Overclock.net › Forums › Components › Hard Drives & Storage › SSD › i need a recommend to get a ssd.
New Posts  All Forums:Forum Nav:

i need a recommend to get a ssd. - Page 8

post #71 of 97
Thread Starter 
Quote:
Originally Posted by rdr09 View Post
based on your motherboard i recommend a sataIII, MLC ssd with at least 120 gb capacity. if you can find one with the adapter (2.5/3.5), and an acronis or equivalent software to make the transition smoother.

and read this . .

http://www.overclock.net/ssd/664738-...secondary.html

my hdd is a mirror of my ssd. if the ssd fails i just have to change my bios setting and boot from my hdd.
my brain almost expoding from reading this lol hmm i will read it often until i understand. (noob with how to set up hdd as a storage,etc)
blueduster 922
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 955BE 3.2 (4.0 oced) ghz Gigabyte GA-890GPA-UD3H revision 2.0 Sapphire HD6870 1gb 988/1250 G.SKILL 8GB (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 
Hard DriveOptical DriveOSMonitor
Samsung F3 1tb lite on dvd burner Window 7 home premium 64bit Viewsonic 22inch LED 1080p full HD 
PowerCaseMouseMouse Pad
corsair 750tx coolermaster HAF 922 GM-m6880 gigabyte ghost gaming series 
  hide details  
Reply
blueduster 922
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 955BE 3.2 (4.0 oced) ghz Gigabyte GA-890GPA-UD3H revision 2.0 Sapphire HD6870 1gb 988/1250 G.SKILL 8GB (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 
Hard DriveOptical DriveOSMonitor
Samsung F3 1tb lite on dvd burner Window 7 home premium 64bit Viewsonic 22inch LED 1080p full HD 
PowerCaseMouseMouse Pad
corsair 750tx coolermaster HAF 922 GM-m6880 gigabyte ghost gaming series 
  hide details  
Reply
post #72 of 97
Quote:
Originally Posted by Zerogamer22 View Post
how do i find out which is better?
By asking OCN.


Quote:
Originally Posted by Zerogamer22 View Post
my brain almost expoding from reading this lol hmm i will read it often until i understand. (noob with how to set up hdd as a storage,etc)
I don't understand why that guide exists because I don't think any of that stuff is necessary. Let's pretend that my G.SKILL Falcon is a 64GB hard drive and not a solid state drive. Ok, so while we're pretending that, let's see how I set it up as a storage drive:
  1. Before ordering my Mushkin Callisto Deluxe, my Falcon was my primary drive (C: drive), and I had a 150GB VelociRaptor as my storage drive.
  2. When UPS delivered my Callisto Deluxe, I disconnected my Falcon and VelociRaptor so that I could install Windows 7 onto the Callisto Deluxe without worrying about the boot sector being placed on either the Falcon or the VelociRaptor
  3. So, I installed Windows 7 onto the Callisto Deluxe
  4. The installation took about 5 minutes (maybe it was 7). When it finished, I shut my system down
  5. I connected to the Falcon in the 2nd port, and my VelociRaptor in the third port while the Callisto Deluxe was in the first port
  6. I booted back into the fresh installation of Win7 on the Callisto Deluxe
  7. I wanted to completely clean my Falcon and restore it back to its factory condition, so I reflashed its firmware using the same version. For the Falcon, this is the best way to do it.
  8. After that, I moved everything from the VelociRaptor to my Falcon (it was only 45GB of data).
  9. Then I shut down and took the VelociRaptor out of my system
  10. I booted back into the fresh installation of Win7 on my Callisto Deluxe

That's how I did it.

Notice how when I reached step #5, my Falcon and VelociRaptor were already my storage drives. So I don't see any need for doing anything else. I have absolutely zero problems with the way I have it set up. Simplicity FTW, I say!

The only thing I really do beyond this when I format and start over like that is I always change the default locations of these folders: Desktop, My Documents, My Pictures, My Music, My Pictures, My Videos, and Saved Games. I change them over to whatever storage drive I am using. So when I had the VelociRaptor, it was the VelociRaptor. Today, it's the Falcon. To do that, I just go into C:\\Users\\Me and right-click each folder I want to change and I choose Properties, I switch to the Location tab, and make the change.

