965 4.0GHz/1.57v M4A89GTD-Pro 5850 Toxic 4GB OCZ Reaper HPC 
Hard DriveOSMonitorKeyboard
320Gb Windows 7 32bit 22" Samsung 2232BW Microsoft Erganomics 4000 
PowerCaseMouseMouse Pad
800w Rosewill CM-690 II Advanced MX-518 X-Trac Ripper XL 
  hide details  
Reply
post #4 of 18
cpu/nb volts

Try 240 x 16 first to see how it works.
New
(11 items)
 
  
CPUMotherboardGraphicsRAM
2500k @5ghz Asus P8P67 Evo 6970 @ 1000/1450 8GB Ripjaws DDR31600 Cas8 
Hard DriveCoolingOSMonitor
Samsung 850 Pro 128GB + WD 1TB XSPC Rasa,RX360,D5 w/EK top,Ek150 res,AP-15's 7 Pro Asus VW266H 
KeyboardPowerCase
G11 AX850 Corsair 800D 
  hide details  
Reply
New
(11 items)
 
  
CPUMotherboardGraphicsRAM
2500k @5ghz Asus P8P67 Evo 6970 @ 1000/1450 8GB Ripjaws DDR31600 Cas8 
Hard DriveCoolingOSMonitor
Samsung 850 Pro 128GB + WD 1TB XSPC Rasa,RX360,D5 w/EK top,Ek150 res,AP-15's 7 Pro Asus VW266H 
KeyboardPowerCase
G11 AX850 Corsair 800D 
  hide details  
Reply
post #5 of 18
Thread Starter 
So I have to do this?
CPU Voltage = 1.48v
CPU/NB Voltage = 1.3V
NB Voltage = 1.35V
Stupid Computer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 965 4.0GHz/1.57v M4A89GTD-Pro 5850 Toxic 4GB OCZ Reaper HPC 
Hard DriveOSMonitorKeyboard
320Gb Windows 7 32bit 22" Samsung 2232BW Microsoft Erganomics 4000 
PowerCaseMouseMouse Pad
800w Rosewill CM-690 II Advanced MX-518 X-Trac Ripper XL 
  hide details  
Reply
Stupid Computer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 965 4.0GHz/1.57v M4A89GTD-Pro 5850 Toxic 4GB OCZ Reaper HPC 
Hard DriveOSMonitorKeyboard
320Gb Windows 7 32bit 22" Samsung 2232BW Microsoft Erganomics 4000 
PowerCaseMouseMouse Pad
800w Rosewill CM-690 II Advanced MX-518 X-Trac Ripper XL 
  hide details  
Reply
post #6 of 18
cpu/nb 1.35
nb 1.3
New
(11 items)
 
  
CPUMotherboardGraphicsRAM
2500k @5ghz Asus P8P67 Evo 6970 @ 1000/1450 8GB Ripjaws DDR31600 Cas8 
Hard DriveCoolingOSMonitor
Samsung 850 Pro 128GB + WD 1TB XSPC Rasa,RX360,D5 w/EK top,Ek150 res,AP-15's 7 Pro Asus VW266H 
KeyboardPowerCase
G11 AX850 Corsair 800D 
  hide details  
Reply
New
(11 items)
 
  
CPUMotherboardGraphicsRAM
2500k @5ghz Asus P8P67 Evo 6970 @ 1000/1450 8GB Ripjaws DDR31600 Cas8 
Hard DriveCoolingOSMonitor
Samsung 850 Pro 128GB + WD 1TB XSPC Rasa,RX360,D5 w/EK top,Ek150 res,AP-15's 7 Pro Asus VW266H 
KeyboardPowerCase
G11 AX850 Corsair 800D 
  hide details  
Reply
post #7 of 18
Thread Starter 


