Originally Posted by Supacasey
For the record, it appears to need 1.6v, not 1.65v. Though I understand that's still quite high.
Think it'll last 'till IB or SB-E at those volts?
Only a suggestion, I would only run it with Memory Multiplier 8 x BCLK 200, 1,600 MHz, 7-7-7-20 (maybe try tighten timings after this) and see if you can lower QPI/Vtt to 1.3v 1.4v.
For 24/7 that should be plenty. For benching the kits are not suitable as I got the same kit too.
Edit: Check the performance using Everest, Tool, Memory Benchmark with 2,000 MHz then check again with 1,600 MHz.
Try IOH Core 1.12v and step up one notch at a time to maintain stability and stop at 1.15v. Yes this voltage is related. All voltages are all related in OC.
I see your IOH core 1.35v. Is it what it takes to maintain stability + 580 SLI?Edited by Ken1649 - 8/12/11 at 9:12pm