Originally Posted by Nebster;14506769
I don't want to cut out anything. I think I saw a picture of someone having the h100 in his case(vulcan), without the handle. Is it because you can't have them at the same time?
If push/pull with 4 fans is possible, I'm going to have to instal 2 fans outside of the case?
How does the h80(2 fans) compare to the h100(2 fans, since it can't fit 4)?
honestly ive always hated prebuilt water systems. since you aren't the one that built it, then if something goes wrong, you don't know how to fix it.
anyways, back to the point, the h100 is much much better and the h80 most likely wont fit in your case (the fans and rad sit on the CPU....its HUGE).
like i said in an earlier post, using a pull method with just two fans isn't that bad. so if i were you, i would just get the H100, set it so the fans are pulling from the inside of the case (unless you don't mind the heat hitting your other components, in which case you can get better CPU temps by drawing from outside the case) and eventually you can get two more fans. Who knows, the additional fans may fit as-is but you won't find out until you get them or if someone on here has tried something similar.