Current settings (I'm on 1.49v though, right now)
8-8-8-24 @ 1.8V 1333MHz
Stupid Computer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 965 4.0GHz/1.57v M4A89GTD-Pro 5850 Toxic 4GB OCZ Reaper HPC 
Hard DriveOSMonitorKeyboard
320Gb Windows 7 32bit 22" Samsung 2232BW Microsoft Erganomics 4000 
PowerCaseMouseMouse Pad
800w Rosewill CM-690 II Advanced MX-518 X-Trac Ripper XL 
  hide details  
Reply
Stupid Computer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 965 4.0GHz/1.57v M4A89GTD-Pro 5850 Toxic 4GB OCZ Reaper HPC 
Hard DriveOSMonitorKeyboard
320Gb Windows 7 32bit 22" Samsung 2232BW Microsoft Erganomics 4000 
PowerCaseMouseMouse Pad
800w Rosewill CM-690 II Advanced MX-518 X-Trac Ripper XL 
  hide details  
Reply
post #8 of 18
Stable at all?
New
(11 items)
 
  
CPUMotherboardGraphicsRAM
2500k @5ghz Asus P8P67 Evo 6970 @ 1000/1450 8GB Ripjaws DDR31600 Cas8 
Hard DriveCoolingOSMonitor
Samsung 850 Pro 128GB + WD 1TB XSPC Rasa,RX360,D5 w/EK top,Ek150 res,AP-15's 7 Pro Asus VW266H 
KeyboardPowerCase
G11 AX850 Corsair 800D 
  hide details  
Reply
New
(11 items)
 
  
CPUMotherboardGraphicsRAM
2500k @5ghz Asus P8P67 Evo 6970 @ 1000/1450 8GB Ripjaws DDR31600 Cas8 
Hard DriveCoolingOSMonitor
Samsung 850 Pro 128GB + WD 1TB XSPC Rasa,RX360,D5 w/EK top,Ek150 res,AP-15's 7 Pro Asus VW266H 
KeyboardPowerCase
G11 AX850 Corsair 800D 
  hide details  
Reply
post #9 of 18
Thread Starter 
Nope just crashed on me and I had to add more voltage....

Doesn't matter temps sit around the same, 56-61C...stupid vdroop.
Stupid Computer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 965 4.0GHz/1.57v M4A89GTD-Pro 5850 Toxic 4GB OCZ Reaper HPC 
Hard DriveOSMonitorKeyboard
320Gb Windows 7 32bit 22" Samsung 2232BW Microsoft Erganomics 4000 
PowerCaseMouseMouse Pad
800w Rosewill CM-690 II Advanced MX-518 X-Trac Ripper XL 
  hide details  
Reply
Stupid Computer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 965 4.0GHz/1.57v M4A89GTD-Pro 5850 Toxic 4GB OCZ Reaper HPC 
Hard DriveOSMonitorKeyboard
320Gb Windows 7 32bit 22" Samsung 2232BW Microsoft Erganomics 4000 
PowerCaseMouseMouse Pad
800w Rosewill CM-690 II Advanced MX-518 X-Trac Ripper XL 
  hide details  
Reply
post #10 of 18
Thread Starter 
Is it true that overclocking isn't as stable on 64bit as it is on 32?
Or that maybe my CPU is crapping out on me?
Stupid Computer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 965 4.0GHz/1.57v M4A89GTD-Pro 5850 Toxic 4GB OCZ Reaper HPC 
Hard DriveOSMonitorKeyboard
320Gb Windows 7 32bit 22" Samsung 2232BW Microsoft Erganomics 4000 
PowerCaseMouseMouse Pad
800w Rosewill CM-690 II Advanced MX-518 X-Trac Ripper XL 
  hide details  
Reply
Stupid Computer
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 965 4.0GHz/1.57v M4A89GTD-Pro 5850 Toxic 4GB OCZ Reaper HPC 
Hard DriveOSMonitorKeyboard
320Gb Windows 7 32bit 22" Samsung 2232BW Microsoft Erganomics 4000 
PowerCaseMouseMouse Pad
800w Rosewill CM-690 II Advanced MX-518 X-Trac Ripper XL 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › Phenom II 965 OC Help (Again)