I don't do anything else, and I see no reason to. I mean really: why make it any more complex than this?
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #73 of 97
Quote:
Originally Posted by TwoCables View Post
[*]I wanted to completely clean my Falcon and restore it back to its factory condition, so I reflashed its firmware using the same version. For the Falcon, this is the best way to do it.
Same version of the firmware?
First Build
(21 items)
 
  
CPUMotherboardGraphicsGraphics
4770k GIGABYTE GA-Z87X-UD3H 7950 Windforce 7950 Windforce 
RAMHard DriveHard DriveHard Drive
Kingston HyperX 1600 16gb ddr3 M500 256GB SSD Sandisk 250 GB SSD 1TB Samsung HDD 
Optical DriveCoolingOSMonitor
Asus BluRay player H100i Win 7 Asus PB278Q 
MonitorMonitorMonitorKeyboard
Asus PB278Q Dell U3415W 27" Cintiq Corsair K70 RGB 
PowerCaseMouseAudio
Supernova 850 G2 Corsair 650D Corsair Sabre Audiengine A4's/Jamo Sub/Denon D2000 Cans 
  hide details  
Reply
First Build
(21 items)
 
  
CPUMotherboardGraphicsGraphics
4770k GIGABYTE GA-Z87X-UD3H 7950 Windforce 7950 Windforce 
RAMHard DriveHard DriveHard Drive
Kingston HyperX 1600 16gb ddr3 M500 256GB SSD Sandisk 250 GB SSD 1TB Samsung HDD 
Optical DriveCoolingOSMonitor
Asus BluRay player H100i Win 7 Asus PB278Q 
MonitorMonitorMonitorKeyboard
Asus PB278Q Dell U3415W 27" Cintiq Corsair K70 RGB 
PowerCaseMouseAudio
Supernova 850 G2 Corsair 650D Corsair Sabre Audiengine A4's/Jamo Sub/Denon D2000 Cans 
  hide details  
Reply
post #74 of 97
Quote:
Originally Posted by BillOhio View Post
Same version of the firmware?
Yep!
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #75 of 97
Thread Starter 
thats easier to understand..

so when my crucial m4 arrive

1. i just have to disconnect my spinpoint f3

2. install the ssd into my case

3.install the win 7 into ssd

4. when its done and shut down, connecting my spinpoint f3, formatting my hdd

thats about all..right? was planning for f3 as a storage for my games.
blueduster 922
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 955BE 3.2 (4.0 oced) ghz Gigabyte GA-890GPA-UD3H revision 2.0 Sapphire HD6870 1gb 988/1250 G.SKILL 8GB (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 
Hard DriveOptical DriveOSMonitor
Samsung F3 1tb lite on dvd burner Window 7 home premium 64bit Viewsonic 22inch LED 1080p full HD 
PowerCaseMouseMouse Pad
corsair 750tx coolermaster HAF 922 GM-m6880 gigabyte ghost gaming series 
  hide details  
Reply
blueduster 922
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 955BE 3.2 (4.0 oced) ghz Gigabyte GA-890GPA-UD3H revision 2.0 Sapphire HD6870 1gb 988/1250 G.SKILL 8GB (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 
Hard DriveOptical DriveOSMonitor
Samsung F3 1tb lite on dvd burner Window 7 home premium 64bit Viewsonic 22inch LED 1080p full HD 
PowerCaseMouseMouse Pad
corsair 750tx coolermaster HAF 922 GM-m6880 gigabyte ghost gaming series 
  hide details  
Reply
post #76 of 97
Thread Starter 
and forgot final step. then just boot into on my future ssd right?

and one thing is thats new to me is theres a firmware for ssd. hmm i better reseach
blueduster 922
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 955BE 3.2 (4.0 oced) ghz Gigabyte GA-890GPA-UD3H revision 2.0 Sapphire HD6870 1gb 988/1250 G.SKILL 8GB (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 
Hard DriveOptical DriveOSMonitor
Samsung F3 1tb lite on dvd burner Window 7 home premium 64bit Viewsonic 22inch LED 1080p full HD 
PowerCaseMouseMouse Pad
corsair 750tx coolermaster HAF 922 GM-m6880 gigabyte ghost gaming series 
  hide details  
Reply
blueduster 922
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 955BE 3.2 (4.0 oced) ghz Gigabyte GA-890GPA-UD3H revision 2.0 Sapphire HD6870 1gb 988/1250 G.SKILL 8GB (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 
Hard DriveOptical DriveOSMonitor
Samsung F3 1tb lite on dvd burner Window 7 home premium 64bit Viewsonic 22inch LED 1080p full HD 
PowerCaseMouseMouse Pad
corsair 750tx coolermaster HAF 922 GM-m6880 gigabyte ghost gaming series 
  hide details  
Reply
post #77 of 97
Quote:
Originally Posted by Zerogamer22 View Post
thats easier to understand..

so when my crucial m4 arrive

1. i just have to disconnect my spinpoint f3

2. install the ssd into my case

3.install the win 7 into ssd

4. when its done and shut down, connecting my spinpoint f3, formatting my hdd

thats about all..right? was planning for f3 as a storage for my games.
That's exactly it!

