Originally Posted by BioZeke
Got this figured out...just cleared my CMOS. (Man, its awesome learning stuff as you go!)
So, back to square one. I hope, as I go, I'm increasing the right voltage. Do I upgrade the CPU manual voltage or the CPU/NB manual voltage?
I can't figure out where my instability issue is.
CPU manual voltage...keep in mind though...some CPU's will have wall that is hard to get past. Like my CPU will not go past 4.2 without like 1.57 volts....thats .09 volts more than 4.2.
You may just have to keep tweaking and tweaking.
What BSOD error number are you getting?
Here a list of them and what they mean
0x101 = increase vcore
0x124 = increase/decrease vcore
0x0A = unstable RAM, if that doesn't work increase vcore
0x1E = increase vcore
0x3B = increase vcore
0x9C = try increasing vcore
0x50 = RAM timings/Frequency increase RAM voltage
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x00000109 = Not enough or too Much memory voltage
0x7E = System Drivers issue
0x24 = Disk corruption (Did you OC the PCI-E bus?)
Pulled the list from another thread and edited out some of the intel cpu based things