If you are comfortable with formatting your Spinpoint F3, then yes. However, if you don't want to lose what is on there right now, then don't format it.


Quote:
Originally Posted by Zerogamer22 View Post
and forgot final step. then just boot into on my future ssd right?
When you get the SSD, the very first thing you need to do is make absolutely certain that the BIOS is configured to boot from the SSD first instead of the hard drive. So that's one good reason for connecting the SSD to the first SATA port.


Quote:
Originally Posted by Zerogamer22 View Post
and one thing is thats new to me is theres a firmware for ssd. hmm i better reseach
Hard drives have firmware too (so do optical drives).

To be honest, I don't really think it's necessary to update to the latest firmware unless you are having problems that are claimed to be fixed by the new firmware.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #78 of 97
Thread Starter 
Quote:
Originally Posted by TwoCables View Post
That's exactly it!

If you are comfortable with formatting your Spinpoint F3, then yes. However, if you don't want to lose what is on there right now, then don't format it.

just steam games. i dont think it's gonna be a problem i can redownload it again.

When you get the SSD, the very first thing you need to do is make absolutely certain that the BIOS is configured to boot from the SSD first instead of the hard drive. So that's one good reason for connecting the SSD to the first SATA port.

so when i get ssd so i need to configure bios in set it for AHCI setting right??

Hard drives have firmware too (so do optical drives).

To be honest, I don't really think it's necessary to update to the latest firmware unless you are having problems that are claimed to be fixed by the new firmware.
hmm well i have never updated firmware and same for optical drives,too. but interested in checking how it work for update firmware if i have a problem
blueduster 922
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 955BE 3.2 (4.0 oced) ghz Gigabyte GA-890GPA-UD3H revision 2.0 Sapphire HD6870 1gb 988/1250 G.SKILL 8GB (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 
Hard DriveOptical DriveOSMonitor
Samsung F3 1tb lite on dvd burner Window 7 home premium 64bit Viewsonic 22inch LED 1080p full HD 
PowerCaseMouseMouse Pad
corsair 750tx coolermaster HAF 922 GM-m6880 gigabyte ghost gaming series 
  hide details  
Reply
blueduster 922
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 955BE 3.2 (4.0 oced) ghz Gigabyte GA-890GPA-UD3H revision 2.0 Sapphire HD6870 1gb 988/1250 G.SKILL 8GB (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 
Hard DriveOptical DriveOSMonitor
Samsung F3 1tb lite on dvd burner Window 7 home premium 64bit Viewsonic 22inch LED 1080p full HD 
PowerCaseMouseMouse Pad
corsair 750tx coolermaster HAF 922 GM-m6880 gigabyte ghost gaming series 
  hide details  
Reply
post #79 of 97
Thread Starter 
just steam games. i dont think it's gonna be a problem i can redownload it again.


so when i get ssd so i need to configure bios in set it for AHCI setting right??
blueduster 922
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 955BE 3.2 (4.0 oced) ghz Gigabyte GA-890GPA-UD3H revision 2.0 Sapphire HD6870 1gb 988/1250 G.SKILL 8GB (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 
Hard DriveOptical DriveOSMonitor
Samsung F3 1tb lite on dvd burner Window 7 home premium 64bit Viewsonic 22inch LED 1080p full HD 
PowerCaseMouseMouse Pad
corsair 750tx coolermaster HAF 922 GM-m6880 gigabyte ghost gaming series 
  hide details  
Reply
blueduster 922
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom x4 955BE 3.2 (4.0 oced) ghz Gigabyte GA-890GPA-UD3H revision 2.0 Sapphire HD6870 1gb 988/1250 G.SKILL 8GB (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 
Hard DriveOptical DriveOSMonitor
Samsung F3 1tb lite on dvd burner Window 7 home premium 64bit Viewsonic 22inch LED 1080p full HD 
PowerCaseMouseMouse Pad
corsair 750tx coolermaster HAF 922 GM-m6880 gigabyte ghost gaming series 
  hide details  
Reply
post #80 of 97
Quote:
Originally Posted by Zerogamer22 View Post
just steam games. i dont think it's gonna be a problem i can redownload it again.
Then don't format it. The only reason I "cleaned" my Falcon is because I wanted to start it fresh before putting all of my irreplaceable files onto it (before moving them over from the VelociRaptor).


Quote:
Originally Posted by lupin_ View Post
so when i get ssd so i need to configure bios in set it for AHCI setting right??
Yep. That will help you get the fullest potential of the SSD.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: SSD
Overclock.net › Forums › Components › Hard Drives & Storage › SSD › i need a recommend to get a ssd.